2.6.30.5-stable review

@@ -4623,27 +4623,10 @@ static ssize_t show_power_level(struct d
 				struct device_attribute *attr, char *buf)
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
-	int mode = priv->power_data.user_power_setting;
-	int system = priv->power_data.system_power_setting;
 	int level = priv->power_data.power_mode;
 	char *p = buf;
 
-	switch (system) {
-	case IWL_POWER_SYS_AUTO:
-		p += sprintf(p, "SYSTEM:auto");
-		break;
-	case IWL_POWER_SYS_AC:
-		p += sprintf(p, "SYSTEM:ac");
-		break;
-	case IWL_POWER_SYS_BATTERY:
-		p += sprintf(p, "SYSTEM:battery");
-		break;
-	}
-
-	p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO) ?
-			"fixed" : "auto");
-	p += sprintf(p, "\tINDEX:%d", level);
-	p += sprintf(p, "\n");
+	p += sprintf(p, "%d\n", level);
 	return p - buf + 1;
 }
 

@@ -3101,27 +3101,10 @@ static ssize_t show_power_level(struct d
 				struct device_attribute *attr, char *buf)
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
-	int mode = priv->power_data.user_power_setting;
-	int system = priv->power_data.system_power_setting;
 	int level = priv->power_data.power_mode;
 	char *p = buf;
 
-	switch (system) {
-	case IWL_POWER_SYS_AUTO:
-		p += sprintf(p, "SYSTEM:auto");
-		break;
-	case IWL_POWER_SYS_AC:
-		p += sprintf(p, "SYSTEM:ac");
-		break;
-	case IWL_POWER_SYS_BATTERY:
-		p += sprintf(p, "SYSTEM:battery");
-		break;
-	}
-
-	p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO) ?
-			"fixed" : "auto");
-	p += sprintf(p, "\tINDEX:%d", level);
-	p += sprintf(p, "\n");
+	p += sprintf(p, "%d\n", level);
 	return p - buf + 1;
 }
 

@@ -162,8 +162,8 @@ be_set_coalesce(struct net_device *netde
 		return -EINVAL;
 
 	adapter->max_rx_coal = coalesce->rx_max_coalesced_frames;
-	if (adapter->max_rx_coal > MAX_SKB_FRAGS)
-		adapter->max_rx_coal = MAX_SKB_FRAGS - 1;
+	if (adapter->max_rx_coal > BE_MAX_FRAGS_PER_FRAME)
+		adapter->max_rx_coal = BE_MAX_FRAGS_PER_FRAME;
 
 	/* if AIC is being turned on now, start with an EQD of 0 */
 	if (rx_eq->enable_aic == 0 &&

@@ -73,7 +73,7 @@ static inline char *nic_name(struct pci_
 #define RX_FRAGS_REFILL_WM	(RX_Q_LEN - MAX_RX_POST)
 
 #define BE_MAX_LRO_DESCRIPTORS  16
-#define BE_MAX_FRAGS_PER_FRAME  16
+#define BE_MAX_FRAGS_PER_FRAME  (min((u32) 16, (u32) MAX_SKB_FRAGS))
 
 struct be_dma_mem {
 	void *va;

88 lines not on this page · raw message

@@ -1762,6 +1762,9 @@ static int e100_rx_indicate(struct nic *
 
 			if (ioread8(&nic->csr->scb.status) & rus_no_res)
 				nic->ru_running = RU_SUSPENDED;
+		pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+					       sizeof(struct rfd),
+					       PCI_DMA_BIDIRECTIONAL);
 		return -ENODATA;
 	}
 

@@ -292,8 +292,8 @@ static struct xfrm_algo_desc ealg_list[]
 	}
 },
 {
-	.name = "cbc(cast128)",
-	.compat = "cast128",
+	.name = "cbc(cast5)",
+	.compat = "cast5",
 
 	.uinfo = {
 		.encr = {

@@ -2441,7 +2441,7 @@ static int sky2_status_intr(struct sky2_
 			if (likely(status >> 16 == (status & 0xffff))) {
 				skb = sky2->rx_ring[sky2->rx_next].skb;
 				skb->ip_summed = CHECKSUM_COMPLETE;
-				skb->csum = status & 0xffff;
+				skb->csum = le16_to_cpu(status);
 			} else {
 				printk(KERN_NOTICE PFX "%s: hardware receive "
 				       "checksum problem (status = %#x)\n",

@@ -307,9 +307,10 @@ static const struct usb_device_id	produc
 	USB_DEVICE (0x1286, 0x8001),    // "blob" bootloader
 	.driver_info =  (unsigned long) &blob_info,
 }, {
-	// Linux Ethernet/RNDIS gadget on pxa210/25x/26x, second config
-	// e.g. Gumstix, current OpenZaurus, ...
-	USB_DEVICE_VER (0x0525, 0xa4a2, 0x0203, 0x0203),
+	// Linux Ethernet/RNDIS gadget, mostly on PXA, second config
+	// e.g. Gumstix, current OpenZaurus, ... or anything else
+	// that just enables this gadget option.
+	USB_DEVICE (0x0525, 0xa4a2),
 	.driver_info =	(unsigned long) &linuxdev_info,
 },
 #endif

@@ -935,8 +935,23 @@ static struct sock *sk_prot_alloc(struct
 	struct kmem_cache *slab;
 
 	slab = prot->slab;
-	if (slab != NULL)
-		sk = kmem_cache_alloc(slab, priority);
+	if (slab != NULL) {
+		sk = kmem_cache_alloc(slab, priority & ~__GFP_ZERO);
+		if (!sk)
+			return sk;
+		if (priority & __GFP_ZERO) {
+			/*
+			 * caches using SLAB_DESTROY_BY_RCU should let
+			 * sk_node.next un-modified. Special care is taken
+			 * when initializing object to zero.
+			 */
+			if (offsetof(struct sock, sk_node.next) != 0)
+				memset(sk, 0, offsetof(struct sock, sk_node.next));
+			memset(&sk->sk_node.pprev, 0,
+			       prot->obj_size - offsetof(struct sock,
+							 sk_node.pprev));
+		}
+	}
 	else
 		sk = kmalloc(prot->obj_size, priority);
 

@@ -103,15 +103,15 @@ struct net;
 
 /**
  *	struct sock_common - minimal network layer representation of sockets
+ *	@skc_node: main hash linkage for various protocol lookup tables
+ *	@skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol
+ *	@skc_refcnt: reference count
+ *	@skc_hash: hash value used with various protocol lookup tables
  *	@skc_family: network address family
  *	@skc_state: Connection state
  *	@skc_reuse: %SO_REUSEADDR setting
  *	@skc_bound_dev_if: bound device index if != 0
- *	@skc_node: main hash linkage for various protocol lookup tables
- *	@skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol
  *	@skc_bind_node: bind hash linkage for various protocol lookup tables
- *	@skc_refcnt: reference count
- *	@skc_hash: hash value used with various protocol lookup tables
  *	@skc_prot: protocol handlers inside a network family
  *	@skc_net: reference to the network namespace of this socket
  *

@@ -119,17 +119,21 @@ struct net;
  *	for struct sock and struct inet_timewait_sock.
  */
 struct sock_common {
-	unsigned short		skc_family;
-	volatile unsigned char	skc_state;
-	unsigned char		skc_reuse;
-	int			skc_bound_dev_if;
+	/*
+	 * first fields are not copied in sock_copy()
+	 */
 	union {
 		struct hlist_node	skc_node;
 		struct hlist_nulls_node skc_nulls_node;
 	};
-	struct hlist_node	skc_bind_node;
 	atomic_t		skc_refcnt;
+
 	unsigned int		skc_hash;
+	unsigned short		skc_family;
+	volatile unsigned char	skc_state;
+	unsigned char		skc_reuse;
+	int			skc_bound_dev_if;
+	struct hlist_node	skc_bind_node;
 	struct proto		*skc_prot;
 #ifdef CONFIG_NET_NS
 	struct net	 	*skc_net;

@@ -207,15 +211,17 @@ struct sock {
 	 * don't add nothing before this first member (__sk_common) --acme
 	 */
 	struct sock_common	__sk_common;
+#define sk_node			__sk_common.skc_node
+#define sk_nulls_node		__sk_common.skc_nulls_node
+#define sk_refcnt		__sk_common.skc_refcnt
+
+#define sk_copy_start		__sk_common.skc_hash
+#define sk_hash			__sk_common.skc_hash
 #define sk_family		__sk_common.skc_family
 #define sk_state		__sk_common.skc_state
 #define sk_reuse		__sk_common.skc_reuse
 #define sk_bound_dev_if		__sk_common.skc_bound_dev_if
-#define sk_node			__sk_common.skc_node
-#define sk_nulls_node		__sk_common.skc_nulls_node
 #define sk_bind_node		__sk_common.skc_bind_node
-#define sk_refcnt		__sk_common.skc_refcnt
-#define sk_hash			__sk_common.skc_hash
 #define sk_prot			__sk_common.skc_prot
 #define sk_net			__sk_common.skc_net
 	unsigned char		sk_shutdown : 2,

@@ -915,13 +915,19 @@ static inline void sock_lock_init(struct
 			af_family_keys + sk->sk_family);
 }
 
+/*
+ * Copy all fields from osk to nsk but nsk->sk_refcnt must not change yet,
+ * even temporarly, because of RCU lookups. sk_node should also be left as is.
+ */
 static void sock_copy(struct sock *nsk, const struct sock *osk)
 {
 #ifdef CONFIG_SECURITY_NETWORK
 	void *sptr = nsk->sk_security;
 #endif
-
-	memcpy(nsk, osk, osk->sk_prot->obj_size);
+	BUILD_BUG_ON(offsetof(struct sock, sk_copy_start) !=
+		     sizeof(osk->sk_node) + sizeof(osk->sk_refcnt));
+	memcpy(&nsk->sk_copy_start, &osk->sk_copy_start,
+	       osk->sk_prot->obj_size - offsetof(struct sock, sk_copy_start));
 #ifdef CONFIG_SECURITY_NETWORK
 	nsk->sk_security = sptr;
 	security_sk_clone(osk, nsk);

@@ -1118,6 +1124,11 @@ struct sock *sk_clone(const struct sock 
 
 		newsk->sk_err	   = 0;
 		newsk->sk_priority = 0;
+		/*
+		 * Before updating sk_refcnt, we must commit prior changes to memory
+		 * (Documentation/RCU/rculist_nulls.txt for details)
+		 */
+		smp_wmb();
 		atomic_set(&newsk->sk_refcnt, 2);
 
 		/*

@@ -1809,6 +1820,11 @@ void sock_init_data(struct socket *sock,
 
 	sk->sk_stamp = ktime_set(-1L, 0);
 
+	/*
+	 * Before updating sk_refcnt, we must commit prior changes to memory
+	 * (Documentation/RCU/rculist_nulls.txt for details)
+	 */
+	smp_wmb();
 	atomic_set(&sk->sk_refcnt, 1);
 	atomic_set(&sk->sk_drops, 0);
 }

@@ -2788,9 +2788,11 @@ static void net_rx_action(struct softirq
 		 * move the instance around on the list at-will.
 		 */
 		if (unlikely(work == weight)) {
-			if (unlikely(napi_disable_pending(n)))
-				__napi_complete(n);
-			else
+			if (unlikely(napi_disable_pending(n))) {
+				local_irq_enable();
+				napi_complete(n);
+				local_irq_disable();
+			} else
 				list_move_tail(&n->poll_list, list);
 		}
 

@@ -1856,15 +1856,14 @@ static inline int net_gso_ok(int feature
 
 static inline int skb_gso_ok(struct sk_buff *skb, int features)
 {
-	return net_gso_ok(features, skb_shinfo(skb)->gso_type);
+	return net_gso_ok(features, skb_shinfo(skb)->gso_type) &&
+	       (!skb_shinfo(skb)->frag_list || (features & NETIF_F_FRAGLIST));
 }
 
 static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb)
 {
 	return skb_is_gso(skb) &&
 	       (!skb_gso_ok(skb, dev->features) ||
-	        (skb_shinfo(skb)->frag_list &&
-	         !(dev->features & NETIF_F_FRAGLIST)) ||
 		unlikely(skb->ip_summed != CHECKSUM_PARTIAL));
 }
 

@@ -448,6 +448,7 @@ static inline void sctp_skb_set_owner_r(
 {
 	struct sctp_ulpevent *event = sctp_skb2event(skb);
 
+	skb_orphan(skb);
 	skb->sk = sk;
 	skb->destructor = sctp_sock_rfree;
 	atomic_add(event->rmem_len, &sk->sk_rmem_alloc);

@@ -1231,6 +1231,8 @@ static inline void skb_set_owner_w(struc
 
 static inline void skb_set_owner_r(struct sk_buff *skb, struct sock *sk)
 {
+	skb_orphan(skb);
+	skb_orphan(skb);
 	skb->sk = sk;
 	skb->destructor = sock_rfree;
 	atomic_add(skb->truesize, &sk->sk_rmem_alloc);

@@ -437,8 +437,7 @@ free:
 int ax25_kiss_rcv(struct sk_buff *skb, struct net_device *dev,
 		  struct packet_type *ptype, struct net_device *orig_dev)
 {
-	skb->sk = NULL;		/* Initially we don't know who it's for */
-	skb->destructor = NULL;	/* Who initializes this, dammit?! */
+	skb_orphan(skb);
 
 	if (!net_eq(dev_net(dev), &init_net)) {
 		kfree_skb(skb);

@@ -2284,8 +2284,6 @@ ncls:
 	if (!skb)
 		goto out;
 
-	skb_orphan(skb);
-
 	type = skb->protocol;
 	list_for_each_entry_rcu(ptype,
 			&ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) {

@@ -913,9 +913,6 @@ static int irda_accept(struct socket *so
 	/* Clean up the original one to keep it in listen state */
 	irttp_listen(self->tsap);
 
-	/* Wow ! What is that ? Jean II */
-	skb->sk = NULL;
-	skb->destructor = NULL;
 	kfree_skb(skb);
 	sk->sk_ack_backlog--;
 

@@ -196,6 +196,7 @@ static int ircomm_lmp_data_request(struc
 	/* Don't forget to refcount it - see ircomm_tty_do_softint() */
 	skb_get(skb);
 
+	skb_orphan(skb);
 	skb->destructor = ircomm_lmp_flow_control;
 
 	if ((self->pkt_count++ > 7) && (self->flow_status == FLOW_START)) {

@@ -437,6 +437,9 @@ int ip_rcv(struct sk_buff *skb, struct n
 	/* Remove any debris in the socket control block */
 	memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
 
+	/* Must drop socket now because of tproxy. */
+	skb_orphan(skb);
+
 	return NF_HOOK(PF_INET, NF_INET_PRE_ROUTING, skb, dev, NULL,
 		       ip_rcv_finish);
 

@@ -139,6 +139,9 @@ int ipv6_rcv(struct sk_buff *skb, struct
 
 	rcu_read_unlock();
 
+	/* Must drop socket now because of tproxy. */
+	skb_orphan(skb);
+
 	return NF_HOOK(PF_INET6, NF_INET_PRE_ROUTING, skb, dev, NULL,
 		       ip6_rcv_finish);
 err:

@@ -285,6 +285,13 @@ typedef struct drm_i915_private {
 	u8 saveDACMASK;
 	u8 saveCR[37];
 	uint64_t saveFENCE[16];
+	u32 saveCURACNTR;
+	u32 saveCURAPOS;
+	u32 saveCURABASE;
+	u32 saveCURBCNTR;
+	u32 saveCURBPOS;
+	u32 saveCURBBASE;
+	u32 saveCURSIZE;
 
 	struct {
 		struct drm_mm gtt_space;

@@ -642,6 +649,7 @@ void i915_gem_detach_phys_object(struct 
 void i915_gem_free_all_phys_object(struct drm_device *dev);
 int i915_gem_object_get_pages(struct drm_gem_object *obj);
 void i915_gem_object_put_pages(struct drm_gem_object *obj);
+void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv);
 
 /* i915_gem_tiling.c */
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);

@@ -295,6 +295,16 @@ int i915_save_state(struct drm_device *d
 	i915_save_palette(dev, PIPE_B);
 	dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT);
 
+	/* Cursor state */
+	dev_priv->saveCURACNTR = I915_READ(CURACNTR);
+	dev_priv->saveCURAPOS = I915_READ(CURAPOS);
+	dev_priv->saveCURABASE = I915_READ(CURABASE);
+	dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
+	dev_priv->saveCURBPOS = I915_READ(CURBPOS);
+	dev_priv->saveCURBBASE = I915_READ(CURBBASE);
+	if (!IS_I9XX(dev))
+		dev_priv->saveCURSIZE = I915_READ(CURSIZE);
+
 	/* CRT state */
 	dev_priv->saveADPA = I915_READ(ADPA);
 

@@ -480,6 +490,16 @@ int i915_restore_state(struct drm_device
 	I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
 	I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
 
+	/* Cursor state */
+	I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
+	I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
+	I915_WRITE(CURABASE, dev_priv->saveCURABASE);
+	I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
+	I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
+	I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
+	if (!IS_I9XX(dev))
+		I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
+
 	/* CRT state */
 	I915_WRITE(ADPA, dev_priv->saveADPA);
 

@@ -420,8 +420,14 @@ static const struct dmi_system_id intel_
 			DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
 		},
 	},
-
-	/* FIXME: add a check for the Aopen Mini PC */
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "AOpen Mini PC",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "AOpen"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
+		},
+	},
 
 	{ }	/* terminating entry */
 };

@@ -1153,8 +1153,11 @@ int i915_driver_load(struct drm_device *
 #endif
 
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
-	if (IS_GM45(dev))
+	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
+	if (IS_G4X(dev)) {
+		dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
 		dev->driver->get_vblank_counter = gm45_get_vblank_counter;
+	}
 
 	i915_gem_load(dev);
 

@@ -572,8 +572,6 @@ int i915_driver_irq_postinstall(struct d
 
 	dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
 
-	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
-
 	/* Unmask the interrupts that we always want on. */
 	dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
 

@@ -857,9 +857,15 @@ void intelfb_restore(void)
 	drm_crtc_helper_set_config(&kernelfb_mode);
 }
 
+static void intelfb_restore_work_fn(struct work_struct *ignored)
+{
+	intelfb_restore();
+}
+static DECLARE_WORK(intelfb_restore_work, intelfb_restore_work_fn);
+
 static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3)
 {
-        intelfb_restore();
+        schedule_work(&intelfb_restore_work);
 }
 
 static struct sysrq_key_op sysrq_intelfb_restore_op = {

@@ -428,6 +428,13 @@ static const struct dmi_system_id intel_
 			DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
 		},
 	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Aopen i945GTt-VFA",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
+		},
+	},
 
 	{ }	/* terminating entry */
 };

@@ -1590,6 +1590,7 @@ struct drm_crtc *intel_get_load_detect_p
 	}
 
 	encoder->crtc = crtc;
+	intel_output->base.encoder = encoder;
 	intel_output->load_detect_temp = true;
 
 	intel_crtc = to_intel_crtc(crtc);

@@ -1625,6 +1626,7 @@ void intel_release_load_detect_pipe(stru
 
 	if (intel_output->load_detect_temp) {
 		encoder->crtc = NULL;
+		intel_output->base.encoder = NULL;
 		intel_output->load_detect_temp = false;
 		crtc->enabled = drm_helper_crtc_in_use(crtc);
 		drm_helper_disable_unused_functions(dev);

@@ -4154,6 +4154,7 @@ i915_gem_lastclose(struct drm_device *de
 void
 i915_gem_load(struct drm_device *dev)
 {
+	int i;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
 	spin_lock_init(&dev_priv->mm.active_list_lock);

@@ -4173,6 +4174,18 @@ i915_gem_load(struct drm_device *dev)
 	else
 		dev_priv->num_fence_regs = 8;
 
+	/* Initialize fence registers to zero */
+	if (IS_I965G(dev)) {
+		for (i = 0; i < 16; i++)
+			I915_WRITE64(FENCE_REG_965_0 + (i * 8), 0);
+	} else {
+		for (i = 0; i < 8; i++)
+			I915_WRITE(FENCE_REG_830_0 + (i * 4), 0);
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				I915_WRITE(FENCE_REG_945_8 + (i * 4), 0);
+	}
+
 	i915_gem_detect_bit_6_swizzle(dev);
 }
 

@@ -185,10 +185,12 @@ parse_general_features(struct drm_i915_p
 		dev_priv->lvds_use_ssc = general->enable_ssc;
 
 		if (dev_priv->lvds_use_ssc) {
-		  if (IS_I855(dev_priv->dev))
-		    dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48;
-		  else
-		    dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96;
+			if (IS_I85X(dev_priv->dev))
+				dev_priv->lvds_ssc_freq =
+					general->ssc_freq ? 66 : 48;
+			else
+				dev_priv->lvds_ssc_freq =
+					general->ssc_freq ? 100 : 96;
 		}
 	}
 }

@@ -939,8 +939,10 @@ again:
 	/* Remove from old parent's list and insert into new parent's list. */
 	sysfs_unlink_sibling(sd);
 	sysfs_get(new_parent_sd);
+	drop_nlink(old_parent->d_inode);
 	sysfs_put(sd->s_parent);
 	sd->s_parent = new_parent_sd;
+	inc_nlink(new_parent->d_inode);
 	sysfs_link_sibling(sd);
 
  out_unlock:

@@ -961,7 +961,7 @@ int usb_stor_Bulk_max_lun(struct us_data
 				 US_BULK_GET_MAX_LUN, 
 				 USB_DIR_IN | USB_TYPE_CLASS | 
 				 USB_RECIP_INTERFACE,
-				 0, us->ifnum, us->iobuf, 1, HZ);
+				 0, us->ifnum, us->iobuf, 1, 10*HZ);
 
 	US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", 
 		  result, us->iobuf[0]);

@@ -30,7 +30,7 @@
 /* Intel X38 register addresses - device 0 function 0 - DRAM Controller */
 
 #define X38_MCHBAR_LOW	0x48	/* MCH Memory Mapped Register BAR */
-#define X38_MCHBAR_HIGH	0x4b
+#define X38_MCHBAR_HIGH	0x4c
 #define X38_MCHBAR_MASK	0xfffffc000ULL	/* bits 35:14 */
 #define X38_MMR_WINDOW_SIZE	16384
 

@@ -56,7 +56,7 @@ static void sas_form_port(struct asd_sas
 		}
 	}
 
-	/* find a port */
+	/* see if the phy should be part of a wide port */
 	spin_lock_irqsave(&sas_ha->phy_port_lock, flags);
 	for (i = 0; i < sas_ha->num_phys; i++) {
 		port = sas_ha->sas_port[i];

@@ -69,12 +69,23 @@ static void sas_form_port(struct asd_sas
 			SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
 				    port->id);
 			break;
-		} else if (*(u64 *) port->sas_addr == 0 && port->num_phys==0) {
-			memcpy(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE);
-			break;
 		}
 		spin_unlock(&port->phy_list_lock);
 	}
+	/* The phy does not match any existing port, create a new one */
+	if (i == sas_ha->num_phys) {
+		for (i = 0; i < sas_ha->num_phys; i++) {
+			port = sas_ha->sas_port[i];
+			spin_lock(&port->phy_list_lock);
+			if (*(u64 *)port->sas_addr == 0
+				&& port->num_phys == 0) {
+				memcpy(port->sas_addr, phy->sas_addr,
+					SAS_ADDR_SIZE);
+				break;
+			}
+			spin_unlock(&port->phy_list_lock);
+		}
+	}
 
 	if (i >= sas_ha->num_phys) {
 		printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",

@@ -55,7 +55,7 @@ void cifs_dfs_release_automount_timer(vo
  * i.e. strips from UNC trailing path that is not part of share
  * name and fixup missing '\' in the begining of DFS node refferal
  * if neccessary.
- * Returns pointer to share name on success or NULL on error.
+ * Returns pointer to share name on success or ERR_PTR on error.
  * Caller is responsible for freeing returned string.
  */
 static char *cifs_get_share_name(const char *node_name)

@@ -68,7 +68,7 @@ static char *cifs_get_share_name(const c
 	UNC = kmalloc(len+2 /*for term null and additional \ if it's missed */,
 			 GFP_KERNEL);
 	if (!UNC)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	/* get share name and server name */
 	if (node_name[1] != '\\') {

@@ -87,7 +87,7 @@ static char *cifs_get_share_name(const c
 		cERROR(1, ("%s: no server name end in node name: %s",
 			__func__, node_name));
 		kfree(UNC);
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	/* find sharename end */

@@ -133,6 +133,12 @@ char *cifs_compose_mount_options(const c
 		return ERR_PTR(-EINVAL);
 
 	*devname = cifs_get_share_name(ref->node_name);
+	if (IS_ERR(*devname)) {
+		rc = PTR_ERR(*devname);
+		*devname = NULL;
+		goto compose_mount_options_err;
+	}
+
 	rc = dns_resolve_server_name_to_ip(*devname, &srvIP);
 	if (rc != 0) {
 		cERROR(1, ("%s: Failed to resolve server part of %s to IP: %d",

@@ -2563,11 +2563,20 @@ remote_path_check:
 
 			if (mount_data != mount_data_global)
 				kfree(mount_data);
+
 			mount_data = cifs_compose_mount_options(
 					cifs_sb->mountdata, full_path + 1,
 					referrals, &fake_devname);
-			kfree(fake_devname);
+
 			free_dfs_info_array(referrals, num_referrals);
+			kfree(fake_devname);
+			kfree(full_path);
+
+			if (IS_ERR(mount_data)) {
+				rc = PTR_ERR(mount_data);
+				mount_data = NULL;
+				goto mount_fail_check;
+			}
 
 			if (tcon)
 				cifs_put_tcon(tcon);

@@ -2575,8 +2584,6 @@ remote_path_check:
 				cifs_put_smb_ses(pSesInfo);
 
 			cleanup_volume_info(&volume_info);
-			FreeXid(xid);
-			kfree(full_path);
 			referral_walks_count++;
 			goto try_mount_again;
 		}

@@ -5757,14 +5757,48 @@ static struct backlight_ops ibm_backligh
 
 /* --------------------------------------------------------------------- */
 
+/*
+ * These are only useful for models that have only one possibility
+ * of GPU.  If the BIOS model handles both ATI and Intel, don't use
+ * these quirks.
+ */
+#define TPACPI_BRGHT_Q_NOEC	0x0001	/* Must NOT use EC HBRV */
+#define TPACPI_BRGHT_Q_EC	0x0002  /* Should or must use EC HBRV */
+#define TPACPI_BRGHT_Q_ASK	0x8000	/* Ask for user report */
+
+static const struct tpacpi_quirk brightness_quirk_table[] __initconst = {
+	/* Models with ATI GPUs known to require ECNVRAM mode */
+	TPACPI_Q_IBM('1', 'Y', TPACPI_BRGHT_Q_EC),	/* T43/p ATI */
+
+	/* Models with ATI GPUs (waiting confirmation) */
+	TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+	TPACPI_Q_IBM('1', 'Q', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+	TPACPI_Q_IBM('7', '6', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+	TPACPI_Q_IBM('7', '8', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+
+	/* Models with Intel Extreme Graphics 2 (waiting confirmation) */
+	TPACPI_Q_IBM('1', 'V', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+	TPACPI_Q_IBM('1', 'W', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+	TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+
+	/* Models with Intel GMA900 */
+	TPACPI_Q_IBM('7', '0', TPACPI_BRGHT_Q_NOEC),	/* T43, R52 */
+	TPACPI_Q_IBM('7', '4', TPACPI_BRGHT_Q_NOEC),	/* X41 */
+	TPACPI_Q_IBM('7', '5', TPACPI_BRGHT_Q_NOEC),	/* X41 Tablet */
+};
+
 static int __init brightness_init(struct ibm_init_struct *iibm)
 {
 	int b;
+	unsigned long quirks;
 
 	vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n");
 
 	mutex_init(&brightness_mutex);
 
+	quirks = tpacpi_check_quirks(brightness_quirk_table,
+				ARRAY_SIZE(brightness_quirk_table));
+
 	/*
 	 * We always attempt to detect acpi support, so as to switch
 	 * Lenovo Vista BIOS to ACPI brightness mode even if we are not

@@ -5821,23 +5855,13 @@ static int __init brightness_init(struct
 	/* TPACPI_BRGHT_MODE_AUTO not implemented yet, just use default */
 	if (brightness_mode == TPACPI_BRGHT_MODE_AUTO ||
 	    brightness_mode == TPACPI_BRGHT_MODE_MAX) {
-		if (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) {
-			/*
-			 * IBM models that define HBRV probably have
-			 * EC-based backlight level control
-			 */
-			if (acpi_evalf(ec_handle, NULL, "HBRV", "qd"))
-				/* T40-T43, R50-R52, R50e, R51e, X31-X41 */
-				brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
-			else
-				/* all other IBM ThinkPads */
-				brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
-		} else
-			/* All Lenovo ThinkPads */
+		if (quirks & TPACPI_BRGHT_Q_EC)
+			brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
+		else
 			brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
 
 		dbg_printk(TPACPI_DBG_BRGHT,
-			   "selected brightness_mode=%d\n",
+			   "driver auto-selected brightness_mode=%d\n",
 			   brightness_mode);
 	}
 

@@ -5858,6 +5882,15 @@ static int __init brightness_init(struct
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
 			"brightness is supported\n");
 
+	if (quirks & TPACPI_BRGHT_Q_ASK) {
+		printk(TPACPI_NOTICE
+			"brightness: will use unverified default: "
+			"brightness_mode=%d\n", brightness_mode);
+		printk(TPACPI_NOTICE
+			"brightness: please report to %s whether it works well "
+			"or not on your ThinkPad\n", TPACPI_MAIL);
+	}
+
 	ibm_backlight_device->props.max_brightness =
 				(tp_features.bright_16levels)? 15 : 7;
 	ibm_backlight_device->props.brightness = b & TP_EC_BACKLIGHT_LVLMSK;

@@ -1876,12 +1876,26 @@ static void nilfs_end_page_io(struct pag
 	if (!page)
 		return;
 
-	if (buffer_nilfs_node(page_buffers(page)) && !PageWriteback(page))
+	if (buffer_nilfs_node(page_buffers(page)) && !PageWriteback(page)) {
 		/*
 		 * For b-tree node pages, this function may be called twice
 		 * or more because they might be split in a segment.
 		 */
+		if (PageDirty(page)) {
+			/*
+			 * For pages holding split b-tree node buffers, dirty
+			 * flag on the buffers may be cleared discretely.
+			 * In that case, the page is once redirtied for
+			 * remaining buffers, and it must be cancelled if
+			 * all the buffers get cleaned later.
+			 */
+			lock_page(page);
+			if (nilfs_page_buffers_clean(page))
+				__nilfs_clear_page_dirty(page);
+			unlock_page(page);
+		}
 		return;
+	}
 
 	__nilfs_end_page_io(page, err);
 }

@@ -798,9 +798,16 @@ print_graph_function(struct trace_iterat
 
 	switch (entry->type) {
 	case TRACE_GRAPH_ENT: {
-		struct ftrace_graph_ent_entry *field;
+		/*
+		 * print_graph_entry() may consume the current event,
+		 * thus @field may become invalid, so we need to save it.
+		 * sizeof(struct ftrace_graph_ent_entry) is very small,
+		 * it can be safely saved at the stack.
+		 */
+		struct ftrace_graph_ent_entry *field, saved;
 		trace_assign_type(field, entry);
-		return print_graph_entry(field, s, iter);
+		saved = *field;
+		return print_graph_entry(&saved, s, iter);
 	}
 	case TRACE_GRAPH_RET: {
 		struct ftrace_graph_ret_entry *field;

@@ -2993,7 +2993,8 @@ tracing_fill_pipe_page(size_t rem, struc
 			break;
 		}
 
-		trace_consume(iter);
+		if (ret != TRACE_TYPE_NO_CONSUME)
+			trace_consume(iter);
 		rem -= count;
 		if (!find_next_entry_inc(iter))	{
 			rem = 0;

@@ -4122,8 +4123,11 @@ static void __ftrace_dump(bool disable_t
 		iter.pos = -1;
 
 		if (find_next_entry_inc(&iter) != NULL) {
-			print_trace_line(&iter);
-			trace_consume(&iter);
+			int ret;
+
+			ret = print_trace_line(&iter);
+			if (ret != TRACE_TYPE_NO_CONSUME)
+				trace_consume(&iter);
 		}
 
 		trace_printk_seq(&iter.seq);

@@ -55,7 +55,7 @@ static ssize_t eisa_eeprom_read(struct f
 	ssize_t ret;
 	int i;
 	
-	if (*ppos >= HPEE_MAX_LENGTH)
+	if (*ppos < 0 || *ppos >= HPEE_MAX_LENGTH)
 		return 0;
 	
 	count = *ppos + count < HPEE_MAX_LENGTH ? count : HPEE_MAX_LENGTH - *ppos;

@@ -118,7 +118,7 @@ static int cmp_ies(u8 num, u8 *ies1, siz
 
 	if (!ie1 && !ie2)
 		return 0;
-	if (!ie1)
+	if (!ie1 || !ie2)
 		return -1;
 
 	r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1]));

@@ -171,6 +171,8 @@ static bool is_mesh(struct cfg80211_bss 
 	ie = find_ie(WLAN_EID_MESH_CONFIG,
 		     a->information_elements,
 		     a->len_information_elements);
+	if (!ie)
+		return false;
 	if (ie[1] != IEEE80211_MESH_CONFIG_LEN)
 		return false;
 

@@ -202,6 +202,12 @@ static int no_timer_create(struct k_itim
 	return -EOPNOTSUPP;
 }
 
+static int no_nsleep(const clockid_t which_clock, int flags,
+		     struct timespec *tsave, struct timespec __user *rmtp)
+{
+	return -EOPNOTSUPP;
+}
+
 /*
  * Return nonzero if we know a priori this clockid_t value is bogus.
  */

@@ -254,6 +260,7 @@ static __init int init_posix_timers(void
 		.clock_get = posix_get_monotonic_raw,
 		.clock_set = do_posix_clock_nosettime,
 		.timer_create = no_timer_create,
+		.nsleep = no_nsleep,
 	};
 
 	register_posix_clock(CLOCK_REALTIME, &clock_realtime);

@@ -397,6 +397,14 @@ static struct dmi_system_id __initdata a
 		},
 	},
 	{
+	.callback = init_set_sci_en_on_resume,
+	.ident = "Hewlett-Packard HP G7000 Notebook PC",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP G7000 Notebook PC"),
+		},
+	},
+	{
 	.callback = init_old_suspend_ordering,
 	.ident = "Panasonic CF51-2L",
 	.matches = {

@@ -22,8 +22,8 @@
 /* system i/o configuration register low */
 #define MPC83XX_SICRL_OFFS         0x114
 #define MPC834X_SICRL_USB_MASK     0x60000000
-#define MPC834X_SICRL_USB0         0x40000000
-#define MPC834X_SICRL_USB1         0x20000000
+#define MPC834X_SICRL_USB0         0x20000000
+#define MPC834X_SICRL_USB1         0x40000000
 #define MPC831X_SICRL_USB_MASK     0x00000c00
 #define MPC831X_SICRL_USB_ULPI     0x00000800
 #define MPC8315_SICRL_USB_MASK     0x000000fc

@@ -47,25 +47,25 @@ int mpc834x_usb_cfg(void)
 		sccr |= MPC83XX_SCCR_USB_DRCM_11;  /* 1:3 */
 
 		prop = of_get_property(np, "phy_type", NULL);
+		port1_is_dr = 1;
 		if (prop && (!strcmp(prop, "utmi") ||
 					!strcmp(prop, "utmi_wide"))) {
 			sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
 			sicrh |= MPC834X_SICRH_USB_UTMI;
-			port1_is_dr = 1;
+			port0_is_dr = 1;
 		} else if (prop && !strcmp(prop, "serial")) {
 			dr_mode = of_get_property(np, "dr_mode", NULL);
 			if (dr_mode && !strcmp(dr_mode, "otg")) {
 				sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
-				port1_is_dr = 1;
+				port0_is_dr = 1;
 			} else {
-				sicrl |= MPC834X_SICRL_USB0;
+				sicrl |= MPC834X_SICRL_USB1;
 			}
 		} else if (prop && !strcmp(prop, "ulpi")) {
-			sicrl |= MPC834X_SICRL_USB0;
+			sicrl |= MPC834X_SICRL_USB1;
 		} else {
 			printk(KERN_WARNING "834x USB PHY type not supported\n");
 		}
-		port0_is_dr = 1;
 		of_node_put(np);
 	}
 	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");

@@ -2341,7 +2341,7 @@ void hugetlb_unreserve_pages(struct inod
 	long chg = region_truncate(&inode->i_mapping->private_list, offset);
 
 	spin_lock(&inode->i_lock);
-	inode->i_blocks -= blocks_per_huge_page(h);
+	inode->i_blocks -= (blocks_per_huge_page(h) * freed);
 	spin_unlock(&inode->i_lock);
 
 	hugetlb_put_quota(inode->i_mapping, (chg - freed));

@@ -858,7 +858,7 @@ static struct page *__rmqueue(struct zon
  */
 static int rmqueue_bulk(struct zone *zone, unsigned int order, 
 			unsigned long count, struct list_head *list,
-			int migratetype)
+			int migratetype, int cold)
 {
 	int i;
 	

@@ -877,7 +877,10 @@ static int rmqueue_bulk(struct zone *zon
 		 * merge IO requests if the physical pages are ordered
 		 * properly.
 		 */
-		list_add(&page->lru, list);
+		if (likely(cold == 0))
+			list_add(&page->lru, list);
+		else
+			list_add_tail(&page->lru, list);
 		set_page_private(page, migratetype);
 		list = &page->lru;
 	}

@@ -1077,7 +1080,8 @@ again:
 		local_irq_save(flags);
 		if (!pcp->count) {
 			pcp->count = rmqueue_bulk(zone, 0,
-					pcp->batch, &pcp->list, migratetype);
+					pcp->batch, &pcp->list,
+					migratetype, cold);
 			if (unlikely(!pcp->count))
 				goto failed;
 		}

@@ -1096,7 +1100,8 @@ again:
 		/* Allocate more to the pcp list if necessary */
 		if (unlikely(&page->lru == &pcp->list)) {
 			pcp->count += rmqueue_bulk(zone, 0,
-					pcp->batch, &pcp->list, migratetype);
+					pcp->batch, &pcp->list,
+					migratetype, cold);
 			page = list_entry(pcp->list.next, struct page, lru);
 		}
 

@@ -590,9 +590,12 @@ static int __change_page_attr(struct cpa
 	unsigned int level;
 	pte_t *kpte, old_pte;
 
-	if (cpa->flags & CPA_PAGES_ARRAY)
-		address = (unsigned long)page_address(cpa->pages[cpa->curpage]);
-	else if (cpa->flags & CPA_ARRAY)
+	if (cpa->flags & CPA_PAGES_ARRAY) {
+		struct page *page = cpa->pages[cpa->curpage];
+		if (unlikely(PageHighMem(page)))
+			return 0;
+		address = (unsigned long)page_address(page);
+	} else if (cpa->flags & CPA_ARRAY)
 		address = cpa->vaddr[cpa->curpage];
 	else
 		address = *cpa->vaddr;

@@ -695,9 +698,12 @@ static int cpa_process_alias(struct cpa_
 	 * No need to redo, when the primary call touched the direct
 	 * mapping already:
 	 */
-	if (cpa->flags & CPA_PAGES_ARRAY)
-		vaddr = (unsigned long)page_address(cpa->pages[cpa->curpage]);
-	else if (cpa->flags & CPA_ARRAY)
+	if (cpa->flags & CPA_PAGES_ARRAY) {
+		struct page *page = cpa->pages[cpa->curpage];
+		if (unlikely(PageHighMem(page)))
+			return 0;
+		vaddr = (unsigned long)page_address(page);
+	} else if (cpa->flags & CPA_ARRAY)
 		vaddr = cpa->vaddr[cpa->curpage];
 	else
 		vaddr = *cpa->vaddr;

@@ -1118,7 +1124,9 @@ int set_pages_array_uc(struct page **pag
 	int free_idx;
 
 	for (i = 0; i < addrinarray; i++) {
-		start = (unsigned long)page_address(pages[i]);
+		if (PageHighMem(pages[i]))
+			continue;
+		start = page_to_pfn(pages[i]) << PAGE_SHIFT;
 		end = start + PAGE_SIZE;
 		if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
 			goto err_out;

@@ -1131,7 +1139,9 @@ int set_pages_array_uc(struct page **pag
 err_out:
 	free_idx = i;
 	for (i = 0; i < free_idx; i++) {
-		start = (unsigned long)page_address(pages[i]);
+		if (PageHighMem(pages[i]))
+			continue;
+		start = page_to_pfn(pages[i]) << PAGE_SHIFT;
 		end = start + PAGE_SIZE;
 		free_memtype(start, end);
 	}

@@ -1160,7 +1170,9 @@ int set_pages_array_wb(struct page **pag
 		return retval;
 
 	for (i = 0; i < addrinarray; i++) {
-		start = (unsigned long)page_address(pages[i]);
+		if (PageHighMem(pages[i]))
+			continue;
+		start = page_to_pfn(pages[i]) << PAGE_SHIFT;
 		end = start + PAGE_SIZE;
 		free_memtype(start, end);
 	}

@@ -12,9 +12,15 @@ static inline unsigned long native_save_fl(void)
 {
 	unsigned long flags;
 
+	/*
+	 * Note: this needs to be "=r" not "=rm", because we have the
+	 * stack offset from what gcc expects at the time the "pop" is
+	 * executed, and so a memory reference with respect to the stack
+	 * would end up using the wrong address.
+	 */
 	asm volatile("# __raw_save_flags\n\t"
 		     "pushf ; pop %0"
-		     : "=g" (flags)
+		     : "=r" (flags)
 		     : /* no input */
 		     : "memory");
 

@@ -1002,12 +1002,15 @@ EXPORT_SYMBOL(set_memory_array_uc);
 int _set_memory_wc(unsigned long addr, int numpages)
 {
 	int ret;
+	unsigned long addr_copy = addr;
+
 	ret = change_page_attr_set(&addr, numpages,
 				    __pgprot(_PAGE_CACHE_UC_MINUS), 0);
-
 	if (!ret) {
-		ret = change_page_attr_set(&addr, numpages,
-				    __pgprot(_PAGE_CACHE_WC), 0);
+		ret = change_page_attr_set_clr(&addr_copy, numpages,
+					       __pgprot(_PAGE_CACHE_WC),
+					       __pgprot(_PAGE_CACHE_MASK),
+					       0, 0, NULL);
 	}
 	return ret;
 }

@@ -4310,6 +4310,15 @@ raid5_size(mddev_t *mddev, sector_t sect
 	return sectors * (raid_disks - conf->max_degraded);
 }
 
+static void free_conf(raid5_conf_t *conf)
+{
+	shrink_stripes(conf);
+	safe_put_page(conf->spare_page);
+	kfree(conf->disks);
+	kfree(conf->stripe_hashtbl);
+	kfree(conf);
+}
+
 static raid5_conf_t *setup_conf(mddev_t *mddev)
 {
 	raid5_conf_t *conf;

@@ -4439,11 +4448,7 @@ static raid5_conf_t *setup_conf(mddev_t 
 
  abort:
 	if (conf) {
-		shrink_stripes(conf);
-		safe_put_page(conf->spare_page);
-		kfree(conf->disks);
-		kfree(conf->stripe_hashtbl);
-		kfree(conf);
+		free_conf(conf);
 		return ERR_PTR(-EIO);
 	} else
 		return ERR_PTR(-ENOMEM);

@@ -4609,12 +4614,8 @@ abort:
 	md_unregister_thread(mddev->thread);
 	mddev->thread = NULL;
 	if (conf) {
-		shrink_stripes(conf);
 		print_raid5_conf(conf);
-		safe_put_page(conf->spare_page);
-		kfree(conf->disks);
-		kfree(conf->stripe_hashtbl);
-		kfree(conf);
+		free_conf(conf);
 	}
 	mddev->private = NULL;
 	printk(KERN_ALERT "raid5: failed to run raid set %s\n", mdname(mddev));

@@ -4629,13 +4630,10 @@ static int stop(mddev_t *mddev)
 
 	md_unregister_thread(mddev->thread);
 	mddev->thread = NULL;
-	shrink_stripes(conf);
-	kfree(conf->stripe_hashtbl);
 	mddev->queue->backing_dev_info.congested_fn = NULL;
 	blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
 	sysfs_remove_group(&mddev->kobj, &raid5_attrs_group);
-	kfree(conf->disks);
-	kfree(conf);
+	free_conf(conf);
 	mddev->private = NULL;
 	return 0;
 }

@@ -2680,6 +2680,7 @@ level_store(mddev_t *mddev, const char *
 	ssize_t rv = len;
 	struct mdk_personality *pers;
 	void *priv;
+	mdk_rdev_t *rdev;
 
 	if (mddev->pers == NULL) {
 		if (len == 0)

@@ -2759,6 +2760,12 @@ level_store(mddev_t *mddev, const char *
 	mddev_suspend(mddev);
 	mddev->pers->stop(mddev);
 	module_put(mddev->pers->owner);
+	/* Invalidate devices that are now superfluous */
+	list_for_each_entry(rdev, &mddev->disks, same_set)
+		if (rdev->raid_disk >= mddev->raid_disks) {
+			rdev->raid_disk = -1;
+			clear_bit(In_sync, &rdev->flags);
+		}
 	mddev->pers = pers;
 	mddev->private = priv;
 	strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));

@@ -830,6 +830,24 @@ static int ide_port_setup_devices(ide_hw
 	return j;
 }
 
+static void ide_host_enable_irqs(struct ide_host *host)
+{
+	ide_hwif_t *hwif;
+	int i;
+
+	ide_host_for_each_port(i, hwif, host) {
+		if (hwif == NULL)
+			continue;
+
+		/* clear any pending IRQs */
+		hwif->tp_ops->read_status(hwif);
+
+		/* unmask IRQs */
+		if (hwif->io_ports.ctl_addr)
+			hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
+	}
+}
+
 /*
  * This routine sets up the IRQ for an IDE interface.
  */

@@ -843,9 +861,6 @@ static int init_irq (ide_hwif_t *hwif)
 	if (irq_handler == NULL)
 		irq_handler = ide_intr;
 
-	if (io_ports->ctl_addr)
-		hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-
 	if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
 		goto out_up;
 

@@ -1389,6 +1404,8 @@ int ide_host_register(struct ide_host *h
 			ide_port_tune_devices(hwif);
 	}
 
+	ide_host_enable_irqs(host);
+
 	ide_host_for_each_port(i, hwif, host) {
 		if (hwif == NULL)
 			continue;

@@ -362,9 +362,6 @@ static int ide_tune_dma(ide_drive_t *dri
 	if (__ide_dma_bad_drive(drive))
 		return 0;
 
-	if (ide_id_dma_bug(drive))
-		return 0;
-
 	if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
 		return config_drive_for_dma(drive);
 

@@ -395,24 +392,6 @@ static int ide_dma_check(ide_drive_t *dr
 	return -1;
 }
 
-int ide_id_dma_bug(ide_drive_t *drive)
-{
-	u16 *id = drive->id;
-
-	if (id[ATA_ID_FIELD_VALID] & 4) {
-		if ((id[ATA_ID_UDMA_MODES] >> 8) &&
-		    (id[ATA_ID_MWDMA_MODES] >> 8))
-			goto err_out;
-	} else if ((id[ATA_ID_MWDMA_MODES] >> 8) &&
-		   (id[ATA_ID_SWDMA_MODES] >> 8))
-		goto err_out;
-
-	return 0;
-err_out:
-	printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name);
-	return 1;
-}
-
 int ide_set_dma(ide_drive_t *drive)
 {
 	int rc;

@@ -306,9 +306,6 @@ int ide_driveid_update(ide_drive_t *driv
 
 	kfree(id);
 
-	if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive))
-		ide_dma_off(drive);
-
 	return 1;
 out_err:
 	SELECT_MASK(drive, 0);

@@ -1384,7 +1384,6 @@ int ide_in_drive_list(u16 *, const struc
 #ifdef CONFIG_BLK_DEV_IDEDMA
 int ide_dma_good_drive(ide_drive_t *);
 int __ide_dma_bad_drive(ide_drive_t *);
-int ide_id_dma_bug(ide_drive_t *);
 
 u8 ide_find_dma_mode(ide_drive_t *, u8);
 

@@ -1425,7 +1424,6 @@ void ide_dma_lost_irq(ide_drive_t *);
 ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
 
 #else
-static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }

@@ -593,7 +593,11 @@ static int atk_add_sensor(struct atk_dat
 	sensor->data = data;
 	sensor->id = flags->integer.value;
 	sensor->limit1 = limit1->integer.value;
-	sensor->limit2 = limit2->integer.value;
+	if (data->old_interface)
+		sensor->limit2 = limit2->integer.value;
+	else
+		/* The upper limit is expressed as delta from lower limit */
+		sensor->limit2 = sensor->limit1 + limit2->integer.value;
 
 	snprintf(sensor->input_attr_name, ATTR_NAME_SIZE,
 			"%s%d_input", base_name, start + *num);

@@ -86,6 +86,7 @@ superio_exit(void)
 #define SUPERIO_REG_ACT		0x30
 #define SUPERIO_REG_BASE	0x60
 #define SUPERIO_REG_DEVID	0x20
+#define SUPERIO_REG_DEVREV	0x21
 
 /* Logical device registers */
 

@@ -429,6 +430,9 @@ static int __init smsc47m1_find(unsigned
 	 * The LPC47M292 (device id 0x6B) is somewhat compatible, but it
 	 * supports a 3rd fan, and the pin configuration registers are
 	 * unfortunately different.
+	 * The LPC47M233 has the same device id (0x6B) but is not compatible.
+	 * We check the high bit of the device revision register to
+	 * differentiate them.
 	 */
 	switch (val) {
 	case 0x51:

@@ -448,6 +452,13 @@ static int __init smsc47m1_find(unsigned
 		sio_data->type = smsc47m1;
 		break;
 	case 0x6B:
+		if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) {
+			pr_debug(DRVNAME ": "
+				 "Found SMSC LPC47M233, unsupported\n");
+			superio_exit();
+			return -ENODEV;
+		}
+
 		pr_info(DRVNAME ": Found SMSC LPC47M292\n");
 		sio_data->type = smsc47m2;
 		break;

@@ -27,7 +27,7 @@
 #include <linux/delay.h>
 
 #define TSL2550_DRV_NAME	"tsl2550"
-#define DRIVER_VERSION		"1.1.1"
+#define DRIVER_VERSION		"1.1.2"
 
 /*
  * Defines

@@ -189,13 +189,16 @@ static int tsl2550_calculate_lux(u8 ch0, u8 ch1)
 	u8 r = 128;
 
 	/* Avoid division by 0 and count 1 cannot be greater than count 0 */
-	if (c0 && (c1 <= c0))
-		r = c1 * 128 / c0;
+	if (c1 <= c0)
+		if (c0) {
+			r = c1 * 128 / c0;
+
+			/* Calculate LUX */
+			lux = ((c0 - c1) * ratio_lut[r]) / 256;
+		} else
+			lux = 0;
 	else
-		return -1;
-
-	/* Calculate LUX */
-	lux = ((c0 - c1) * ratio_lut[r]) / 256;
+		return -EAGAIN;
 
 	/* LUX range check */
 	return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;

@@ -190,6 +190,12 @@ struct sbp2_target {
 #define SBP2_CYCLE_LIMIT		(0xc8 << 12)	/* 200 125us cycles */
 
 /*
+ * There is no transport protocol limit to the CDB length,  but we implement
+ * a fixed length only.  16 bytes is enough for disks larger than 2 TB.
+ */
+#define SBP2_MAX_CDB_SIZE		16
+
+/*
  * The default maximum s/g segment size of a FireWire controller is
  * usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to
  * be quadlet-aligned, we set the length limit to 0xffff & ~3.

@@ -301,7 +307,7 @@ struct sbp2_command_orb {
 		struct sbp2_pointer next;
 		struct sbp2_pointer data_descriptor;
 		__be32 misc;
-		u8 command_block[12];
+		u8 command_block[SBP2_MAX_CDB_SIZE];
 	} request;
 	struct scsi_cmnd *cmd;
 	scsi_done_fn_t done;

@@ -1135,6 +1141,8 @@ static int sbp2_probe(struct device *dev
 	if (fw_device_enable_phys_dma(device) < 0)
 		goto fail_shost_put;
 
+	shost->max_cmd_len = SBP2_MAX_CDB_SIZE;
+
 	if (scsi_add_host(shost, &unit->device) < 0)
 		goto fail_shost_put;
 

@@ -880,6 +880,7 @@ static struct sbp2_lu *sbp2_alloc_device
 	}
 
 	shost->hostdata[0] = (unsigned long)lu;
+	shost->max_cmd_len = SBP2_MAX_CDB_SIZE;
 
 	if (!scsi_add_host(shost, &ud->device)) {
 		lu->shost = shost;

@@ -25,6 +25,12 @@
 #define SBP2_DEVICE_NAME		"sbp2"
 
 /*
+ * There is no transport protocol limit to the CDB length,  but we implement
+ * a fixed length only.  16 bytes is enough for disks larger than 2 TB.
+ */
+#define SBP2_MAX_CDB_SIZE		16
+
+/*
  * SBP-2 specific definitions
  */
 

@@ -51,7 +57,7 @@ struct sbp2_command_orb {
 	u32 data_descriptor_hi;
 	u32 data_descriptor_lo;
 	u32 misc;
-	u8 cdb[12];
+	u8 cdb[SBP2_MAX_CDB_SIZE];
 } __attribute__((packed));
 
 #define SBP2_LOGIN_REQUEST		0x0

@@ -271,7 +271,7 @@ static int atl1c_set_wol(struct net_devi
 	struct atl1c_adapter *adapter = netdev_priv(netdev);
 
 	if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE |
-			    WAKE_MCAST | WAKE_BCAST | WAKE_MCAST))
+			    WAKE_UCAST | WAKE_BCAST | WAKE_MCAST))
 		return -EOPNOTSUPP;
 	/* these settings will always override what we currently have */
 	adapter->wol = 0;

@@ -188,14 +188,14 @@ struct atl1c_tpd_ext_desc {
 #define RRS_HDS_TYPE_DATA	2
 
 #define RRS_IS_NO_HDS_TYPE(flag) \
-	(((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == 0)
+	((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == 0)
 
 #define RRS_IS_HDS_HEAD(flag) \
-	(((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+	((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == \
 			RRS_HDS_TYPE_HEAD)
 
 #define RRS_IS_HDS_DATA(flag) \
-	(((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+	((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == \
 			RRS_HDS_TYPE_DATA)
 
 /* rrs word 3 bit 0:31 */

@@ -245,7 +245,7 @@ struct atl1c_tpd_ext_desc {
 #define RRS_PACKET_TYPE_802_3  	1
 #define RRS_PACKET_TYPE_ETH	0
 #define RRS_PACKET_IS_ETH(word) \
-	(((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK == \
+	((((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK) == \
 			RRS_PACKET_TYPE_ETH)
 #define RRS_RXD_IS_VALID(word) \
 	((((word) >> RRS_RXD_UPDATED_SHIFT) & RRS_RXD_UPDATED_MASK) == 1)

@@ -1701,7 +1701,7 @@ static void atl1c_clean_rx_irq(struct at
 		if (likely(RRS_RXD_IS_VALID(rrs->word3))) {
 			rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) &
 				RRS_RX_RFD_CNT_MASK;
-			if (unlikely(rfd_num) != 1)
+			if (unlikely(rfd_num != 1))
 				/* TODO support mul rfd*/
 				if (netif_msg_rx_err(adapter))
 					dev_warn(&pdev->dev,

@@ -1410,8 +1410,14 @@ static void super_1_sync(mddev_t *mddev,
 		if (rdev2->desc_nr+1 > max_dev)
 			max_dev = rdev2->desc_nr+1;
 
-	if (max_dev > le32_to_cpu(sb->max_dev))
+	if (max_dev > le32_to_cpu(sb->max_dev)) {
+		int bmask;
 		sb->max_dev = cpu_to_le32(max_dev);
+		rdev->sb_size = max_dev * 2 + 256;
+		bmask = queue_hardsect_size(rdev->bdev->bd_disk->queue)-1;
+		if (rdev->sb_size & bmask)
+			rdev->sb_size = (rdev->sb_size | bmask) + 1;
+	}
 	for (i=0; i<max_dev;i++)
 		sb->dev_roles[i] = cpu_to_le16(0xfffe);
 	

@@ -568,18 +568,18 @@ void mm_release(struct task_struct *tsk,
 	 * the value intact in a core dump, and to save the unnecessary
 	 * trouble otherwise.  Userland only wants this done for a sys_exit.
 	 */
-	if (tsk->clear_child_tid
-	    && !(tsk->flags & PF_SIGNALED)
-	    && atomic_read(&mm->mm_users) > 1) {
-		u32 __user * tidptr = tsk->clear_child_tid;
+	if (tsk->clear_child_tid) {
+		if (!(tsk->flags & PF_SIGNALED) &&
+		    atomic_read(&mm->mm_users) > 1) {
+			/*
+			 * We don't check the error code - if userspace has
+			 * not set up a proper pointer then tough luck.
+			 */
+			put_user(0, tsk->clear_child_tid);
+			sys_futex(tsk->clear_child_tid, FUTEX_WAKE,
+					1, NULL, NULL, 0);
+		}
 		tsk->clear_child_tid = NULL;
-
-		/*
-		 * We don't check the error code - if userspace has
-		 * not set up a proper pointer then tough luck.
-		 */
-		put_user(0, tidptr);
-		sys_futex(tidptr, FUTEX_WAKE, 1, NULL, NULL, 0);
 	}
 }
 

@@ -828,15 +828,22 @@ static int load_flat_shared_library(int 
 	if (IS_ERR(bprm.file))
 		return res;
 
+	bprm.cred = prepare_exec_creds();
+	res = -ENOMEM;
+	if (!bprm.cred)
+		goto out;
+
 	res = prepare_binprm(&bprm);
 
 	if (res <= (unsigned long)-4096)
 		res = load_flat_file(&bprm, libs, id, NULL);
-	if (bprm.file) {
-		allow_write_access(bprm.file);
-		fput(bprm.file);
-		bprm.file = NULL;
-	}
+
+	abort_creds(bprm.cred);
+
+out:
+	allow_write_access(bprm.file);
+	fput(bprm.file);
+
 	return(res);
 }
 

@@ -1915,6 +1915,7 @@ COMPATIBLE_IOCTL(FIONCLEX)
 COMPATIBLE_IOCTL(FIOASYNC)
 COMPATIBLE_IOCTL(FIONBIO)
 COMPATIBLE_IOCTL(FIONREAD)  /* This is also TIOCINQ */
+COMPATIBLE_IOCTL(FS_IOC_FIEMAP)
 /* 0x00 */
 COMPATIBLE_IOCTL(FIBMAP)
 COMPATIBLE_IOCTL(FIGETBSZ)

@@ -57,7 +57,7 @@ hotplug_cfd(struct notifier_block *nfb, 
 			return NOTIFY_BAD;
 		break;
 
-#ifdef CONFIG_CPU_HOTPLUG
+#ifdef CONFIG_HOTPLUG_CPU
 	case CPU_UP_CANCELED:
 	case CPU_UP_CANCELED_FROZEN:
 

@@ -265,7 +265,7 @@ INT MlmeThread(
 	 */
 	DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__func__));
 
-	pObj->MLMEThr_task = NULL;
+	pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
 
 	complete_and_exit (&pAd->mlmeComplete, 0);
 	return 0;

@@ -373,7 +373,7 @@ INT RTUSBCmdThread(
 	 */
 	DBGPRINT(RT_DEBUG_TRACE,( "<---RTUSBCmdThread\n"));
 
-	pObj->RTUSBCmdThr_task = NULL;
+	pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
 
 	complete_and_exit (&pAd->CmdQComplete, 0);
 	return 0;

@@ -467,7 +467,7 @@ INT TimerQThread(
 	 */
 	DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__func__));
 
-	pObj->TimerQThr_task = NULL;
+	pObj->TimerQThr_pid = THREAD_PID_INIT_VALUE;
 
 	complete_and_exit(&pAd->TimerQComplete, 0);
 	return 0;

@@ -944,46 +944,69 @@ VOID RT28xxThreadTerminate(
 	RTUSBCancelPendingIRPs(pAd);
 
 	// Terminate Threads
-	BUG_ON(pObj->TimerQThr_task == NULL);
-	CHECK_PID_LEGALITY(task_pid(pObj->TimerQThr_task))
+	CHECK_PID_LEGALITY(pObj->TimerQThr_pid)
 	{
 		POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
 
-		printk(KERN_DEBUG "Terminate the TimerQThr pid=%d!\n",
-			pid_nr(task_pid(pObj->TimerQThr_task)));
+		printk("Terminate the TimerQThr_pid=%d!\n", GET_PID_NUMBER(pObj->TimerQThr_pid));
 		mb();
 		pAd->TimerFunc_kill = 1;
 		mb();
-		kthread_stop(pObj->TimerQThr_task);
-		pObj->TimerQThr_task = NULL;
+		ret = KILL_THREAD_PID(pObj->TimerQThr_pid, SIGTERM, 1);
+		if (ret)
+		{
+			printk(KERN_WARNING "%s: unable to stop TimerQThread, pid=%d, ret=%d!\n",
+					pAd->net_dev->name, GET_PID_NUMBER(pObj->TimerQThr_pid), ret);
+		}
+		else
+		{
+			wait_for_completion(&pAd->TimerQComplete);
+			pObj->TimerQThr_pid = THREAD_PID_INIT_VALUE;
+		}
 	}
 
-	BUG_ON(pObj->MLMEThr_task == NULL);
-	CHECK_PID_LEGALITY(task_pid(pObj->MLMEThr_task))
+	CHECK_PID_LEGALITY(pObj->MLMEThr_pid)
 	{
-		printk(KERN_DEBUG "Terminate the MLMEThr pid=%d!\n",
-			pid_nr(task_pid(pObj->MLMEThr_task)));
+		printk("Terminate the MLMEThr_pid=%d!\n", GET_PID_NUMBER(pObj->MLMEThr_pid));
 		mb();
 		pAd->mlme_kill = 1;
 		//RT28XX_MLME_HANDLER(pAd);
 		mb();
-		kthread_stop(pObj->MLMEThr_task);
-		pObj->MLMEThr_task = NULL;
+		ret = KILL_THREAD_PID(pObj->MLMEThr_pid, SIGTERM, 1);
+		if (ret)
+		{
+			printk (KERN_WARNING "%s: unable to Mlme thread, pid=%d, ret=%d!\n",
+					pAd->net_dev->name, GET_PID_NUMBER(pObj->MLMEThr_pid), ret);
+		}
+		else
+		{
+			//wait_for_completion (&pAd->notify);
+			wait_for_completion (&pAd->mlmeComplete);
+			pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
+		}
 	}
 
-	BUG_ON(pObj->RTUSBCmdThr_task == NULL);
-	CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))
+	CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid)
 	{
-		printk(KERN_DEBUG "Terminate the RTUSBCmdThr pid=%d!\n",
-			pid_nr(task_pid(pObj->RTUSBCmdThr_task)));
+		printk("Terminate the RTUSBCmdThr_pid=%d!\n", GET_PID_NUMBER(pObj->RTUSBCmdThr_pid));
 		mb();
 		NdisAcquireSpinLock(&pAd->CmdQLock);
 		pAd->CmdQ.CmdQState = RT2870_THREAD_STOPED;
 		NdisReleaseSpinLock(&pAd->CmdQLock);
 		mb();
 		//RTUSBCMDUp(pAd);
-		kthread_stop(pObj->RTUSBCmdThr_task);
-		pObj->RTUSBCmdThr_task = NULL;
+		ret = KILL_THREAD_PID(pObj->RTUSBCmdThr_pid, SIGTERM, 1);
+		if (ret)
+		{
+			printk(KERN_WARNING "%s: unable to RTUSBCmd thread, pid=%d, ret=%d!\n",
+					pAd->net_dev->name, GET_PID_NUMBER(pObj->RTUSBCmdThr_pid), ret);
+		}
+		else
+		{
+			//wait_for_completion (&pAd->notify);
+			wait_for_completion (&pAd->CmdQComplete);
+			pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
+	}
 	}
 
 

@@ -1044,7 +1067,7 @@ BOOLEAN RT28XXChipsetCheck(
 		if (dev_p->descriptor.idVendor == rtusb_usb_id[i].idVendor &&
 			dev_p->descriptor.idProduct == rtusb_usb_id[i].idProduct)
 		{
-			printk(KERN_DEBUG "rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
+			printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
 					dev_p->descriptor.idVendor, dev_p->descriptor.idProduct);
 			break;
 		}

@@ -727,8 +727,8 @@ NDIS_STATUS AdapterBlockAllocateMemory(
 
 	usb_dev = pObj->pUsb_Dev;
 
-	pObj->MLMEThr_task		= NULL;
-	pObj->RTUSBCmdThr_task	= NULL;
+	pObj->MLMEThr_pid		= THREAD_PID_INIT_VALUE;
+	pObj->RTUSBCmdThr_pid	= THREAD_PID_INIT_VALUE;
 
 	*ppAd = (PVOID)vmalloc(sizeof(RTMP_ADAPTER));
 

@@ -765,7 +765,7 @@ NDIS_STATUS	 CreateThreads(
 {
 	PRTMP_ADAPTER pAd = net_dev->ml_priv;
 	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
-	struct task_struct *tsk;
+	pid_t pid_number = -1;
 
 	//init_MUTEX(&(pAd->usbdev_semaphore));
 

@@ -779,39 +779,36 @@ NDIS_STATUS	 CreateThreads(
 	init_completion (&pAd->TimerQComplete);
 
 	// Creat MLME Thread
-	pObj->MLMEThr_task = NULL;
-	tsk = kthread_run(MlmeThread, pAd, pAd->net_dev->name);
-
-	if (IS_ERR(tsk)) {
+	pObj->MLMEThr_pid= THREAD_PID_INIT_VALUE;
+	pid_number = kernel_thread(MlmeThread, pAd, CLONE_VM);
+	if (pid_number < 0)
+	{
 		printk (KERN_WARNING "%s: unable to start Mlme thread\n",pAd->net_dev->name);
 		return NDIS_STATUS_FAILURE;
 	}
-
-	pObj->MLMEThr_task = tsk;
+	pObj->MLMEThr_pid = GET_PID(pid_number);
 	// Wait for the thread to start
 	wait_for_completion(&(pAd->mlmeComplete));
 
 	// Creat Command Thread
-	pObj->RTUSBCmdThr_task = NULL;
-	tsk = kthread_run(RTUSBCmdThread, pAd, pAd->net_dev->name);
-
-	if (IS_ERR(tsk) < 0)
+	pObj->RTUSBCmdThr_pid= THREAD_PID_INIT_VALUE;
+	pid_number = kernel_thread(RTUSBCmdThread, pAd, CLONE_VM);
+	if (pid_number < 0)
 	{
 		printk (KERN_WARNING "%s: unable to start RTUSBCmd thread\n",pAd->net_dev->name);
 		return NDIS_STATUS_FAILURE;
 	}
-
-	pObj->RTUSBCmdThr_task = tsk;
+	pObj->RTUSBCmdThr_pid = GET_PID(pid_number);
 	wait_for_completion(&(pAd->CmdQComplete));
 
-	pObj->TimerQThr_task = NULL;
-	tsk = kthread_run(TimerQThread, pAd, pAd->net_dev->name);
-	if (IS_ERR(tsk) < 0)
+	pObj->TimerQThr_pid= THREAD_PID_INIT_VALUE;
+	pid_number = kernel_thread(TimerQThread, pAd, CLONE_VM);
+	if (pid_number < 0)
 	{
 		printk (KERN_WARNING "%s: unable to start TimerQThread\n",pAd->net_dev->name);
 		return NDIS_STATUS_FAILURE;
 	}
-	pObj->TimerQThr_task = tsk;
+	pObj->TimerQThr_pid = GET_PID(pid_number);
 	// Wait for the thread to start
 	wait_for_completion(&(pAd->TimerQComplete));