Skip to contentSkip to conversation

how to add mmc/sd support in 6410 u-boot?

U-Boot Michael Lin 2 participants 2 messages Jul 30, 2009

lore
Share & tools
lore
#0 lore raw

hello, everyone.
Has somebody ported U-boot to s3c6410? I want add mmc/sd reading and writing in 6410 u-boot. Can somebody give me some hints? Thanks in advance.

--------------
Michael L.
Jul 30, 2009

#1 lore raw

Hi Michael,

In the latest version, mmc is implemented in driver/mmc.

If 6410 is not supported in current uboot, then what you need to do is:

1). Add hardware init code, like iomux and clock in your board init files. 2). Add host operation code. Maybe you can refer to fsl_esdhc.c. 3). Test and debug.

Thanks~~

Yours
Terry

-----Original Message-----
From: [email protected] [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Michael Lin
Sent: 2009?7?30? 12:33
To: u-boot
Subject: [U-Boot] how to add mmc/sd support in 6410 u-boot?

hello, everyone.
Has somebody ported U-boot to s3c6410? I want add mmc/sd reading and writing in 6410 u-boot. Can somebody give me some hints? Thanks in advance.

--------------
Michael L.
Jul 30, 2009

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot