Skip to contentSkip to conversation

omap2: compile usb-tusb6010.c

PATCH New Kalle Valo 2 participants 2 messages Aug 7, 2009 – Aug 10, 2009

Subsystems (3)
Arm (32-bit) Arm sub-architectures OMAP2+ support
lore
Share & tools
lore

Kalle Valo

author
#0 lore raw

PATCH 1/1 omap2: compile usb-tusb6010.c

For some reason usb-tusb6010.c was't compiled, add it to Makefile and Kconfig. This is prepraration for upcoming n8x0 support.

Signed-off-by Kalle Valo <[email protected]>

---

 arch/arm/mach-omap2/Kconfig  |    5 +++++
 arch/arm/mach-omap2/Makefile |    1 +
 2 files changed, 6 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/Kconfig +5 -0
index a755eb5..bf54686 100644
@@ -31,6 +31,11 @@ config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
 
+config MACH_OMAP2_TUSB6010
+	bool
+	depends on ARCH_OMAP2 && ARCH_OMAP2420
+	default y if MACH_NOKIA_N8X0
+
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
arch/arm/mach-omap2/Makefile +1 -0
index 735bae5..757c84b 100644
@@ -74,6 +74,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
 # Platform specific device init code
 obj-y					+= usb-musb.o
+obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
maintainer
#1 lore raw

PATCH 1/1 omap2: compile usb-tusb6010.c

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Branch in linux-omap: omap-upstream

Initial commit ID (Likely to change): c3459357f00c2759c4e09ce1440f10eafad0e24c

PatchWorks
http://patchwork.kernel.org/patch/39916/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=c3459357f00c2759c4e09ce1440f10eafad0e24c