Issues with Empire Dual Pen: request for help and suggestions!!!
Hi to all,
I've an Empire Dual Pen usb device.
Up to now I've used Markus driver, but now I've tried to switch to the v4l-dvb driver.
However I've the following issues:
1) the card is not recognized automatically so I've to modprobe the em28xx module with the parameter card=66
2) when scanning for analog tv channels with tvtime-scanner, the system hangs and since the alt+Sys+REISUB procedure does not help, I have to turn off the pc (very, very, very bad)
3) digital tv channels are not tuned by kaffeine (SNR value is always zero).
So the device is not usable.
Can it be fixed or is it better to buy an already supported device? Inthe second case which device can you suggest me? Is this device:
http://www.terratec.net/en/products/technical-data/produkte_technische_daten_en_87128.html
supported by the latest v4l drivers.
Thank you for your help,
Xwang
PS: I live in Italy and I use kubuntu 9.04 amd64
Hi,
I want to inform you that thanks to Douglas Schilling Landgraf, the first point (automatic recognition of the device when plugged in) ha been resolved (using his development tree driver).
I've tried to scan for digital channels again and the result has not changed but in the dmesg attached there are a lot of messages created during the scan process. I hope they are useful to solve at list the issue related with the digital scanning. Thank you,
Xwang
[email protected] ha scritto:
Quoted 12 lines
Hi to all,
I've an Empire Dual Pen usb device.
Up to now I've used Markus driver, but now I've tried to switch to the v4l-dvb driver.
However I've the following issues:
1) the card is not recognized automatically so I've to modprobe the em28xx module with the parameter card=66
2) when scanning for analog tv channels with tvtime-scanner, the system hangs and since the alt+Sys+REISUB procedure does not help, I have to turn off the pc (very, very, very bad)
3) digital tv channels are not tuned by kaffeine (SNR value is always zero).
So the device is not usable.
Can it be fixed or is it better to buy an already supported device? Inthe second case which device can you suggest me? Is this device:
http://www.terratec.net/en/products/technical-data/produkte_technische_daten_en_87128.html
Quoted 6 lines
supported by the latest v4l drivers.
Thank you for your help,
XwangPS: I live in Italy and I use kubuntu 9.04 amd64
andreak@pro5av:~$ dmesg [ 1142.664103] usb 2-3: new high speed USB device using ehci_hcd and address 6 [ 1142.800169] usb 2-3: configuration #1 chosen from 1 choice [ 1142.839851] Linux video capture interface: v2.00 [ 1142.875566] em28xx: New device USB 2881 Device @ 480 Mbps (eb1a:e310, interface 0, class 0) [ 1142.875576] em28xx #0: Identified as MSI DigiVox A/D (card=49) [ 1142.879192] em28xx #0: chip ID is em2882/em2883 [ 1143.034939] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 10 e3 d0 12 5c 03 6a 22 00 00 [ 1143.034961] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 00 00 00 00 00 00 00 00 00 00 [ 1143.034981] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00 [ 1143.034999] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 [ 1143.035018] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1143.035037] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1143.035055] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [ 1143.035074] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 44 00 [ 1143.035092] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [ 1143.035111] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1143.035129] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1143.035147] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1143.035166] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1143.035184] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1143.035202] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1143.035220] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1143.035242] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x166a0441 [ 1143.035246] em28xx #0: EEPROM info: [ 1143.035248] em28xx #0: AC97 audio (5 sample rates) [ 1143.035252] em28xx #0: 500mA max power [ 1143.035256] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000 [ 1143.035262] em28xx #0: Your board has no unique USB ID. [ 1143.035268] em28xx #0: A hint were successfully done, based on eeprom hash. [ 1143.035272] em28xx #0: This method is not 100% failproof. [ 1143.035276] em28xx #0: If the board were missdetected, please email this log to: [ 1143.035280] em28xx #0: V4L Mailing List <[email protected]> [ 1143.035284] em28xx #0: Board detected as Empire dual TV [ 1143.112863] tvp5150 6-005c: chip found @ 0xb8 (em28xx #0) [ 1143.120239] tuner 6-0061: chip found @ 0xc2 (em28xx #0) [ 1143.134348] xc2028 6-0061: creating new instance [ 1143.134354] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner [ 1143.134368] usb 2-3: firmware: requesting xc3028-v27.fw [ 1143.145494] xc2028 6-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 1143.205066] xc2028 6-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [ 1144.153950] xc2028 6-0061: Loading firmware for type=MTS (4), id 000000000000b700. [ 1144.169462] xc2028 6-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [ 1144.352314] em28xx #0: Config register raw data: 0xd0 [ 1144.353076] em28xx #0: AC97 vendor ID = 0xffffffff [ 1144.353431] em28xx #0: AC97 features = 0x6a90 [ 1144.353435] em28xx #0: Empia 202 AC97 audio processor detected [ 1144.476568] tvp5150 6-005c: tvp5150am1 detected. [ 1144.572941] em28xx #0: v4l2 driver version 0.1.2 [ 1144.655055] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 [ 1144.668085] em28xx video device (eb1a:e310): interface 1, class 255 found. [ 1144.668091] em28xx This is an anciliary interface not used by the driver [ 1144.668132] usbcore: registered new interface driver em28xx [ 1144.668139] em28xx driver loaded [ 1144.712837] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 1144.712842] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 1144.713462] Em28xx: Initialized (Em28xx Audio Extension) extension [ 1144.833828] xc2028 6-0061: attaching existing instance [ 1144.833830] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner [ 1144.833832] em28xx #0/2: xc3028 attached [ 1144.833834] DVB: registering new adapter (em28xx #0) [ 1144.833836] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 1144.834100] Successfully loaded em28xx-dvb [ 1144.834102] Em28xx: Initialized (Em28xx dvb Extension) extension [ 1144.940531] tvp5150 6-005c: tvp5150am1 detected. [ 1165.852073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1166.801941] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1166.815446] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1166.849947] xc2028 6-0061: Incorrect readback of firmware version. [ 1166.964093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1167.910948] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1167.924445] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1167.957945] xc2028 6-0061: Incorrect readback of firmware version. [ 1169.160071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1170.106946] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1170.120320] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1170.153823] xc2028 6-0061: Incorrect readback of firmware version. [ 1170.268088] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1171.217827] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1171.231223] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1171.261821] xc2028 6-0061: Incorrect readback of firmware version. [ 1172.400072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1173.357823] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1173.371448] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1173.405948] xc2028 6-0061: Incorrect readback of firmware version. [ 1173.520093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1174.481951] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1174.495446] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1174.529945] xc2028 6-0061: Incorrect readback of firmware version. [ 1175.737071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1176.697954] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1176.711442] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1176.745820] xc2028 6-0061: Incorrect readback of firmware version. [ 1176.860069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1177.810953] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1177.824573] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1177.857946] xc2028 6-0061: Incorrect readback of firmware version. [ 1179.001068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1179.950822] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1179.964574] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1179.997819] xc2028 6-0061: Incorrect readback of firmware version. [ 1180.112090] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1181.077951] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1181.091466] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1181.125810] xc2028 6-0061: Incorrect readback of firmware version. [ 1182.328066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1183.273827] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1183.287324] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1183.317818] xc2028 6-0061: Incorrect readback of firmware version. [ 1183.433066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1184.377830] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1184.391351] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1184.426615] xc2028 6-0061: Incorrect readback of firmware version. [ 1185.564067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1186.517955] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1186.530977] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1186.561812] xc2028 6-0061: Incorrect readback of firmware version. [ 1186.676063] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1187.629950] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1187.643470] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1187.677947] xc2028 6-0061: Incorrect readback of firmware version. [ 1188.880096] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1189.821828] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1189.835450] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1189.869948] xc2028 6-0061: Incorrect readback of firmware version. [ 1189.992069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1190.941832] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1190.955319] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1190.985850] xc2028 6-0061: Incorrect readback of firmware version. [ 1192.124070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1193.066956] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1193.080453] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1193.113950] xc2028 6-0061: Incorrect readback of firmware version. [ 1193.232099] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1194.173832] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1194.187353] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1194.219991] xc2028 6-0061: Incorrect readback of firmware version. [ 1195.424097] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1196.369955] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1196.383322] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1196.424838] xc2028 6-0061: Incorrect readback of firmware version. [ 1196.540072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1197.506827] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1197.520452] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1197.553949] xc2028 6-0061: Incorrect readback of firmware version. [ 1198.696070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1199.645956] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1199.659314] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1199.689852] xc2028 6-0061: Incorrect readback of firmware version. [ 1199.804068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1200.753832] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1200.767104] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1200.797825] xc2028 6-0061: Incorrect readback of firmware version. [ 1202.000077] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1202.969833] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1202.983322] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1203.013821] xc2028 6-0061: Incorrect readback of firmware version. [ 1203.128070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1204.069957] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1204.083447] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1204.117825] xc2028 6-0061: Incorrect readback of firmware version. [ 1205.257068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1206.201957] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1206.215449] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1206.249825] xc2028 6-0061: Incorrect readback of firmware version. [ 1206.364071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1207.325831] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1207.339356] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1207.369950] xc2028 6-0061: Incorrect readback of firmware version. [ 1208.576106] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1209.521829] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1209.535218] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1209.565951] xc2028 6-0061: Incorrect readback of firmware version. [ 1209.680071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1210.633955] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1210.647572] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1210.681825] xc2028 6-0061: Incorrect readback of firmware version. [ 1211.820072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1212.773958] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1212.787482] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1212.821950] xc2028 6-0061: Incorrect readback of firmware version. [ 1212.936091] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1213.905960] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1213.919449] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1213.949950] xc2028 6-0061: Incorrect readback of firmware version. [ 1215.152072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1216.110834] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1216.124198] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1216.157822] xc2028 6-0061: Incorrect readback of firmware version. [ 1216.272089] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1217.221101] xc2028 6-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 1217.238324] xc2028 6-0061: Loading SCODE for type=SCODE HAS_IF_5260 (60000000), id 0000000000000000. [ 1217.269827] xc2028 6-0061: Incorrect readback of firmware version. [ 1218.408071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1219.353954] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1219.367594] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1219.402328] xc2028 6-0061: Incorrect readback of firmware version. [ 1219.516068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1220.469691] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1220.482560] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1220.513827] xc2028 6-0061: Incorrect readback of firmware version. [ 1221.717071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1222.665958] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1222.679356] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1222.709829] xc2028 6-0061: Incorrect readback of firmware version. [ 1222.825069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1223.769835] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1223.783193] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1223.813828] xc2028 6-0061: Incorrect readback of firmware version. [ 1224.956268] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1225.897835] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1225.911204] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1225.941824] xc2028 6-0061: Incorrect readback of firmware version. [ 1226.061063] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1227.010962] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1227.024581] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1227.057828] xc2028 6-0061: Incorrect readback of firmware version. [ 1228.261067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1229.209836] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1229.223410] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1229.254828] xc2028 6-0061: Incorrect readback of firmware version. [ 1229.368093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1230.313830] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1230.327453] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1230.361825] xc2028 6-0061: Incorrect readback of firmware version. [ 1231.500096] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1232.462705] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1232.476233] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1232.509829] xc2028 6-0061: Incorrect readback of firmware version. [ 1232.624066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1233.569836] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1233.582983] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1233.613830] xc2028 6-0061: Incorrect readback of firmware version. [ 1234.816086] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1235.753831] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1235.767349] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1235.797830] xc2028 6-0061: Incorrect readback of firmware version. [ 1235.912070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1236.862836] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1236.876235] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1236.909827] xc2028 6-0061: Incorrect readback of firmware version. [ 1238.048090] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1238.997837] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1239.011236] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1239.041828] xc2028 6-0061: Incorrect readback of firmware version. [ 1239.156070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1240.113837] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1240.127360] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1240.157829] xc2028 6-0061: Incorrect readback of firmware version. [ 1241.364073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1242.334213] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1242.347737] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1242.381821] xc2028 6-0061: Incorrect readback of firmware version. [ 1242.496081] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1243.449958] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1243.463456] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1243.497956] xc2028 6-0061: Incorrect readback of firmware version. [ 1244.636074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1245.603105] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1245.616457] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1245.650826] xc2028 6-0061: Incorrect readback of firmware version. [ 1245.764073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1246.754838] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1246.768329] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1246.801830] xc2028 6-0061: Incorrect readback of firmware version. [ 1248.004067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1248.975840] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1248.989077] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1249.021831] xc2028 6-0061: Incorrect readback of firmware version. [ 1249.137074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1250.089715] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1250.103231] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1250.137851] xc2028 6-0061: Incorrect readback of firmware version. [ 1251.280095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1252.229805] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1252.243195] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1252.273826] xc2028 6-0061: Incorrect readback of firmware version. [ 1252.388068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1253.357840] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1253.371204] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1253.401862] xc2028 6-0061: Incorrect readback of firmware version. [ 1254.604067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1255.573698] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1255.595070] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1255.625831] xc2028 6-0061: Incorrect readback of firmware version. [ 1255.740094] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1256.689836] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1256.703334] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1256.734953] xc2028 6-0061: Incorrect readback of firmware version. [ 1257.876070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1258.821962] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1258.835486] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1258.869829] xc2028 6-0061: Incorrect readback of firmware version. [ 1258.984089] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1259.917957] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1259.931603] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1259.961850] xc2028 6-0061: Incorrect readback of firmware version. [ 1261.164097] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1262.109966] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1262.123453] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1262.157832] xc2028 6-0061: Incorrect readback of firmware version. [ 1262.273066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1263.217837] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1263.231459] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1263.265957] xc2028 6-0061: Incorrect readback of firmware version. [ 1264.404093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1265.353841] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1265.367205] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1265.397830] xc2028 6-0061: Incorrect readback of firmware version. [ 1265.512072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1266.473959] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1266.487483] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1266.521835] xc2028 6-0061: Incorrect readback of firmware version. [ 1267.724094] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1268.682840] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1268.696071] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1268.730822] xc2028 6-0061: Incorrect readback of firmware version. [ 1268.844067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1269.801960] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1269.815455] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1269.849830] xc2028 6-0061: Incorrect readback of firmware version. [ 1270.993125] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1271.933836] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1271.947350] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1271.977827] xc2028 6-0061: Incorrect readback of firmware version. [ 1272.092116] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1273.037961] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1273.051609] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1273.085835] xc2028 6-0061: Incorrect readback of firmware version. [ 1274.288072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1275.242839] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1275.256068] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1275.289834] xc2028 6-0061: Incorrect readback of firmware version. [ 1275.404030] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1276.353966] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1276.367330] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1276.397833] xc2028 6-0061: Incorrect readback of firmware version. [ 1277.536106] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1278.493718] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1278.507205] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1278.537836] xc2028 6-0061: Incorrect readback of firmware version. [ 1278.652093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1279.605959] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1279.619479] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1279.653831] xc2028 6-0061: Incorrect readback of firmware version. [ 1280.856095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1281.813831] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1281.827212] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1281.857831] xc2028 6-0061: Incorrect readback of firmware version. [ 1281.972067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1282.913835] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1282.927210] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1282.957835] xc2028 6-0061: Incorrect readback of firmware version. [ 1284.096083] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1285.041987] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1285.055587] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1285.089834] xc2028 6-0061: Incorrect readback of firmware version. [ 1285.204070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1286.149837] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1286.163364] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1286.193830] xc2028 6-0061: Incorrect readback of firmware version. [ 1287.396075] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1288.341842] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1288.355333] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1288.386822] xc2028 6-0061: Incorrect readback of firmware version. [ 1288.501069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1289.445840] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1289.459587] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1289.493836] xc2028 6-0061: Incorrect readback of firmware version. [ 1290.632071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1291.585962] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1291.599585] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1291.633834] xc2028 6-0061: Incorrect readback of firmware version. [ 1291.748061] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1292.705843] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1292.719116] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1292.749836] xc2028 6-0061: Incorrect readback of firmware version. [ 1293.952067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1294.897963] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1294.911605] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1294.945837] xc2028 6-0061: Incorrect readback of firmware version. [ 1295.060089] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1296.009838] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1296.023084] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1296.053838] xc2028 6-0061: Incorrect readback of firmware version. [ 1297.192082] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1298.133844] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1298.147369] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1298.177838] xc2028 6-0061: Incorrect readback of firmware version. [ 1298.292091] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1299.238986] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1299.252463] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1299.285837] xc2028 6-0061: Incorrect readback of firmware version. [ 1300.488096] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1301.437715] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1301.451215] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1301.481855] xc2028 6-0061: Incorrect readback of firmware version. [ 1301.596093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1302.557965] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1302.571481] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1302.605837] xc2028 6-0061: Incorrect readback of firmware version. [ 1303.745071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1304.697839] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1304.711233] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1304.742839] xc2028 6-0061: Incorrect readback of firmware version. [ 1304.856094] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1305.801963] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1305.815459] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1305.849833] xc2028 6-0061: Incorrect readback of firmware version. [ 1307.052071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1307.993841] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1308.007339] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1308.037838] xc2028 6-0061: Incorrect readback of firmware version. [ 1308.153066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1309.117722] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1309.131086] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1309.161838] xc2028 6-0061: Incorrect readback of firmware version. [ 1310.300071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1311.249972] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1311.263454] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1311.297834] xc2028 6-0061: Incorrect readback of firmware version. [ 1311.412063] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1312.361968] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1312.375461] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1312.409837] xc2028 6-0061: Incorrect readback of firmware version. [ 1313.613119] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1314.566720] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1314.579994] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1314.613838] xc2028 6-0061: Incorrect readback of firmware version. [ 1314.729082] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1315.669843] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1315.683084] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1315.713838] xc2028 6-0061: Incorrect readback of firmware version. [ 1316.856060] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1317.797966] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1317.811614] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1317.841836] xc2028 6-0061: Incorrect readback of firmware version. [ 1317.956070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1318.910702] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1318.923851] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1318.957821] xc2028 6-0061: Incorrect readback of firmware version. [ 1320.160071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1321.102722] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1321.116066] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1321.149839] xc2028 6-0061: Incorrect readback of firmware version. [ 1321.264072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1322.193846] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1322.207337] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1322.238836] xc2028 6-0061: Incorrect readback of firmware version. [ 1323.380066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1324.326848] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1324.340246] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1324.373837] xc2028 6-0061: Incorrect readback of firmware version. [ 1324.488074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1325.437974] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1325.451337] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1325.481841] xc2028 6-0061: Incorrect readback of firmware version. [ 1326.684073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1327.637971] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1327.651608] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1327.685841] xc2028 6-0061: Incorrect readback of firmware version. [ 1327.800116] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1328.725846] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1328.739087] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1328.769841] xc2028 6-0061: Incorrect readback of firmware version. [ 1329.909073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1330.862847] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1330.876246] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1330.909839] xc2028 6-0061: Incorrect readback of firmware version. [ 1331.024093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1331.961968] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1331.975461] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1332.009839] xc2028 6-0061: Incorrect readback of firmware version. [ 1333.208072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1334.161599] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1334.175087] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1334.205966] xc2028 6-0061: Incorrect readback of firmware version. [ 1334.320116] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1335.270870] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1335.284468] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1335.317837] xc2028 6-0061: Incorrect readback of firmware version. [ 1336.472064] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1337.417974] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1337.431463] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1337.465838] xc2028 6-0061: Incorrect readback of firmware version. [ 1337.580068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1338.542845] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1338.556718] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1338.589844] xc2028 6-0061: Incorrect readback of firmware version. [ 1339.792097] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1340.742722] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1340.756218] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1340.789842] xc2028 6-0061: Incorrect readback of firmware version. [ 1340.904090] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1341.845969] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1341.859486] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1341.893844] xc2028 6-0061: Incorrect readback of firmware version. [ 1343.032094] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1343.982848] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1343.996373] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1344.029968] xc2028 6-0061: Incorrect readback of firmware version. [ 1344.144072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1345.093846] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1345.107360] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1345.137845] xc2028 6-0061: Incorrect readback of firmware version. [ 1346.340093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1347.293709] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1347.306719] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1347.337843] xc2028 6-0061: Incorrect readback of firmware version. [ 1347.452070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1348.393721] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1348.407109] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1348.437975] xc2028 6-0061: Incorrect readback of firmware version. [ 1349.580096] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1350.533723] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1350.547216] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1350.577873] xc2028 6-0061: Incorrect readback of firmware version. [ 1350.692066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1351.637850] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1351.651466] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1351.694833] xc2028 6-0061: Incorrect readback of firmware version. [ 1352.896085] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1353.841721] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1353.855094] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1353.885970] xc2028 6-0061: Incorrect readback of firmware version. [ 1354.000067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1354.942851] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1354.956376] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1354.989844] xc2028 6-0061: Incorrect readback of firmware version. [ 1356.128070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1357.081722] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1357.095238] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1357.125844] xc2028 6-0061: Incorrect readback of firmware version. [ 1357.245070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1358.197716] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1358.211492] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1358.245841] xc2028 6-0061: Incorrect readback of firmware version. [ 1359.448072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1360.393852] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1360.407249] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1360.438837] xc2028 6-0061: Incorrect readback of firmware version. [ 1360.552086] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1361.501976] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1361.515467] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1361.549841] xc2028 6-0061: Incorrect readback of firmware version. [ 1362.692095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1363.637849] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1363.651217] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1363.681846] xc2028 6-0061: Incorrect readback of firmware version. [ 1363.796069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1364.741724] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1364.755222] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1364.785844] xc2028 6-0061: Incorrect readback of firmware version. [ 1365.988096] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1366.942839] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1366.955707] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1366.989831] xc2028 6-0061: Incorrect readback of firmware version. [ 1367.104094] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1368.049852] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1368.063342] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1368.093876] xc2028 6-0061: Incorrect readback of firmware version. [ 1369.248037] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1370.190853] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1370.204376] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1370.238837] xc2028 6-0061: Incorrect readback of firmware version. [ 1370.353150] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1371.293726] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1371.306711] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1371.337826] xc2028 6-0061: Incorrect readback of firmware version. [ 1372.540073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1373.478853] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1373.492252] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1373.525844] xc2028 6-0061: Incorrect readback of firmware version. [ 1373.640092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1374.597725] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1374.611121] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1374.641847] xc2028 6-0061: Incorrect readback of firmware version. [ 1375.788096] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1376.745849] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1376.759348] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1376.789845] xc2028 6-0061: Incorrect readback of firmware version. [ 1376.904063] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1377.841723] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1377.855116] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1377.885847] xc2028 6-0061: Incorrect readback of firmware version. [ 1379.088094] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1380.023098] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1380.036627] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1380.069847] xc2028 6-0061: Incorrect readback of firmware version. [ 1380.185112] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1381.133979] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1381.147349] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1381.177846] xc2028 6-0061: Incorrect readback of firmware version. [ 1382.316072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1383.261728] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1383.275123] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1383.305974] xc2028 6-0061: Incorrect readback of firmware version. [ 1383.420093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1384.365847] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1384.379474] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1384.418080] xc2028 6-0061: Incorrect readback of firmware version. [ 1385.620092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1386.569731] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1386.583218] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1386.617849] xc2028 6-0061: Incorrect readback of firmware version. [ 1386.732089] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1387.685856] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1387.699096] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1387.730845] xc2028 6-0061: Incorrect readback of firmware version. [ 1388.868069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1389.818854] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1389.832106] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1389.865847] xc2028 6-0061: Incorrect readback of firmware version. [ 1389.980069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1390.926852] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1390.940229] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1390.973848] xc2028 6-0061: Incorrect readback of firmware version. [ 1392.176122] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1393.121855] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1393.135254] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1393.165840] xc2028 6-0061: Incorrect readback of firmware version. [ 1393.280074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1394.221855] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1394.235366] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1394.265850] xc2028 6-0061: Incorrect readback of firmware version. [ 1395.404098] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1396.349852] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1396.363476] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1396.397845] xc2028 6-0061: Incorrect readback of firmware version. [ 1396.516095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1397.465728] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1397.479100] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1397.509848] xc2028 6-0061: Incorrect readback of firmware version. [ 1398.712095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1399.665727] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1399.679100] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1399.709850] xc2028 6-0061: Incorrect readback of firmware version. [ 1399.824092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1400.773727] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1400.787477] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1400.821976] xc2028 6-0061: Incorrect readback of firmware version. [ 1401.968072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1402.914729] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1402.928351] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1402.961851] xc2028 6-0061: Incorrect readback of firmware version. [ 1403.077112] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1404.009728] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1404.023478] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1404.057852] xc2028 6-0061: Incorrect readback of firmware version. [ 1405.260075] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1406.211106] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1406.224746] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1406.257846] xc2028 6-0061: Incorrect readback of firmware version. [ 1406.372095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1407.329733] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1407.343257] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1407.373850] xc2028 6-0061: Incorrect readback of firmware version. [ 1408.516121] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1409.461979] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1409.475498] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1409.509848] xc2028 6-0061: Incorrect readback of firmware version. [ 1409.624088] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1410.573730] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1410.587354] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1410.617849] xc2028 6-0061: Incorrect readback of firmware version. [ 1411.820070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1412.761982] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1412.775601] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1412.809851] xc2028 6-0061: Incorrect readback of firmware version. [ 1412.925067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1413.865856] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1413.879603] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1413.913850] xc2028 6-0061: Incorrect readback of firmware version. [ 1415.056084] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1416.005856] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1416.019599] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1416.053852] xc2028 6-0061: Incorrect readback of firmware version. [ 1416.168095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1417.113860] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1417.127100] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1417.157972] xc2028 6-0061: Incorrect readback of firmware version. [ 1418.360065] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1419.313860] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1419.327256] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1419.357847] xc2028 6-0061: Incorrect readback of firmware version. [ 1419.472073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1420.424847] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1420.440224] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1420.473851] xc2028 6-0061: Incorrect readback of firmware version. [ 1421.612093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1422.549717] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1422.562757] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1422.593854] xc2028 6-0061: Incorrect readback of firmware version. [ 1422.708069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1423.653984] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1423.667509] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1423.701851] xc2028 6-0061: Incorrect readback of firmware version. [ 1424.904092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1425.845981] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1425.859628] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1425.893854] xc2028 6-0061: Incorrect readback of firmware version. [ 1426.008093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1426.945860] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1426.959100] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1426.989978] xc2028 6-0061: Incorrect readback of firmware version. [ 1428.129069] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1429.069861] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1429.083225] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1429.113882] xc2028 6-0061: Incorrect readback of firmware version. [ 1429.228071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1430.173732] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1430.187498] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1430.217848] xc2028 6-0061: Incorrect readback of firmware version. [ 1431.421042] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1432.369859] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1432.383226] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1432.414842] xc2028 6-0061: Incorrect readback of firmware version. [ 1432.528074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1433.477861] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1433.491355] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1433.525884] xc2028 6-0061: Incorrect readback of firmware version. [ 1434.668068] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1435.614722] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1435.638252] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1435.670853] xc2028 6-0061: Incorrect readback of firmware version. [ 1435.785067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1436.741857] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1436.755357] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1436.785853] xc2028 6-0061: Incorrect readback of firmware version. [ 1437.988098] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1438.918861] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1438.932228] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1438.966854] xc2028 6-0061: Incorrect readback of firmware version. [ 1439.080063] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1440.025732] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1440.039119] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1440.069852] xc2028 6-0061: Incorrect readback of firmware version. [ 1441.208076] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1442.146861] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1442.160388] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1442.193856] xc2028 6-0061: Incorrect readback of firmware version. [ 1442.308071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1443.257863] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1443.271354] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1443.301856] xc2028 6-0061: Incorrect readback of firmware version. [ 1444.505078] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1445.457864] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1445.471479] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1445.505855] xc2028 6-0061: Incorrect readback of firmware version. [ 1445.621114] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1446.577864] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1446.592360] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1446.625855] xc2028 6-0061: Incorrect readback of firmware version. [ 1447.764074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1448.709738] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1448.722982] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1448.753858] xc2028 6-0061: Incorrect readback of firmware version. [ 1448.868070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1449.810739] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1449.824383] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1449.857856] xc2028 6-0061: Incorrect readback of firmware version. [ 1451.060093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1451.997738] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1452.011104] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1452.041856] xc2028 6-0061: Incorrect readback of firmware version. [ 1452.156067] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1453.105862] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1453.119262] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1453.149858] xc2028 6-0061: Incorrect readback of firmware version. [ 1454.296120] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1455.249734] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1455.263250] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1455.293859] xc2028 6-0061: Incorrect readback of firmware version. [ 1455.409066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1456.362732] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1456.376484] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1456.409853] xc2028 6-0061: Incorrect readback of firmware version. [ 1457.613070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1458.573734] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1458.587258] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1458.617860] xc2028 6-0061: Incorrect readback of firmware version. [ 1458.733065] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1459.673737] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1459.687359] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1459.717856] xc2028 6-0061: Incorrect readback of firmware version. [ 1460.860075] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1461.805867] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1461.819355] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1461.853853] xc2028 6-0061: Incorrect readback of firmware version. [ 1461.968091] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1462.921737] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1462.935361] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1462.965858] xc2028 6-0061: Incorrect readback of firmware version. [ 1464.168095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1465.113737] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1465.127264] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1465.157854] xc2028 6-0061: Incorrect readback of firmware version. [ 1465.276095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1466.222986] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1466.236228] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1466.269861] xc2028 6-0061: Incorrect readback of firmware version. [ 1467.408072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1468.357736] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1468.371383] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1468.402845] xc2028 6-0061: Incorrect readback of firmware version. [ 1468.516095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1469.462867] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1469.476392] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1469.509859] xc2028 6-0061: Incorrect readback of firmware version. [ 1470.712097] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1471.661985] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1471.675633] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1471.709856] xc2028 6-0061: Incorrect readback of firmware version. [ 1471.824071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1472.781735] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1472.795376] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1472.825858] xc2028 6-0061: Incorrect readback of firmware version. [ 1473.964092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1474.930857] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1474.944506] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1474.977862] xc2028 6-0061: Incorrect readback of firmware version. [ 1475.092072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1476.021737] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1476.035362] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1476.065856] xc2028 6-0061: Incorrect readback of firmware version. [ 1477.268071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1478.213739] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1478.227130] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1478.257859] xc2028 6-0061: Incorrect readback of firmware version. [ 1478.372095] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1479.321737] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1479.335378] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1479.365860] xc2028 6-0061: Incorrect readback of firmware version. [ 1480.505071] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1481.449867] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1481.463357] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1481.497856] xc2028 6-0061: Incorrect readback of firmware version. [ 1481.612066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1482.565863] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1482.579612] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1482.613861] xc2028 6-0061: Incorrect readback of firmware version. [ 1483.816190] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1484.769743] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1484.782983] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1484.813851] xc2028 6-0061: Incorrect readback of firmware version. [ 1484.928111] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1485.885743] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1485.899234] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1485.929857] xc2028 6-0061: Incorrect readback of firmware version. [ 1487.068093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1488.013869] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1488.027358] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1488.061855] xc2028 6-0061: Incorrect readback of firmware version. [ 1488.176102] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1489.122861] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1489.136255] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1489.169859] xc2028 6-0061: Incorrect readback of firmware version. [ 1490.372092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1491.318737] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1491.332642] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1491.365864] xc2028 6-0061: Incorrect readback of firmware version. [ 1491.489056] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1492.434769] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1492.449979] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1492.481862] xc2028 6-0061: Incorrect readback of firmware version. [ 1493.628066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1494.585870] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1494.599389] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1494.629862] xc2028 6-0061: Incorrect readback of firmware version. [ 1494.744092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1495.689868] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1495.703233] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1495.733853] xc2028 6-0061: Incorrect readback of firmware version. [ 1496.940117] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1497.886870] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1497.900394] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1497.933983] xc2028 6-0061: Incorrect readback of firmware version. [ 1498.048066] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1498.986024] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1498.999141] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1499.029863] xc2028 6-0061: Incorrect readback of firmware version. [ 1500.168093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1501.113871] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1501.127268] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1501.157862] xc2028 6-0061: Incorrect readback of firmware version. [ 1501.272074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1502.202870] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1502.218731] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1502.249864] xc2028 6-0061: Incorrect readback of firmware version. [ 1503.452073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1504.393739] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1504.407239] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1504.441861] xc2028 6-0061: Incorrect readback of firmware version. [ 1504.556073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1505.497746] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1505.511355] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1505.545864] xc2028 6-0061: Incorrect readback of firmware version. [ 1506.684065] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1507.617743] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1507.631365] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1507.661865] xc2028 6-0061: Incorrect readback of firmware version. [ 1507.776104] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1508.729735] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1508.742989] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1508.773862] xc2028 6-0061: Incorrect readback of firmware version. [ 1509.976102] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1510.937741] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1510.951265] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1510.981861] xc2028 6-0061: Incorrect readback of firmware version. [ 1511.096087] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1512.038868] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1512.052516] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1512.085863] xc2028 6-0061: Incorrect readback of firmware version. [ 1513.232074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1514.173874] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1514.187360] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1514.221862] xc2028 6-0061: Incorrect readback of firmware version. [ 1514.336077] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1515.297743] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1515.311263] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1515.341865] xc2028 6-0061: Incorrect readback of firmware version. [ 1516.544097] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1517.489994] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1517.503641] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1517.537861] xc2028 6-0061: Incorrect readback of firmware version. [ 1517.652063] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1518.617991] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1518.631641] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1518.665865] xc2028 6-0061: Incorrect readback of firmware version. [ 1519.809058] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1520.757873] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1520.771397] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1520.802866] xc2028 6-0061: Incorrect readback of firmware version. [ 1520.917064] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1521.861745] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1521.875492] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1521.909863] xc2028 6-0061: Incorrect readback of firmware version. [ 1523.112075] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1524.054748] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1524.068270] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1524.101868] xc2028 6-0061: Incorrect readback of firmware version. [ 1524.217074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1525.153744] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1525.167383] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1525.197866] xc2028 6-0061: Incorrect readback of firmware version. [ 1526.340109] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1527.293747] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1527.307239] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1527.337866] xc2028 6-0061: Incorrect readback of firmware version. [ 1527.452070] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1528.401870] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1528.416411] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1528.450863] xc2028 6-0061: Incorrect readback of firmware version. [ 1529.652075] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1530.590870] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1530.604368] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1530.637865] xc2028 6-0061: Incorrect readback of firmware version. [ 1530.752072] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1531.702872] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1531.716510] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1531.749866] xc2028 6-0061: Incorrect readback of firmware version. [ 1532.888074] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1533.829869] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1533.843138] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1533.873868] xc2028 6-0061: Incorrect readback of firmware version. [ 1533.988093] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1534.937750] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1534.951239] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1534.981863] xc2028 6-0061: Incorrect readback of firmware version. [ 1536.184092] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1537.130875] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1537.144525] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1537.177868] xc2028 6-0061: Incorrect readback of firmware version. [ 1537.292073] xc2028 6-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 1538.242744] xc2028 6-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 1538.256242] xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [ 1538.289867] xc2028 6-0061: Incorrect readback of firmware version.
Quoted 10 lines · On Thu, Aug 6, 2009 at 9:54 AM, <[email protected]> wrote:
Hi,
I want to inform you that thanks to Douglas Schilling Landgraf, the first point (automatic recognition of the device when plugged in) ha been resolved (using his development tree driver).
I've tried to scan for digital channels again and the result has not changed but in the dmesg attached there are a lot of messages created during the scan process. I hope they are useful to solve at list the issue related with the digital scanning.
Thank you,
Xwang
<snip>
Yeah, I've seen that before. Open up em28xx-dvb.c, and move the following:
case EM2880_BOARD_EMPIRE_DUAL_TV:
from line 402 to line 492. So it should look like this:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
dev->i2c_adap);
Then unplug the device, recompile, reinstall and see if the dvb starts working.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
A message that is not in the archive (sent off-list or not yet received): [email protected]
Ok,
I've made the change and now the digital tv works perfectly.
So now I should test the analog tv, but I fear to have another kernel panic.
Is there something I can do before testing so that to be sure that at least all the file system are in a safety condition even if a kernel panic happens. I'm wondering if it is the case, for example, to umount them and remount in read only mode so that if I have to turn off the pc, nothing can be corrupted (is it so?). What do you suggest?
In case, how can I temporarly umount and remout the file systems in read only mode? Should I use alt+sys+S followed by alt+sys+U? Can I use such commands while I'm in KDE? Thank you,
Xwang
Douglas Schilling Landgraf ha scritto:
Quoted 53 lines
Hello Xwang,
Could you please try the bellow suggestion?
If you want I can make this change in my development tree and you can test from there.Let me know the results
Cheers,
DouglasQuoted 35 lines · On Thu, 6 Aug 2009 10:17:28 -0400 Devin Heitmueller…
Quoted 11 lines · On Thu, Aug 6, 2009 at 9:54 AM, <[email protected]> wrote:
Hi,
I want to inform you that thanks to Douglas Schilling Landgraf, the first point (automatic recognition of the device when plugged in) ha been resolved (using his development tree driver). I've tried to scan for digital channels again and the result has not changed but in the dmesg attached there are a lot of messages created during the scan process. I hope they are useful to solve at list the issue related with the digital scanning.
Thank you,
Xwang<snip>
Yeah, I've seen that before. Open up
em28xx-dvb.c, and move the following:case
EM2880_BOARD_EMPIRE_DUAL_TV:from line 402 to line 492. So it should look like this:
case
EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
caseEM2880_BOARD_EMPIRE_DUAL_TV:dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,dev->i2c_adap);Then unplug the device, recompile, reinstall and see if the dvb starts working.
Devin
Quoted 7 lines · On Thu, Aug 6, 2009 at 11:16 AM, <[email protected]> wrote:
Ok,
I've made the change and now the digital tv works perfectly.
So now I should test the analog tv, but I fear to have another kernel panic. Is there something I can do before testing so that to be sure that at least all the file system are in a safety condition even if a kernel panic happens.
I'm wondering if it is the case, for example, to umount them and remount in
Quoted 8 lines
read only mode so that if I have to turn off the pc, nothing can be corrupted (is it so?).
What do you suggest?
In case, how can I temporarly umount and remout the file systems in read only mode? Should I use alt+sys+S followed by alt+sys+U? Can I use such commands while I'm in KDE?
Thank you,
Xwang
Glad to hear it's working now. I will add the patch and issue a PULL request to get it into the mainline (I had to do this already for several other boards).
Regarding your concerns on panic, as long as you have a modern filesystem like ext3, and you don't have alot of applications running which are doing writes, a panic is a pretty safe event. I panic my machine many times a week and never have any problems.
Cheers,
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Ok,
I've tried to tune analog tv with tvtime-scanner and all the channels have been tuned corretly. However, even if I use the following command to redirect the audio from the device to the audio card:
sox -r 48000 -t alsa hw:1,0 -t alsa default &
no audio is present when I start tv time and sox exits with the output as in the attached file. If it is possible to fix this, this device can be added to the fully supported ones. Xwang
Devin Heitmueller ha scritto:
Quoted 33 lines · On Thu, Aug 6, 2009 at 11:16 AM, <[email protected]> wrote:
Quoted 17 lines
Ok,
I've made the change and now the digital tv works perfectly.
So now I should test the analog tv, but I fear to have another kernel panic. Is there something I can do before testing so that to be sure that at least all the file system are in a safety condition even if a kernel panic happens.
I'm wondering if it is the case, for example, to umount them and remount in read only mode so that if I have to turn off the pc, nothing can be corrupted (is it so?).
What do you suggest?
In case, how can I temporarly umount and remout the file systems in read only mode? Should I use alt+sys+S followed by alt+sys+U? Can I use such commands while I'm in KDE?
Thank you,
XwangGlad to hear it's working now. I will add the patch and issue a PULL request to get it into the mainline (I had to do this already for several other boards).
Regarding your concerns on panic, as long as you have a modern filesystem like ext3, and you don't have alot of applications running which are doing writes, a panic is a pretty safe event. I panic my machine many times a week and never have any problems.
Cheers,
Devin
Just a little addendum.
I remember that the audio of analog tv has started to work with Markus' drivers when he added the em28xx-audioep driver because, if I have correctly understood, my device has a noy standard audio. Is it possible to import the necessary code in the main branch so that to have the device fully functional (today it is unusable to see analog tv because no audio is present). Thank you to all,
Xwang
[email protected] ha scritto:
Quoted 45 lines
Ok,
I've tried to tune analog tv with tvtime-scanner and all the channels have been tuned corretly. However, even if I use the following command to redirect the audio from the device to the audio card:
sox -r 48000 -t alsa hw:1,0 -t alsa default &
no audio is present when I start tv time and sox exits with the output as in the attached file. If it is possible to fix this, this device can be added to the fully supported ones. XwangDevin Heitmueller ha scritto:
Quoted 23 lines · On Thu, Aug 6, 2009 at 11:16 AM, <[email protected]> wrote:
Quoted 17 lines
Ok,
I've made the change and now the digital tv works perfectly.
So now I should test the analog tv, but I fear to have another kernel panic. Is there something I can do before testing so that to be sure that at least all the file system are in a safety condition even if a kernel panic happens.
I'm wondering if it is the case, for example, to umount them and remount in read only mode so that if I have to turn off the pc, nothing can be corrupted (is it so?).
What do you suggest?
In case, how can I temporarly umount and remout the file systems in read only mode? Should I use alt+sys+S followed by alt+sys+U? Can I use such commands while I'm in KDE?
Thank you,
XwangGlad to hear it's working now. I will add the patch and issue a PULL request to get it into the mainline (I had to do this already for several other boards).
Quoted 10 lines
Regarding your concerns on panic, as long as you have a modern filesystem like ext3, and you don't have alot of applications running which are doing writes, a panic is a pretty safe event. I panic my machine many times a week and never have any problems.
Cheers,
Devin
------------------------------------------------------------------------
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 9 lines · On Fri, Aug 7, 2009 at 6:24 AM, <[email protected]> wrote:
Just a little addendum.
I remember that the audio of analog tv has started to work with Markus' drivers when he added the em28xx-audioep driver because, if I have correctly understood, my device has a noy standard audio.
Is it possible to import the necessary code in the main branch so that to have the device fully functional (today it is unusable to see analog tv because no audio is present).
Thank you to all,
Xwang
The dmesg output suggests your device has an EMP202 on the em28xx ac97 port, which is pretty standard and should be supported by the em28xx current audio driver. I would have to look closer to better understand why your audio is not working.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
You are right.
I've opened the device and with the help of a magnifier I've seen that it has an EMP202 (at first I've read EMP702 but I've seen that such chip does not exist so probably it is an EMP202). Xwang
Devin Heitmueller ha scritto:
Quoted 21 lines · On Fri, Aug 7, 2009 at 6:24 AM, <[email protected]> wrote:
Quoted 11 lines
Just a little addendum.
I remember that the audio of analog tv has started to work with Markus' drivers when he added the em28xx-audioep driver because, if I have correctly understood, my device has a noy standard audio.
Is it possible to import the necessary code in the main branch so that to have the device fully functional (today it is unusable to see analog tv because no audio is present).
Thank you to all,
XwangThe dmesg output suggests your device has an EMP202 on the em28xx ac97 port, which is pretty standard and should be supported by the em28xx current audio driver. I would have to look closer to better understand why your audio is not working.
Devin
Hi to all!
I don't know why, but today my device has changed its EEPROM hash to the following value 0x396a0441 as you can see from the attached dmesg.
So it is not recognized anymore.
Is there something that can cause such a change?
I suspect it is not the first time that the eprom hash of this device change.
Can you help me?
Xwang
PS Meantime I will change the hash and test if the device work again.
[email protected] ha scritto:
Quoted 37 lines
Ok,
I've tried to tune analog tv with tvtime-scanner and all the channels have been tuned corretly. However, even if I use the following command to redirect the audio from the device to the audio card:
sox -r 48000 -t alsa hw:1,0 -t alsa default &
no audio is present when I start tv time and sox exits with the output as in the attached file. If it is possible to fix this, this device can be added to the fully supported ones. XwangDevin Heitmueller ha scritto:
Quoted 28 lines · On Thu, Aug 6, 2009 at 11:16 AM, <[email protected]> wrote:
Quoted 17 lines
Ok,
I've made the change and now the digital tv works perfectly.
So now I should test the analog tv, but I fear to have another kernel panic. Is there something I can do before testing so that to be sure that at least all the file system are in a safety condition even if a kernel panic happens.
I'm wondering if it is the case, for example, to umount them and remount in read only mode so that if I have to turn off the pc, nothing can be corrupted (is it so?).
What do you suggest?
In case, how can I temporarly umount and remout the file systems in read only mode? Should I use alt+sys+S followed by alt+sys+U? Can I use such commands while I'm in KDE?
Thank you,
XwangGlad to hear it's working now. I will add the patch and issue a PULL request to get it into the mainline (I had to do this already for several other boards).
Regarding your concerns on panic, as long as you have a modern filesystem like ext3, and you don't have alot of applications running which are doing writes, a panic is a pretty safe event. I panic my machine many times a week and never have any problems.
Quoted 8 lines
Quoted 5 lines
Cheers,
Devin
------------------------------------------------------------------------
[ 2150.880753] em28xx: New device USB 2881 Device @ 480 Mbps (eb1a:e310, interface 0, class 0) [ 2150.880763] em28xx #0: Identified as MSI DigiVox A/D (card=49) [ 2150.880937] em28xx #0: chip ID is em2882/em2883 [ 2151.043937] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 10 e3 d0 12 5c 03 6a 22 00 00 [ 2151.043945] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 00 00 00 00 00 00 00 00 00 00 [ 2151.043952] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00 [ 2151.043958] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 [ 2151.043965] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2151.043972] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2151.043978] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [ 2151.043985] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 44 00 [ 2151.043991] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [ 2151.043998] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2151.044014] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2151.044020] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2151.044027] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2151.044034] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2151.044040] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2151.044048] em28xx #0: i2c eeprom f0: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2151.044057] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x396a0441 [ 2151.044059] em28xx #0: EEPROM info: [ 2151.044060] em28xx #0: AC97 audio (5 sample rates) [ 2151.044062] em28xx #0: 500mA max power [ 2151.044063] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000 [ 2151.050209] em28xx #0: found i2c device @ 0x1e [???] [ 2151.074553] em28xx #0: found i2c device @ 0xa0 [eeprom] [ 2151.079193] em28xx #0: found i2c device @ 0xb8 [tvp5150a] [ 2151.081085] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] [ 2151.092318] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 2151.092322] em28xx #0: You may try to use card=<n> insmod option to workaround that. [ 2151.092324] em28xx #0: Please send an email with this log to: [ 2151.092326] em28xx #0: V4L Mailing List <[email protected]> [ 2151.092328] em28xx #0: Board eeprom hash is 0x396a0441 [ 2151.092330] em28xx #0: Board i2c devicelist hash is 0x944d008f [ 2151.092332] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: [ 2151.092335] em28xx #0: card=0 -> Unknown EM2800 video grabber [ 2151.092337] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber [ 2151.092339] em28xx #0: card=2 -> Terratec Cinergy 250 USB [ 2151.092341] em28xx #0: card=3 -> Pinnacle PCTV USB 2 [ 2151.092343] em28xx #0: card=4 -> Hauppauge WinTV USB 2 [ 2151.092345] em28xx #0: card=5 -> MSI VOX USB 2.0 [ 2151.092347] em28xx #0: card=6 -> Terratec Cinergy 200 USB [ 2151.092349] em28xx #0: card=7 -> Leadtek Winfast USB II [ 2151.092352] em28xx #0: card=8 -> Kworld USB2800 [ 2151.092354] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker [ 2151.092356] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 [ 2151.092358] em28xx #0: card=11 -> Terratec Hybrid XS [ 2151.092360] em28xx #0: card=12 -> Kworld PVR TV 2800 RF [ 2151.092362] em28xx #0: card=13 -> Terratec Prodigy XS [ 2151.092365] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 [ 2151.092367] em28xx #0: card=15 -> V-Gear PocketTV [ 2151.092369] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 [ 2151.092371] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick [ 2151.092374] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) [ 2151.092376] em28xx #0: card=19 -> EM2860/SAA711X Reference Design [ 2151.092378] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 [ 2151.092380] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder [ 2151.092382] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber [ 2151.092385] em28xx #0: card=23 -> Huaqi DLCW-130 [ 2151.092387] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner [ 2151.092389] em28xx #0: card=25 -> Gadmei UTV310 [ 2151.092391] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 [ 2151.092393] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) [ 2151.092395] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe [ 2151.092397] em28xx #0: card=29 -> <NULL> [ 2151.092399] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 [ 2151.092401] em28xx #0: card=31 -> Usbgear VD204v9 [ 2151.092403] em28xx #0: card=32 -> Supercomp USB 2.0 TV [ 2151.092405] em28xx #0: card=33 -> <NULL> [ 2151.092407] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS [ 2151.092409] em28xx #0: card=35 -> Typhoon DVD Maker [ 2151.092411] em28xx #0: card=36 -> NetGMBH Cam [ 2151.092413] em28xx #0: card=37 -> Gadmei UTV330 [ 2151.092415] em28xx #0: card=38 -> Yakumo MovieMixer [ 2151.092417] em28xx #0: card=39 -> KWorld PVRTV 300U [ 2151.092419] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U [ 2151.092421] em28xx #0: card=41 -> Kworld 350 U DVB-T [ 2151.092423] em28xx #0: card=42 -> Kworld 355 U DVB-T [ 2151.092425] em28xx #0: card=43 -> Terratec Cinergy T XS [ 2151.092427] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) [ 2151.092430] em28xx #0: card=45 -> Pinnacle PCTV DVB-T [ 2151.092432] em28xx #0: card=46 -> Compro, VideoMate U3 [ 2151.092434] em28xx #0: card=47 -> KWorld DVB-T 305U [ 2151.092436] em28xx #0: card=48 -> KWorld DVB-T 310U [ 2151.092437] em28xx #0: card=49 -> MSI DigiVox A/D [ 2151.092439] em28xx #0: card=50 -> MSI DigiVox A/D II [ 2151.092441] em28xx #0: card=51 -> Terratec Hybrid XS Secam [ 2151.092443] em28xx #0: card=52 -> DNT DA2 Hybrid [ 2151.092446] em28xx #0: card=53 -> Pinnacle Hybrid Pro [ 2151.092448] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR [ 2151.092450] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) [ 2151.092452] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) [ 2151.092454] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 [ 2151.092456] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo [ 2151.092458] em28xx #0: card=59 -> <NULL> [ 2151.092460] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 [ 2151.092462] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 [ 2151.092464] em28xx #0: card=62 -> Gadmei TVR200 [ 2151.092466] em28xx #0: card=63 -> Kaiomy TVnPC U2 [ 2151.092468] em28xx #0: card=64 -> Easy Cap Capture DC-60 [ 2151.092470] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ [ 2151.092472] em28xx #0: card=66 -> Empire dual TV [ 2151.092474] em28xx #0: card=67 -> Terratec Grabby [ 2151.092476] em28xx #0: card=68 -> Terratec AV350 [ 2151.092478] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box [ 2151.092480] em28xx #0: card=70 -> Evga inDtube [ 2151.092482] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix [ 2151.168064] em28xx #0: [ 2151.168066] [ 2151.168070] em28xx #0: The support for this board weren't valid yet. [ 2151.168074] em28xx #0: Please send a report of having this working [ 2151.168077] em28xx #0: not to V4L mailing list (and/or to other addresses) [ 2151.168079] [ 2151.174043] tvp5150 6-005c: chip found @ 0xb8 (em28xx #0) [ 2151.182262] tuner 6-0061: chip found @ 0xc2 (em28xx #0) [ 2151.182441] xc2028 6-0061: creating new instance [ 2151.182445] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner [ 2151.182457] usb 2-3: firmware: requesting xc3028-v27.fw [ 2151.193573] xc2028 6-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 2151.252123] xc2028 6-0061: Loading firmware for type=BASE (1), id 0000000000000000. [ 2152.198958] xc2028 6-0061: Loading firmware for type=(0), id 000000000000b700. [ 2152.213606] SCODE (20000000), id 000000000000b700: [ 2152.213615] xc2028 6-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [ 2152.396208] em28xx #0: Config register raw data: 0xd0 [ 2152.396944] em28xx #0: AC97 vendor ID = 0xffffffff [ 2152.397434] em28xx #0: AC97 features = 0x6a90 [ 2152.397438] em28xx #0: Empia 202 AC97 audio processor detected [ 2152.520819] tvp5150 6-005c: tvp5150am1 detected. [ 2152.621320] em28xx #0: v4l2 driver version 0.1.2 [ 2152.707099] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 [ 2152.707106] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 2152.707110] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 2152.741984] em28xx video device (eb1a:e310): interface 1, class 255 found. [ 2152.741991] em28xx This is an anciliary interface not used by the driver [ 2152.817542] tvp5150 6-005c: tvp5150am1 detected.
Quoted 11 lines · On Tue, Aug 11, 2009 at 4:24 PM, <[email protected]> wrote:
Hi to all!
I don't know why, but today my device has changed its EEPROM hash to the following value0x396a0441
as you can see from the attached dmesg.
So it is not recognized anymore.
Is there something that can cause such a change?
I suspect it is not the first time that the eprom hash of this device change.
Can you help me?
Xwang
Quoted 1 line
PS Meantime I will change the hash and test if the device work again.
Comparing the two eeprom dumps (the one from your previous email versus the one you just sent), it would appear that something resulted in the value 0xFF written to offset 0xF0. What were you doing immediately prior to the failure? I'm not sure how we could have gotten into this state.
Douglas, in a few minutes I am leaving town for the next five days. Can you help Xwang out to restore his eeprom content using your tool?
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Ok!
I've restored the eprom and now it is recognised again.
The only not working part is analog tv audio which doesn't work even if I use the sox command. Thank you,
Xwang
Devin Heitmueller ha scritto:
Quoted 28 lines · On Tue, Aug 11, 2009 at 4:24 PM, <[email protected]> wrote:
Quoted 12 lines
Hi to all!
I don't know why, but today my device has changed its EEPROM hash to the following value0x396a0441
as you can see from the attached dmesg.
So it is not recognized anymore.
Is there something that can cause such a change?
I suspect it is not the first time that the eprom hash of this device change.
Can you help me?
XwangQuoted 2 lines
PS Meantime I will change the hash and test if the device work again.
Comparing the two eeprom dumps (the one from your previous email versus the one you just sent), it would appear that something resulted in the value
0xFFwritten to offset0xF0. What were you doing immediately prior to the failure? I'm not sure how we could have gotten into this state.Douglas, in a few minutes I am leaving town for the next five days. Can you help Xwang out to restore his eeprom content using your tool?
Devin
Hello Xwang,
Quoted 2 lines · On Tue, 11 Aug 2009 23:46:43 +0200 [email protected] wrote:
Ok!
I've restored the eprom and now it is recognised again.
Just to confirm, did you the rewrite_eeprom tool?
Quoted 2 lines
The only not working part is analog tv audio which doesn't work even if I use the sox command.
Ok.
Quoted 4 lines
Quoted 4 lines
Douglas, in a few minutes I am leaving town for the next five days. Can you help Xwang out to restore his eeprom content using your tool?
Sure Devin.
Cheers,
Douglas
I've used the rewrite_eeprom_v_1_4 which you send me 5 month ago when the eprom got corrupted for the first time. Xwang
Douglas Schilling Landgraf ha scritto:
Quoted 35 lines
Hello Xwang,
Quoted 3 lines · On Tue, 11 Aug 2009 23:46:43 +0200 [email protected] wrote:
Ok!
I've restored the eprom and now it is recognised again.Just to confirm, did you the
rewrite_eepromtool?Quoted 3 lines
The only not working part is analog tv audio which doesn't work even if I use the sox command.
Ok.
Quoted 4 lines
Quoted 4 lines
Douglas, in a few minutes I am leaving town for the next five days. Can you help Xwang out to restore his eeprom content using your tool?
Sure Devin.
Cheers,
Douglas
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Xwang,
Quoted 2 lines · On Wed, 12 Aug 2009 00:51:13 +0200 [email protected] wrote:
I've used the
rewrite_eeprom_v_1_4which you send me 5 month ago when the eprom got corrupted for the first time.
Great, now it's available at v4l-dvb tree.
Anyway, now we need to check the audio issue.
Thanks!
Douglas
Quoted 38 lines
Xwang
Douglas Schilling Landgraf ha scritto:
Quoted 35 lines
Hello Xwang,
Quoted 3 lines · On Tue, 11 Aug 2009 23:46:43 +0200 [email protected] wrote:
Ok!
I've restored the eprom and now it is recognised again.Just to confirm, did you the
rewrite_eepromtool?Quoted 3 lines
The only not working part is analog tv audio which doesn't work even if I use the sox command.
Ok.
Quoted 4 lines
Quoted 4 lines
Douglas, in a few minutes I am leaving town for the next five days. Can you help Xwang out to restore his eeprom content using your tool?
Sure Devin.
Cheers,
Douglas
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
When you want we can check the audio issue.
Consider that actually I've installed the latest main v4l-dvb (to test if all the patches have been ported to themain tree) and it's ok. However I have no problem to install your tree driver again to test whatever is needed to have a fully functional device. Xwang
PS the device has also a s-video (9 pin) input. In case I can test it, but I prefer to do that after the analog audio isssue has been solved
Douglas Schilling Landgraf ha scritto:
Quoted 67 lines
Hello Xwang,
Quoted 2 lines · On Wed, 12 Aug 2009 00:51:13 +0200 [email protected] wrote:
I've used the
rewrite_eeprom_v_1_4which you send me 5 month ago when the eprom got corrupted for the first time.Great, now it's available at v4l-dvb tree.
Anyway, now we need to check the audio issue.
Thanks!
DouglasQuoted 43 lines
Xwang
Douglas Schilling Landgraf ha scritto:
Quoted 39 lines
Hello Xwang,
Quoted 4 lines · On Tue, 11 Aug 2009 23:46:43 +0200 [email protected] wrote:
Ok!
I've restored the eprom and now it is recognised again.Just to confirm, did you the
rewrite_eepromtool?Quoted 4 lines
The only not working part is analog tv audio which doesn't work even if I use the sox command.
Ok.
Quoted 5 lines
Quoted 5 lines
Douglas, in a few minutes I am leaving town for the next five days. Can you help Xwang out to restore his eeprom content using your tool?
Sure Devin.
Cheers,
Douglas
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
No analog audio for the Empire Dual Pen: request for help and suggestions!!!
I would like to solve this analog audio issue (this device would be useful in the future thanks to the 9 pin s-video input which, I think can take the output of an external dvb-t decoder so that to be able to see cripted digital tv or from consoles to play and use notebook display as a tv). Following the (little) expertise gained with the Dikom DK300, I think that the default_analog gpio is not correct for the device.
Can I try with others gpio or a wrong gpio can phisically break the device?
Otherwise how can I create a correct gpio for this device?
Thank you,
Andrea (Xwang was my nickname)
[email protected] ha scritto:
Quoted 68 lines
When you want we can check the audio issue.
Consider that actually I've installed the latest main v4l-dvb (to test if all the patches have been ported to themain tree) and it's ok. However I have no problem to install your tree driver again to test whatever is needed to have a fully functional device. XwangPS the device has also a s-video (9 pin) input. In case I can test it, but I prefer to do that after the analog audio isssue has been solved
Douglas Schilling Landgraf ha scritto:
Quoted 60 lines
Hello Xwang,
Quoted 2 lines · On Wed, 12 Aug 2009 00:51:13 +0200 [email protected] wrote:
I've used the
rewrite_eeprom_v_1_4which you send me 5 month ago when the eprom got corrupted for the first time.Great, now it's available at v4l-dvb tree.
Anyway, now we need to check the audio issue.
Thanks!
DouglasQuoted 36 lines
Xwang
Douglas Schilling Landgraf ha scritto:
Quoted 32 lines
Hello Xwang,
Quoted 3 lines · On Tue, 11 Aug 2009 23:46:43 +0200 [email protected] wrote:
Ok!
I've restored the eprom and now it is recognised again.Just to confirm, did you the
rewrite_eepromtool?Quoted 3 lines
The only not working part is analog tv audio which doesn't work even if I use the sox command.
Ok.
Quoted 4 lines
Quoted 4 lines
Douglas, in a few minutes I am leaving town for the next five days. Can you help Xwang out to restore his eeprom content using your tool?
Sure Devin.
Cheers,
DouglasSignature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.htmlSignature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: No analog audio for the Empire Dual Pen: request for help and suggestions!!!
Quoted 10 lines · On Sun, Nov 15, 2009 at 8:12 AM, [email protected]…
I would like to solve this analog audio issue (this device would be useful in the future thanks to the 9 pin s-video input which, I think can take the output of an external dvb-t decoder so that to be able to see cripted digital tv or from consoles to play and use notebook display as a tv). Following the (little) expertise gained with the Dikom DK300, I think that the
default_analoggpio is not correct for the device.
Can I try with others gpio or a wrong gpio can phisically break the device? Otherwise how can I create a correct gpio for this device?
Thank you,
Andrea (Xwang was my nickname)
Hello Andrea,
To determine the correct analog_gpio, I typically do an analog capture under Windows, and use sniffusb to determine how the GPIO register is set at the time the analog video is being streamed.
http://www.pcausa.com/Utilities/UsbSnoop/
Generally speaking, you probably do not want to experiment toggling the GPIOs individually, since you can have conditions such as the digital demod running at the same time as the analog subsystem (which would draw too much power).
It's worth noting also that it is entirely possible that a LEDs are attached to GPIO pins as well (in regards to your other question about the LED behavior).
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Using two different usb devices (at least not at the same time).
In reply to [email protected]Hi to all!
As you probably know from my previous mails, I own two usb hybrid devices:
1) Empire Dual Pen
2) Dikom DK-300
There are still some problems with them (which I hope I can help solving with my testing) and I would like to know if I can use one of them and then the other without the need of module removal or if it is better to manually rmmod the em28xx modules after the removal of the first device and before the insertion of the second one. Thank you,
Xwang
New device: Dikom DK-300 (maybe Kworld 323U rebranded)
In reply to [email protected]Hi,
my brother has brought a Dikom DK-300 usb hybrid tv receiver.
He will use it under windows, but I've tried it with the latest v4l-dvb driver and I've discovered that it works well as analog tv (video and audio work using the sox command to send audio from /dev/dsp1 to /dev/dsp). The digital tv doesn't work (in kaffeine the digital tv icon is not present).
I post the dmesg obtained connecting the device.
If you want I can test for the next 10 days.
Thank you,
Xwang
[51167.096148] usb 2-3: new high speed USB device using ehci_hcd and address 6 [51167.231698] usb 2-3: configuration #1 chosen from 1 choice [51167.231862] em28xx: New device USB 2883 Device @ 480 Mbps (eb1a:e323, interface 0, class 0) [51167.231871] em28xx #0: Identified as Kworld VS-DVB-T 323UR (card=54) [51167.232984] em28xx #0: chip ID is em2882/em2883 [51167.364546] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 23 e3 d0 12 5c 00 6a 22 00 00 [51167.364553] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 01 00 00 00 00 00 00 00 00 00 [51167.364560] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00 [51167.364566] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 [51167.364573] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51167.364579] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51167.364585] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [51167.364591] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 33 00 20 00 44 00 [51167.364597] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [51167.364603] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51167.364610] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51167.364616] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51167.364622] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51167.364628] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51167.364634] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51167.364640] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [51167.364647] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x4e913442 [51167.364649] em28xx #0: EEPROM info: [51167.364650] em28xx #0: AC97 audio (5 sample rates) [51167.364651] em28xx #0: 500mA max power [51167.364652] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000 [51167.364654] em28xx #0: [51167.364654] [51167.364656] em28xx #0: The support for this board weren't valid yet. [51167.364658] em28xx #0: Please send a report of having this working [51167.364659] em28xx #0: not to V4L mailing list (and/or to other addresses) [51167.364659] [51167.367451] tvp5150 6-005c: chip found @ 0xb8 (em28xx #0) [51167.371212] tuner 6-0061: chip found @ 0xc2 (em28xx #0) [51167.371280] xc2028 6-0061: creating new instance [51167.371282] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner [51167.371287] usb 2-3: firmware: requesting xc3028-v27.fw [51167.374856] xc2028 6-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [51167.420061] xc2028 6-0061: Loading firmware for type=BASE (1), id 0000000000000000. [51168.329819] xc2028 6-0061: Loading firmware for type=(0), id 000000000000b700. [51168.352574] SCODE (20000000), id 000000000000b700: [51168.352584] xc2028 6-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [51168.541315] em28xx #0: Config register raw data: 0xd0 [51168.542051] em28xx #0: AC97 vendor ID = 0xffffffff [51168.542433] em28xx #0: AC97 features = 0x6a90 [51168.542438] em28xx #0: Empia 202 AC97 audio processor detected [51168.641549] tvp5150 6-005c: tvp5150am1 detected. [51168.740935] em28xx #0: v4l2 driver version 0.1.2 [51168.895090] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 [51168.895097] em28xx-audio.c: probing for em28x1 non standard usbaudio [51168.895101] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [51169.112537] tvp5150 6-005c: tvp5150am1 detected.
Re: New device: Dikom DK-300 (maybe Kworld 323U rebranded)
Quoted 12 lines · On Mon, Aug 10, 2009 at 6:27 PM, <[email protected]> wrote:
Hi,
my brother has brought a Dikom DK-300 usb hybrid tv receiver. He will use it under windows, but I've tried it with the latest v4l-dvb driver and I've discovered that it works well as analog tv (video and audio work using the sox command to send audio from/dev/dsp1to/dev/dsp). The digital tv doesn't work (in kaffeine the digital tv icon is not present).
I post the dmesg obtained connecting the device.
If you want I can test for the next 10 days.
Thank you,
Xwang
<snip>
Hello Xwang,
In order to add support for the digital side of the device, we would need to know which demodulator chip is in the device (which you could get by opening it up).
Alternatively, if you can get a SniffUSB 2.0 capture under Windows, from the time the device is plugged in, until after the device is tuned to a digital station, we can probably extrapolate which demod it has. We're going to need the Windows USB trace anyway in order to identify what the proper GPIO configuration is.
Personally, I'm not confident I will be able to debug this issue within the next ten days (I'm about to leave town for the next six days and I'm already swamped with other work), although some other developer may be willing to step in and lend a hand.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com