alchemy: pass PHY informations to au1000_eth
PATCH 3/4 alchemy: pass PHY informations to au1000_eth
This patch completes the au1000_eth platform device conversion by passing PHY informations to the au1000_eth driver. In order not to break boards, we maintain the Bosporus specific configuration. Tested on Meshcube.
Signed-off-by Florian Fainelli <[email protected]>
---
arch/mips/alchemy/common/platform.c +21 -0
@@ -19,6 +19,7 @@#include <asm/mach-au1x00/au1xxx.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-au1x00/au1100_mmc.h> +#include <asm/mach-au1x00/au1xxx_eth.h> #define PORT (_base, _irq) \ { \
@@ -370,14 +371,20 @@ static struct resource au1xxx_eth1_resources[] = {#endif }; +static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { + .phy1_search_mac0 =1 , +}; +static struct platform_device au1xxx_eth0_device = { .name ="au1000-eth" , .id =0 , .num_resources =ARRAY_SIZE (au1xxx_eth0_resources), .resource = au1xxx_eth0_resources, + .dev.platform_data = &au1xxx_eth0_platform_data, };#ifndef CONFIG_SOC_AU1100 +/* We do not pass a platform_data structure to MAC1 to assume defaults */ static struct platform_device au1xxx_eth1_device = { .name ="au1000-eth" , .id = 1,
@@ -418,6 +425,20 @@ static int __init au1xxx_platform_init(void)for (i =0 ; au1x00_uart_data[i].flags; i++) au1x00_uart_data[i].uartclk = uartclk; +#ifdef CONFIG_MIPS_BOSPORUS +/* +* Micrel/Kendin 5 port switch attached to MAC0, +* MAC0 is associated with PHY address 5 (== WAN port) +* MAC1 is not associated with any PHY, since it's connected directly +* to the switch. +* no interrupts are used +*/ + au1xxx_eth0_platform_data.phy1_search_mac0 =0 ; + au1xxx_eth0_platform_data.phy_static_config =1 ; + au1xxx_eth0_platform_data.phy_addr =5 ; + au1xxx_eth0_platform_data.phy_busid =0 ; +#endif +/* Register second MAC if enabled in pinfunc */ #ifndef CONFIG_SOC_AU1100 ni = (int )((au_readl (SYS_PINFUNC ) & (u32)(SYS_PF_NI2 )) >>4 );
arch/mips/include/asm/mach-au1x00/au1xxx_eth.h new file +15 -0
@@ -0,0 +1,15 @@ +#ifndef __AU1X00_ETH_PDATA_H +#define __AU1X00_ETH_PDATA_H + +/* Platform specific PHY configuration passed to the MAC driver */ +struct au1000_eth_platform_data { +int phy_static_config; +int phy_search_highest_addr; +int phy1_search_mac0; +int phy_addr; +int phy_busid; +int phy_irq; +}; + +#endif /* __AU1X00_ETH_PDATA_H */ +