CFI Flash write speed
Hello,
I have add CFI support to my project. I use Intel strata flash P30 and PXA270 CPU. The flash is connected with 16bit to the PXA data bus. If I write to the flash I have transfer rates of roughly 75kB/sec. I think this is very slow. How can I increase the transfer rate?
Thanks,
Andreas
Dear "A. Geisreiter",
Quoted 5 lines · In message <000001ca1a94$e0216f50$a0644df0$@de> you wrote:
I have add CFI support to my project. I use Intel strata flash P30 and PXA270 CPU. The flash is connected with 16bit to the PXA data bus. If I write to the flash I have transfer rates of roughly 75kB/sec. I think this is very slow. How can I increase the transfer rate?
Did you enable CONFIG_SYS_FLASH_USE_BUFFER_WRITE ?
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It is much easier to suggest solutions when you know nothing
A message that is not in the archive (sent off-list or not yet received): 004e01ca1bd8$a943a8f0$fbcafad0$@de
Dear "A. Geisreiter",
please always keep the mailing list on Cc:. Thanks.
Quoted 3 lines · In message <004e01ca1bd8$a943a8f0$fbcafad0$@de> you wrote:
I use U-Boot version 1.3.4 and there I can't find the define
CONFIG_SYS_FLASH_USE_BUFFER_WRITE. Do I need a patch or a newer version of U-Boot?
Well, using recent code is always recommended :-)
In your old version, the variable names was probably still CFG_FLASH_USE_BUFFER_WRITE
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Our business is run on trust. We trust you will pay in advance.
Hello Mr. Denk,
CFG_FLASH_USE_BUFFER_WRITE is already defined in the project-header file. I have configured the CPU registers for access the flash memory with maximum speed. But I think it is although very slow. If I use Windows CE to copy something to the flash memory I have transfer rates of 140kB/s. With U-Boot I have only 75kB/s.
What else can I do to increase the transfer rate?
Thanks,
Andreas
Dear "A. Geisreiter",
Quoted 7 lines · In message <006201ca1c0c$55a62ea0$00f28be0$@de> you wrote:
CFG_FLASH_USE_BUFFER_WRITEis already defined in the project-header file. I have configured the CPU registers for access the flash memory with maximum speed. But I think it is although very slow. If I use Windows CE to copy something to the flash memory I have transfer rates of 140kB/s. With U-Boot I have only 75kB/s.
What else can I do to increase the transfer rate?
I guess the PXA270 suffers like all (?) ARM from the fact that data cache is not effective. Jean-Christophe has been promising for some time to submit patches that are supposed to fix this.
I have no idea though when these might hit mainline.
Best regards,
Wolfgang Denk
Signature · 8 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Hello! I'm from outer space, and I've made myself look like a signa-
ture. While you are reading this, I'm having sex with your eyes. I
know it feels good to you, because you're smiling. I'm very horny, so
send me to someone else when you've had enough. Thanks!
Sincerely, A Stranger in a Strange Land