bcm63xx: register GPIO-connected LEDs for known references designs
PATCH 3/8 bcm63xx: register GPIO-connected LEDs for known references designs
This patch makes the board code register GPIO-connected LEDs for which we know the mapping since they are reference designs.
Signed-off-by Florian Fainelli <[email protected]>
---
arch/mips/bcm63xx/boards/board_bcm963xx.c +180 -0
@@ -51,6 +51,36 @@ static struct board_info __initdata board_96348r = { .has_phy = 1, .use_internal_phy = 1, }, + + .leds = { + { + .name = "adsl-fail", + .gpio = 2, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, }; static struct board_info __initdata board_96348gw_10 = {
@@ -81,6 +111,35 @@ static struct board_info __initdata board_96348gw_10 = { .cs = 2, .ext_irq = 2, }, + + .leds = { + { + .name = "adsl-fail", + .gpio = 2, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, }; static struct board_info __initdata board_96348gw_11 = {
@@ -105,6 +164,35 @@ static struct board_info __initdata board_96348gw_11 = { .has_ohci0 = 1, .has_pccard = 1, .has_ehci0 = 1, + + .leds = { + { + .name = "adsl-fail", + .gpio = 2, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, }; static struct board_info __initdata board_96348gw = {
@@ -133,6 +221,35 @@ static struct board_info __initdata board_96348gw = { .ext_irq = 2, .cs = 2, }, + + .leds = { + { + .name = "adsl-fail", + .gpio = 2, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, }; static struct board_info __initdata board_FAST2404 = {
@@ -225,6 +342,33 @@ static struct board_info __initdata board_96358vw = { .has_ohci0 = 1, .has_pccard = 1, .has_ehci0 = 1, + + .leds = { + { + .name = "adsl-fail", + .gpio = 15, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 22, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 23, + .active_low = 1, + }, + { + .name = "power", + .gpio = 4, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 5, + }, + }, }; static struct board_info __initdata board_96358vw2 = {
@@ -249,6 +393,29 @@ static struct board_info __initdata board_96358vw2 = { .has_ohci0 = 1, .has_pccard = 1, .has_ehci0 = 1, + + .leds = { + { + .name = "adsl", + .gpio = 22, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 23, + }, + { + .name = "power", + .gpio = 5, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 4, + .active_low = 1, + }, + }, }; static struct board_info __initdata board_AGPFS0 = {
@@ -505,6 +672,14 @@ static struct ssb_sprom bcm63xx_sprom = { };#endif +static struct gpio_led_platform_data bcm63xx_led_data; + +static struct platform_device bcm63xx_gpio_leds = { + .name ="leds-gpio" , + .id =0 , + .dev.platform_data = &bcm63xx_led_data, +}; +/* * third stage init callback, register all board devices. */
@@ -553,6 +728,11 @@ int __init board_register_devices(void)platform_device_register (&mtd_dev); + bcm63xx_led_data.num_leds =ARRAY_SIZE (board.leds); + bcm63xx_led_data.leds = board.leds; + +platform_device_register (&bcm63xx_gpio_leds); +return 0 ; }
arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h +5 -0
@@ -2,6 +2,8 @@#define BOARD_BCM963XX_H_ #include <linux/types.h> +#include <linux/gpio.h> +#include <linux/leds.h> #include <bcm63xx_dev_enet.h> #include <bcm63xx_dev_dsp.h>
@@ -50,6 +52,9 @@ struct board_info {/* DSP config */ struct bcm63xx_dsp_platform_data dsp; + +/* GPIO LEDs */ + struct gpio_led leds[5]; };#endif /* ! BOARD_BCM963XX_H_ */
On Fri, Aug 07, 2009 at 11:46:40PM +0200, Florian Fainelli wrote:
Folded into "MIPS: BCM63XX: Add board support code."
Thanks!
Ralf