Skip to contentSkip to conversation

mpc83xx: Add esd VME8349 board support

PATCH New Stefan Roese 2 participants 2 messages Jul 25, 2009 – Jul 27, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 mpc83xx: Add esd VME8349 board support

From: Reinhard Arlt <[email protected]>

This patch adds support for the esd VME8349 board equipped with the MPC8349. It's a VME PMC carrier board equipped with the Tundra TSI148 VME-bridge.

---
v3:
- code cleanup in switch statement in caddy.c as suggested by Wolfgang
- defines instead of hex numbers for SDRAM setup used
- too long lines fixed
- dead code removed
- serverip/gatewayip from config header removed
- Freescales PCI vendor ID used

v2:
- respect the original copyright holder(s)
- typedefs in caddy.h removed
- aduc.c removed
- memset used
- converted to use 83XX_GENERIC_PCI code
- CONFIG_SYS_SICRH set to 0
- hardcoded MAC and IP addresses removed

 MAINTAINERS                 |    2 +
 MAKEALL                     |    1 +
 Makefile                    |    2 +
 board/esd/vme8349/Makefile  |   54 ++++
 board/esd/vme8349/caddy.c   |  194 ++++++++++++++
 board/esd/vme8349/caddy.h   |   77 ++++++
 board/esd/vme8349/config.mk |   28 ++
 board/esd/vme8349/pci.c     |  119 +++++++++
 board/esd/vme8349/vme8349.c |  140 ++++++++++
 drivers/pci/pci_auto.c      |    2 +-
 include/configs/vme8349.h   |  609 +++++++++++++++++++++++++++++++++++++++++++
 11 files changed, 1227 insertions(+), 1 deletions(-)
 create mode 100644 board/esd/vme8349/Makefile
 create mode 100644 board/esd/vme8349/caddy.c
 create mode 100644 board/esd/vme8349/caddy.h
 create mode 100644 board/esd/vme8349/config.mk
 create mode 100644 board/esd/vme8349/pci.c
 create mode 100644 board/esd/vme8349/vme8349.c
 create mode 100644 include/configs/vme8349.h
MAINTAINERS +2 -0
index 17b2f9c..45f5f26 100644
@@ -32,6 +32,8 @@ Reinhard Arlt <[email protected]>
 	mecp5200	MPC5200
 	pf5200		MPC5200
 
+	vme8349		MPC8349
+
 	CPCI750		PPC750FX/GX
 
 Yuli Barcohen <[email protected]>
MAKEALL +1 -0
index d38904a..b3927d5 100755
@@ -362,6 +362,7 @@ LIST_83xx="		\
 	sbc8349		\
 	SIMPC8313_LP	\
 	TQM834x		\
+	vme8349		\
 "
 
 
Makefile +2 -0
index 2320db6..f710b6f 100644
@@ -2371,6 +2371,8 @@ SIMPC8313_SP_config: unconfig
 TQM834x_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
 
+vme8349_config:		unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx vme8349 esd
 
 #########################################################################
 ## MPC85xx Systems
board/esd/vme8349/Makefile new file +54 -0

54 lines not on this page · raw message

board/esd/vme8349/caddy.c new file +194 -0

194 lines not on this page · raw message

board/esd/vme8349/caddy.h new file +77 -0

77 lines not on this page · raw message

board/esd/vme8349/config.mk new file +28 -0
new file mode 100644
index 0000000..1ae26ca
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# VME8349E
+#
+
+TEXT_BASE  =   0xFFF00000
board/esd/vme8349/pci.c new file +119 -0

119 lines not on this page · raw message

board/esd/vme8349/vme8349.c new file +140 -0

140 lines not on this page · raw message

drivers/pci/pci_auto.c +1 -1
index 35c82b9..82e4eed 100644
@@ -403,7 +403,7 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
 		       PCI_DEV(dev));
 		break;
 #endif
-#ifdef CONFIG_MPC834x
+#if defined(CONFIG_MPC834x) && !defined(CONFIG_VME8349)
 	case PCI_CLASS_BRIDGE_OTHER:
 		/*
 		 * The host/PCI bridge 1 seems broken in 8349 - it presents
include/configs/vme8349.h new file +609 -0

609 lines not on this page · raw message

Signature · 1 line
1.6.3.3
#1 lore raw

PATCH v3 1/1 mpc83xx: Add esd VME8349 board support

Quoted 6 lines · On Sat, 25 Jul 2009 06:19:12 +0200 Stefan Roese <[email protected]> wrote:

From: Reinhard Arlt <[email protected]>

This patch adds support for the esd VME8349 board equipped with the MPC8349. It's a VME PMC carrier board equipped with the Tundra TSI148 VME-bridge.

Quoted 6 lines

---

+#define CONFIG_83XX_GENERIC_PCI

applied after taking this line out (one only has to CONFIG_PCI now).

Kim