icom: convert space to tabs
PATCH 2/5 icom: convert space to tabs
From: Breno Leitao <[email protected]>
Convert spaces to tabs and remove wrong spaces
Signed-off-by Breno Leitao <[email protected]>
Cc Scott Kilau <[email protected]>
Cc Jiri Slaby <[email protected]>
Signed-off-by Andrew Morton <[email protected]>
---
drivers/serial/icom.c | 54 +++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 28 deletions(-)
drivers/serial/icom.c renamed from drivers/serial/icom.c~icom-converting-space-to-tabs +26 -28
@@ -307,7 +307,7 @@ static void stop_processor(struct icom_pif (port <4 ) { temp =readl (stop_proc[port].global_control_reg); temp = - (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; + (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id;writel (temp, stop_proc[port].global_control_reg);/* write flush */
@@ -336,7 +336,7 @@ static void start_processor(struct icom_if (port <4 ) { temp =readl (start_proc[port].global_control_reg); temp = - (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; + (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id;writel (temp, start_proc[port].global_control_reg);/* write flush */
@@ -509,8 +509,8 @@ static void load_code(struct icom_port *dev_err (&icom_port->adapter->pci_dev->dev,"Port not opertional\n" ); } -if (new_page !=NULL ) -pci_free_consistent (dev,4096 , new_page, temp_pci); +if (new_page !=NULL ) +pci_free_consistent (dev,4096 , new_page, temp_pci); }static int startup (struct icom_port *icom_port)
@@ -1493,15 +1493,15 @@ static int __devinit icom_probe(struct p const struct pci_device_id *ent) {int index; -unsigned int command_reg; -int retval; -struct icom_adapter *icom_adapter; -struct icom_port *icom_port; +unsigned int command_reg; +int retval; +struct icom_adapter *icom_adapter; +struct icom_port *icom_port; - retval =pci_enable_device (dev); -if (retval) { + retval =pci_enable_device (dev); +if (retval) {dev_err (&dev->dev,"Device enable FAILED\n" ); -return retval; +return retval; }if ( (retval =pci_request_regions (dev,"icom" ))) {
@@ -1510,23 +1510,23 @@ static int __devinit icom_probe(struct preturn retval; } -pci_set_master (dev); +pci_set_master (dev); -if ( (retval =pci_read_config_dword (dev,PCI_COMMAND , &command_reg))) { +if ( (retval =pci_read_config_dword (dev,PCI_COMMAND , &command_reg))) {dev_err (&dev->dev,"PCI Config read FAILED\n" ); -return retval; - } +return retval; + }pci_write_config_dword (dev,PCI_COMMAND , command_reg |PCI_COMMAND_MEMORY |PCI_COMMAND_MASTER |PCI_COMMAND_PARITY |PCI_COMMAND_SERR ); -if (ent->driver_data ==ADAPTER_V1 ) { +if (ent->driver_data ==ADAPTER_V1 ) {pci_write_config_dword (dev,0x44 ,0x8300830A ); - }else { + }else {pci_write_config_dword (dev,0x44 ,0x42004200 );pci_write_config_dword (dev,0x48 ,0x42004200 ); - } + } retval =icom_alloc_adapter (&icom_adapter);
@@ -1536,10 +1536,10 @@ static int __devinit icom_probe(struct p goto probe_exit0; } - icom_adapter->base_addr_pci =pci_resource_start (dev,0 ); - icom_adapter->pci_dev = dev; - icom_adapter->version = ent->driver_data; - icom_adapter->subsystem_id = ent->subdevice; + icom_adapter->base_addr_pci =pci_resource_start (dev,0 ); + icom_adapter->pci_dev = dev; + icom_adapter->version = ent->driver_data; + icom_adapter->subsystem_id = ent->subdevice; retval =icom_init_ports (icom_adapter);
@@ -1548,7 +1548,7 @@ static int __devinit icom_probe(struct p goto probe_exit1; } - icom_adapter->base_addr =pci_ioremap_bar (dev,0 ); + icom_adapter->base_addr =pci_ioremap_bar (dev,0 );if (!icom_adapter->base_addr) goto probe_exit1;
@@ -1562,7 +1562,7 @@ static int __devinit icom_probe(struct p retval =icom_load_ports (icom_adapter); -for (index =0 ; index < icom_adapter->numb_ports; index++) { +for (index =0 ; index < icom_adapter->numb_ports; index++) { icom_port = &icom_adapter->port_info[index];if (icom_port->status ==ICOM_PORT_ACTIVE ) {
@@ -1579,7 +1579,7 @@ static int __devinit icom_probe(struct p icom_port->status =ICOM_PORT_OFF ;dev_err (&dev->dev,"Device add failed\n" ); }else -dev_info (&dev->dev,"Device added\n" ); +dev_info (&dev->dev,"Device added\n" ); } }
@@ -1595,9 +1595,7 @@ probe_exit0:pci_release_regions (dev);pci_disable_device (dev); -return retval; - - +return retval; } static void __devexit icom_remove(struct pci_dev *dev)
_