Skip to contentSkip to conversation

linux: allow own initramfs to be specified

PATCH New Daniel Mack 2 participants 3 messages Jul 27, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 linux: allow own initramfs to be specified

The initramfs source location is removed from the given Linux kernel configuration at the moment and only filled in again in case BR2 is asked to provide a cpio for that feature.

This patch allows to specify an own location for such an image file.

---
 target/linux/Config.in.advanced   |   12 ++++++++++++
 target/linux/Makefile.in.advanced |   13 +++++++++++++
 2 files changed, 25 insertions(+), 0 deletions(-)
target/linux/Config.in.advanced +12 -0
index 3a171b5..53020ac 100644
@@ -429,6 +429,18 @@ config BR2_KERNEL_CONFIG_METHOD
 	default "xconfig"	if BR2_MAKE_XCONFIG
 	default "menuconfig"	if BR2_MAKE_MENUCONFIG
 
+config BR2_PACKAGE_LINUX_INITRAMFS
+	string "initramfs source"
+	depends on BR2_PACKAGE_LINUX
+	help
+	  The initial RAM filesystem is a ramfs which is loaded by the
+	  boot loader (loadlin or lilo) and that is mounted as root
+	  before the normal boot procedure. It is typically used to
+	  load modules needed to mount the "real" root file system,
+	  etc.
+
+	  Specify a path relative to BR2's root folder.
+
 endmenu
 
 choice
target/linux/Makefile.in.advanced +13 -0
index 47a1f4e..71c0eb1 100644
@@ -377,6 +377,19 @@ ifeq ($(BR2_PACKAGE_BUSYBOX_INITRAMFS),y)
 	echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
 	echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
 endif
+ifneq ($(BR2_PACKAGE_LINUX_INITRAMFS),)
+	$(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
+	$(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
+	echo "CONFIG_BLK_DEV_INITRD=y" >> $(LINUX26_DIR)/.config
+	echo "CONFIG_INITRAMFS_COMPRESSION_GZIP=y" >> $(LINUX26_DIR)/.config
+	echo "# CONFIG_INITRAMFS_COMPRESSION_NONE is not set" >> $(LINUX26_DIR)/.config
+	echo "# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set" >> $(LINUX26_DIR)/.config
+	echo "# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set" >> $(LINUX26_DIR)/.config
+	echo "CONFIG_INITRAMFS_SOURCE=\"$(PWD)/$(BR2_PACKAGE_LINUX_INITRAMFS)\"" >> \
+		$(LINUX26_DIR)/.config
+	echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
+	echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
+endif
 	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
 	touch $@
 
Signature · 1 line
1.6.3.1
#1 lore raw

PATCH 1/1 linux: allow own initramfs to be specified

Le Mon, 27 Jul 2009 15:45:30 +0200,
Daniel Mack <[email protected]> a ?crit :

Quoted 5 lines

The initramfs source location is removed from the given Linux kernel configuration at the moment and only filled in again in case BR2 is asked to provide a cpio for that feature.

This patch allows to specify an own location for such an image file.

Just curious, what's the use case for this ?

Buildroot already allows to integrate the root filesystem it generated into the initramfs. It seems your patch allows to integrate a different initramfs that the one generated by Buildroot. Is this correct ? If so, what's your use case ?

Thanks!

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers and embedded Linux development,
consulting, training and support.
http://free-electrons.com
#2 lore raw

PATCH 1/1 linux: allow own initramfs to be specified

Quoted 7 lines · Thomas Petazzoni

Le Mon, 27 Jul 2009 15:45:30 +0200,
Daniel Mack <[email protected]> a ?crit :

Quoted 4 lines

The initramfs source location is removed from the given Linux kernel configuration at the moment and only filled in again in case BR2 is asked to provide a cpio for that feature.

Quoted 8 lines
Quoted 1 line

This patch allows to specify an own location for such an image file.

Just curious, what's the use case for this ?

Buildroot already allows to integrate the root filesystem it generated into the initramfs. It seems your patch allows to integrate a different initramfs that the one generated by Buildroot. Is this correct ? If so, what's your use case ?

Yep, you're right. We should do it that way. I was thinking of offering a way to let a precompiled cpio image become the initramfs of the built kernel, but it is really better to let br2 handle it all.

There are, however, two problems with the existing code.

1) the linux modules are installed unconditionally which we must avoid our case
2) the initramfs target is currently broken

So, forget about this patch, I'll provide two new ones to make this work.

Thanks,
Daniel