Skip to contentSkip to conversation

v2.6.31-rc5 watchdog fix

WATCHDOG Wim Van Sebroeck 1 participant 1 message Aug 2, 2009 Watchdog device drivers

lore
Share & tools
lore
#0 lore raw

Hi Linus,

Please pull from 'master' branch of
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
or if master.kernel.org hasn't synced up yet:
master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git

This will update the following files:

 drivers/watchdog/coh901327_wdt.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

with these Changes:

Author: Linus Walleij <[email protected]>
Date:   Tue Jul 21 00:40:46 2009 +0200

[WATCHDOG] Fix COH 901 327 watchdog enablement

Since the COH 901 327 found in U300 is clocked at 32 kHz we need to wait for the interrupt clearing flag to propagate through hardware in order not to accidentally fire off any interrupts when we enable them.

The Changes can also be looked at on:

	http://www.kernel.org/git/?p=linux/kernel/git/wim/linux-2.6-watchdog.git;a=summary

For completeness, I added the overal diff below.

Greetings,
Wim.

================================================================================

drivers/watchdog/coh901327_wdt.c +11 -0
index fecb307..aec7cef 100644
@@ -18,6 +18,7 @@
 #include <linux/bitops.h>
 #include <linux/uaccess.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 
 #define DRV_NAME "WDOG COH 901 327"
 
@@ -92,6 +93,8 @@ static struct clk *clk;
 static void coh901327_enable(u16 timeout)
 {
 	u16 val;
+	unsigned long freq;
+	unsigned long delay_ns;
 
 	clk_enable(clk);
 	/* Restart timer if it is disabled */
@@ -102,6 +105,14 @@ static void coh901327_enable(u16 timeout)
 	/* Acknowledge any pending interrupt so it doesn't just fire off */
 	writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
 	       virtbase + U300_WDOG_IER);
+	/*
+	 * The interrupt is cleared in the 32 kHz clock domain.
+	 * Wait 3 32 kHz cycles for it to take effect
+	 */
+	freq = clk_get_rate(clk);
+	delay_ns = (1000000000 + freq - 1) / freq; /* Freq to ns and round up */
+	delay_ns = 3 * delay_ns; /* Wait 3 cycles */
+	ndelay(delay_ns);
 	/* Enable the watchdog interrupt */
 	writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
 	/* Activate the watchdog timer */