Skip to contentSkip to conversation

Handling of environment settings

U-Boot Alex Dubov 2 participants 2 messages Aug 7, 2009

lore
Share & tools
lore

Alex Dubov

author
#0 lore raw

Until now, custom environment settings were just defined in the board config file. All that had to be done is to edit the file, recompile the u-boot and flash it to the target.

Now, however, this approach is not longer acceptable. This means, that environment must be either set manually on the target or maintained and flashed as a separate blob, which is considerably less convenient.

So, two question here:
1. Is there a tool already which takes an environment description in some form and produces a flashable blob?
2. If not, is there some extra include file which is considered volatile and can hold user-defined environment settings?

#1 lore raw

Dear Alex Dubov,

Quoted 4 lines · In message <[email protected]> you wrote:

Until now, custom environment settings were just defined in the board config file. All that had to be done is to edit the file, recompile the u-boot and flash it to the target.

Sounds a bit cumbersome...

Quoted 3 lines

Now, however, this approach is not longer acceptable. This means, that environment must be either set manually on the target or maintained and flashed as a separate blob, which is considerably less convenient.

either ... or ...? There are many alternative approaches.

Quoted 3 lines

So, two question here:
1. Is there a tool already which takes an environment description in some form and produces a flashable blob?

Yes, several, actually.

If you insist on a binary blob, tools/envcrc has a --binary option to export the embedded environment as a binary blob.

However, I'd recommend to put your environment settings into a text file and create a script file from it, which you can then load and run on the target.

Quoted 2 lines

2. If not, is there some extra include file which is considered volatile and can hold user-defined environment settings?

No.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Minds are like parachutes - they only function when open.