Skip to contentSkip to conversation

Pull request - net

U-Boot Ben Warren 2 participants 4 messages Aug 10, 2009 – Aug 11, 2009

lore
Share & tools
lore

Ben Warren

author
#0 lore raw

Wolfgang,

The following changes since commit eb1a4d0a471505c169bef19a73a60f8641f0b875:
Wolfgang Denk (1):

        Prepare 2009.08-rc2

are available in the git repository at:

git://git.denx.de/u-boot-net.git master

Po-Yu Chuang (1):
arm: A320: driver for FTMAC100 ethernet controller

Prafulla Wadaskar (2):
net: phy: bugfixes: mv88E61xx compiler warnings fixed
net: kirkwood: updates: used eth_setenv_enetaddr api

Roy Zang (1):
Fix E1000 build warning on AP1000 board

Sandeep Paulraj (1):
ARM: Davinci DM355: Enabling DM9000 on DM355 EVM

 board/davinci/dm355evm/dm355evm.c |   10 ++-
 drivers/net/Makefile              |    1 +
 drivers/net/e1000.c               |   88 ++++++------
 drivers/net/ftmac100.c            |  278 +++++++++++++++++++++++++++++++++++++
 drivers/net/ftmac100.h            |  154 ++++++++++++++++++++
 drivers/net/kirkwood_egiga.c      |   15 ++-
 drivers/net/phy/mv88e61xx.c       |   23 ++--
 include/netdev.h                  |    1 +
 8 files changed, 510 insertions(+), 60 deletions(-)
 create mode 100644 drivers/net/ftmac100.c
 create mode 100644 drivers/net/ftmac100.h

regards,
Ben

#1 lore raw

Dear Ben Warren,

Quoted 17 lines · In message <[email protected]> you wrote:

Wolfgang,

The following changes since commit eb1a4d0a471505c169bef19a73a60f8641f0b875:
Wolfgang Denk (1):

        Prepare 2009.08-rc2

are available in the git repository at:

git://git.denx.de/u-boot-net.git master

Po-Yu Chuang (1):
arm: A320: driver for FTMAC100 ethernet controller

Prafulla Wadaskar (2):
net: phy: bugfixes: mv88E61xx compiler warnings fixed
net: kirkwood: updates: used eth_setenv_enetaddr api

Quoted 5 lines

Roy Zang (1):
Fix E1000 build warning on AP1000 board

Sandeep Paulraj (1):
ARM: Davinci DM355: Enabling DM9000 on DM355 EVM

Hmm...

Seems the repo also included:

07/01 Richard Retanubun [U-Boot] [PATCH] UEC FIXED PHY: Determine
fixed-phy port using UEC interface name.
07/01 Richard Retanubun [U-Boot] [PATCH] Assigned a static SMI
address to all UECs TBIPA address.

OK, pulled. Thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
For those who like this sort of thing, this is the sort of thing they
like.                                               - Abraham Lincoln
author
#2 lore raw
Quoted 38 lines · Wolfgang Denk

Dear Ben Warren,

Quoted 17 lines · In message <[email protected]> you wrote:

Wolfgang,

The following changes since commit eb1a4d0a471505c169bef19a73a60f8641f0b875:
Wolfgang Denk (1):

        Prepare 2009.08-rc2

are available in the git repository at:

git://git.denx.de/u-boot-net.git master

Po-Yu Chuang (1):
arm: A320: driver for FTMAC100 ethernet controller

Prafulla Wadaskar (2):
net: phy: bugfixes: mv88E61xx compiler warnings fixed
net: kirkwood: updates: used eth_setenv_enetaddr api

Quoted 6 lines

Roy Zang (1):
Fix E1000 build warning on AP1000 board

Sandeep Paulraj (1):
ARM: Davinci DM355: Enabling DM9000 on DM355 EVM

Hmm...

Seems the repo also included:

07/01 Richard Retanubun [U-Boot] [PATCH] UEC FIXED PHY: Determine
fixed-phy port using UEC interface name.
07/01 Richard Retanubun [U-Boot] [PATCH] Assigned a static SMI
address to all UECs TBIPA address.

Quoted 7 lines

OK, pulled. Thanks.

Best regards,

Wolfgang Denk

Sorry, I pushed those two after the pull request and forgot to send another one.

regards,
Ben

#3 lore raw

Dear Ben Warren,

Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 7 lines

Seems the repo also included:

07/01 Richard Retanubun [U-Boot] [PATCH] UEC FIXED PHY: Determine
fixed-phy port using UEC interface name.
07/01 Richard Retanubun [U-Boot] [PATCH] Assigned a static SMI
address to all UECs TBIPA address.

...

Quoted 2 lines

Sorry, I pushed those two after the pull request and forgot to send another one.

No problem.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is easier to change the specification to fit the program than vice
versa.