Skip to contentSkip to conversation

ppc4xx: Support PPC460EX rev B on gdsys CompactCenter

PATCH New Dirk Eibach 2 participants 2 messages Jul 30, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ppc4xx: Support PPC460EX rev B on gdsys CompactCenter

This patch is based on a patch for canyonlands by Stefan Roese.

---
 board/gdsys/compactcenter/compactcenter.c |   16 ++++++++++++----
 1 files changed, 12 insertions(+), 4 deletions(-)
board/gdsys/compactcenter/compactcenter.c +12 -4
index 477ef70..4861cc8 100644
@@ -39,10 +39,19 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define CONFIG_SYS_BCSR3_PCIE		0x10
 
-int board_early_init_f(void)
+static int pvr_460ex(void)
 {
 	u32 pvr = get_pvr();
 
+	if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA) ||
+	    (pvr == PVR_460EX_RB))
+		return 1;
+
+	return 0;
+}
+
+int board_early_init_f(void)
+{
 	/*
 	 * Setup the interrupt controller polarities, triggers, etc.
 	 */
@@ -95,7 +104,7 @@ int board_early_init_f(void)
 	mtdcr(AHB_TOP, 0x8000004B);
 	mtdcr(AHB_BOT, 0x8000004B);
 
-	if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) {
+	if (pvr_460ex()) {
 		/*
 		 * Configure USB-STP pins as alternate and not GPIO
 		 * It seems to be neccessary to configure the STP pins as GPIO
@@ -250,7 +259,6 @@ int misc_init_r(void)
 {
 	u32 sdr0_srst1 = 0;
 	u32 eth_cfg;
-	u32 pvr = get_pvr();
 
 	/*
 	 * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
@@ -264,7 +272,7 @@ int misc_init_r(void)
 	/* Set the for 2 RGMII mode */
 	/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
 	eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
-	if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA))
+	if (pvr_460ex())
 		eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
 	else
 		eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
Signature · 1 line
1.5.6.5
#1 lore raw

PATCH 1/1 ppc4xx: Support PPC460EX rev B on gdsys CompactCenter

Hi Dirk,

Quoted 16 lines · On Thursday 30 July 2009 08:46:16 Dirk Eibach wrote:

This patch is based on a patch for canyonlands by Stefan Roese.

---
 board/gdsys/compactcenter/compactcenter.c |   16 ++++++++++++----
 1 files changed, 12 insertions(+), 4 deletions(-)
(quoted diff) +0 -0

b/board/gdsys/compactcenter/compactcenter.c index 477ef70..4861cc8 100644

board/gdsys/compactcenter/compactcenter.c +0 -1
@@ -39,10 +39,19 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define CONFIG_SYS_BCSR3_PCIE		0x10
 
-int board_early_init_f(void)

board/gdsys/compactcenter/compactcenter.c DECLARE_GLOBAL_DATA_PTR; · line 51

Quoted 10 lines
board/gdsys/compactcenter/compactcenter.c +7 -0
+static int pvr_460ex(void)
 {
 	u32 pvr = get_pvr();
 
+	if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA) ||
+	    (pvr == PVR_460EX_RB))
+		return 1;
+
+	return 0;
+}

Do you really need this 460EX check at all on your boards? It's only needed on Canyonlands since this board port also support Glacier 460GT. From looking at your port, you don't need to support 460GT at all. So you could easily drop all these 460EX checks in your code.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================