Update the mtd driver name in bootargs for at91-based boards

PATCH New Albin Tonnerre 3 participants 10 messages Jul 22, 2009 – Aug 17, 2009 Arm/Microchip (AT91) SoC support

Share & tools

Albin Tonnerre

author

2009-07-22 16:30 UTC #0 lore raw

PATCH 1/1 Update the mtd driver name in bootargs for at91-based boards

The name of the atmel nand driver in the kernel changed from at91_nand to atmel_nand back in June 2008, but the at91-based boards config files still refer to at91_nand. This patch updates them with the new name

Signed-off-by Albin Tonnerre <[email protected]>

---
 include/configs/at91cap9adk.h      |    4 ++--
 include/configs/at91sam9260ek.h    |    6 +++---
 include/configs/at91sam9261ek.h    |    6 +++---
 include/configs/at91sam9263ek.h    |    4 ++--
 include/configs/at91sam9m10g45ek.h |    4 ++--
 include/configs/at91sam9rlek.h     |    4 ++--
 include/configs/pm9261.h           |    4 ++--
 include/configs/pm9263.h           |    4 ++--
 8 files changed, 18 insertions(+), 18 deletions(-)

include/configs/at91cap9adk.h +2 -2

index 0ef3554..cc194d8 100644
@@ -172,7 +172,7 @@
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock1 "			\
 				"mtdparts=physmap-flash.0:-(nor);"	\
-				"at91_nand:-(root) "			\
+				"atmel_nand:-(root) "			\
 				"rw rootfstype=jffs2"
 
 #else

@@ -188,7 +188,7 @@
 				"root=/dev/mtdblock4 "			\
 				"mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
 				"16k(env),224k(uboot)ro,-(linux);"	\
-				"at91_nand:-(root) "			\
+				"atmel_nand:-(root) "			\
 				"rw rootfstype=jffs2"
 
 #endif

include/configs/at91sam9260ek.h +3 -3

index 6cee593..3507de2 100644
@@ -163,7 +163,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #elif CONFIG_SYS_USE_DATAFLASH_CS1

@@ -177,7 +177,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */

@@ -190,7 +190,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock5 "			\
-				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"mtdparts=atmel_nand:128k(bootstrap)ro,"	\
 				"256k(uboot)ro,128k(env1)ro,"		\
 				"128k(env2)ro,2M(linux),-(root) "	\
 				"rw rootfstype=jffs2"

include/configs/at91sam9261ek.h +3 -3

index 3d108ab..f86698f 100644
@@ -181,7 +181,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #elif CONFIG_SYS_USE_DATAFLASH_CS3

@@ -195,7 +195,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */

@@ -208,7 +208,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock5 "			\
-				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"mtdparts=atmel_nand:128k(bootstrap)ro,"	\
 				"256k(uboot)ro,128k(env1)ro,"		\
 				"128k(env2)ro,2M(linux),-(root) "	\
 				"rw rootfstype=jffs2"

include/configs/at91sam9263ek.h +2 -2

index 32f3f62..a1582fc 100644
@@ -304,7 +304,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #elif CONFIG_SYS_USE_NANDFLASH

@@ -317,7 +317,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock5 " \
-				"mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+				"mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
 				"rw rootfstype=jffs2"
 
 #endif

include/configs/at91sam9m10g45ek.h +2 -2

index 4b46c31..b460188 100644
@@ -179,7 +179,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */

@@ -192,7 +192,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x72000000 0x200000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock5 " \
-				"mtdparts=at91_nand:128k(bootstrap)ro, \
+				"mtdparts=atmel_nand:128k(bootstrap)ro, \
 				256k(uboot)ro,128k(env1)ro,128k(env2)ro, \
 				2M(linux),-(root) " \
 				"rw rootfstype=jffs2"

include/configs/at91sam9rlek.h +2 -2

index 9167304..b83266d 100644
@@ -142,7 +142,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */

@@ -155,7 +155,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock5 " \
-				"mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+				"mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
 				"rw rootfstype=jffs2"
 
 #endif

include/configs/pm9261.h +2 -2

index 203a14c..9bf49ba 100644
@@ -289,7 +289,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */

@@ -302,7 +302,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock5 "			\
-				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"mtdparts=atmel_nand:128k(bootstrap)ro,"	\
 				"256k(uboot)ro,128k(env1)ro,"		\
 				"128k(env2)ro,2M(linux),-(root) "	\
 				"rw rootfstype=jffs2"

include/configs/pm9263.h +2 -2

index a6ff28c..6761c18 100644
@@ -310,7 +310,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */

@@ -323,7 +323,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "		\
 				"root=/dev/mtdblock5 "		\
-				"mtdparts=at91_nand:"		\
+				"mtdparts=atmel_nand:"		\
 					"128k(bootstrap)ro,"	\
 					"256k(uboot)ro,"	\
 					"128k(env1)ro,"		\

Signature · 1 line

1.6.0.4

Albin Tonnerre

author

2009-07-31 15:40 UTC #1 lore raw

PATCH 1/1 Update the mtd driver name in bootargs for at91-based boards

Hi Wolfgang and Jean-Christophe,

Is this patch being left aside on purpose, or did it get under the radar ? I think it would be nice to have that fixed for the next release.

Regards,
Albin

Quoted 210 lines · Albin Tonnerre

Signed-off-by Albin Tonnerre <[email protected]>

---
 include/configs/at91cap9adk.h      |    4 ++--
 include/configs/at91sam9260ek.h    |    6 +++---
 include/configs/at91sam9261ek.h    |    6 +++---
 include/configs/at91sam9263ek.h    |    4 ++--
 include/configs/at91sam9m10g45ek.h |    4 ++--
 include/configs/at91sam9rlek.h     |    4 ++--
 include/configs/pm9261.h           |    4 ++--
 include/configs/pm9263.h           |    4 ++--
 8 files changed, 18 insertions(+), 18 deletions(-)

include/configs/at91cap9adk.h +2 -2

index 0ef3554..cc194d8 100644
@@ -172,7 +172,7 @@
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock1 "			\
 				"mtdparts=physmap-flash.0:-(nor);"	\
-				"at91_nand:-(root) "			\
+				"atmel_nand:-(root) "			\
 				"rw rootfstype=jffs2"
 
 #else

@@ -188,7 +188,7 @@
 				"root=/dev/mtdblock4 "			\
 				"mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
 				"16k(env),224k(uboot)ro,-(linux);"	\
-				"at91_nand:-(root) "			\
+				"atmel_nand:-(root) "			\
 				"rw rootfstype=jffs2"
 
 #endif

include/configs/at91sam9260ek.h +3 -3

index 6cee593..3507de2 100644
@@ -163,7 +163,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #elif CONFIG_SYS_USE_DATAFLASH_CS1

@@ -177,7 +177,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */

@@ -190,7 +190,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock5 "			\
-				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"mtdparts=atmel_nand:128k(bootstrap)ro,"	\
 				"256k(uboot)ro,128k(env1)ro,"		\
 				"128k(env2)ro,2M(linux),-(root) "	\
 				"rw rootfstype=jffs2"

include/configs/at91sam9261ek.h +3 -3

index 3d108ab..f86698f 100644
@@ -181,7 +181,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #elif CONFIG_SYS_USE_DATAFLASH_CS3

@@ -195,7 +195,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */

@@ -208,7 +208,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock5 "			\
-				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"mtdparts=atmel_nand:128k(bootstrap)ro,"	\
 				"256k(uboot)ro,128k(env1)ro,"		\
 				"128k(env2)ro,2M(linux),-(root) "	\
 				"rw rootfstype=jffs2"

include/configs/at91sam9263ek.h +2 -2

index 32f3f62..a1582fc 100644
@@ -304,7 +304,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #elif CONFIG_SYS_USE_NANDFLASH

@@ -317,7 +317,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock5 " \
-				"mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+				"mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
 				"rw rootfstype=jffs2"
 
 #endif

include/configs/at91sam9m10g45ek.h +2 -2

index 4b46c31..b460188 100644
@@ -179,7 +179,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */

@@ -192,7 +192,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x72000000 0x200000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock5 " \
-				"mtdparts=at91_nand:128k(bootstrap)ro, \
+				"mtdparts=atmel_nand:128k(bootstrap)ro, \
 				256k(uboot)ro,128k(env1)ro,128k(env2)ro, \
 				2M(linux),-(root) " \
 				"rw rootfstype=jffs2"

include/configs/at91sam9rlek.h +2 -2

index 9167304..b83266d 100644
@@ -142,7 +142,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */

@@ -155,7 +155,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock5 " \
-				"mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+				"mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
 				"rw rootfstype=jffs2"
 
 #endif

include/configs/pm9261.h +2 -2

index 203a14c..9bf49ba 100644
@@ -289,7 +289,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */

@@ -302,7 +302,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock5 "			\
-				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"mtdparts=atmel_nand:128k(bootstrap)ro,"	\
 				"256k(uboot)ro,128k(env1)ro,"		\
 				"128k(env2)ro,2M(linux),-(root) "	\
 				"rw rootfstype=jffs2"

include/configs/pm9263.h +2 -2

index a6ff28c..6761c18 100644
@@ -310,7 +310,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */

@@ -323,7 +323,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "		\
 				"root=/dev/mtdblock5 "		\
-				"mtdparts=at91_nand:"		\
+				"mtdparts=atmel_nand:"		\
 					"128k(bootstrap)ro,"	\
 					"256k(uboot)ro,"	\
 					"128k(env1)ro,"		\

Signature · 11 lines

Albin Tonnerre, Free Electrons
Kernel, drivers and embedded Linux development,
consulting, training and support.
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 835 bytes
Desc: Digital signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090731/9bae3cfd/attachment-0001.pgp

Jean-Christophe PLAGNIOL-VILLARD

2009-08-01 20:59 UTC #2 lore raw

PATCH 1/1 Update the mtd driver name in bootargs for at91-based boards

Quoted 4 lines · Albin Tonnerre

Hi Wolfgang and Jean-Christophe,
Is this patch being left aside on purpose, or did it get under the radar ? I think it would be nice to have that fixed for the next release.

I've not missed it but here each board Maintainer must ack it as the device nand depend on which kernel they work

Stelian, Ilko, Sedji, Patrice
any objection

Best Regards,
J.

Wolfgang Denk

2009-08-01 21:29 UTC #3 lore raw

PATCH 1/1 Update the mtd driver name in bootargs for at91-based boards

Dear Jean-Christophe PLAGNIOL-VILLARD,

Quoted 7 lines · In message <[email protected]> you wrote:

Quoted 4 lines · Albin Tonnerre
Hi Wolfgang and Jean-Christophe,
Is this patch being left aside on purpose, or did it get under the radar ? I think it would be nice to have that fixed for the next release.
I've not missed it but here each board Maintainer must ack it as the device nand depend on which kernel they work

History shows that such an approach is a pretty reliable method to delay the patch forever. I suggest to modify the procedure such that the patch gets applied if none of the board maintainers objects within a reasonable time (say, one week from now, which should be sufficient as the patch was posted already more than a week ago). This is especially so since the patch fixes a year old issue.

Thanks.

Best regards,

Wolfgang Denk

Signature · 4 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Memories of you remind me of you.                   - Karl Lehenbauer

Albin Tonnerre

author

2009-08-13 11:00 UTC #4 lore raw

PATCH 1/1 Update the mtd driver name in bootargs for at91-based boards

In reply to Jean-Christophe PLAGNIOL-VILLARD

Quoted 7 lines · Jean-Christophe PLAGNIOL-VILLARD

Quoted 4 lines · Albin Tonnerre
Hi Wolfgang and Jean-Christophe,
Is this patch being left aside on purpose, or did it get under the radar ? I think it would be nice to have that fixed for the next release.
I've not missed it but here each board Maintainer must ack it as the device nand depend on which kernel they work

Well, if the supported kernel for those boards still use at91_nand, I wonder to what extend it is a problem to set the supported u-boot version to 2009.06. After all, it is arguably way easier to maintain than a more-than-one-year-old kernel.

Regards,

Signature · 4 lines

Albin Tonnerre, Free Electrons
Kernel, drivers and embedded Linux development,
consulting, training and support.
http://free-electrons.com

Jean-Christophe PLAGNIOL-VILLARD

2009-08-14 07:02 UTC #5 lore raw

PATCH 1/1 Update the mtd driver name in bootargs for at91-based boards

Quoted 6 lines · Albin Tonnerre

Quoted 5 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 4 lines · Albin Tonnerre
Hi Wolfgang and Jean-Christophe,
Is this patch being left aside on purpose, or did it get under the radar ? I think it would be nice to have that fixed for the next release.

Quoted 7 lines

Quoted 2 lines
I've not missed it but here each board Maintainer must ack it as the device nand depend on which kernel they work
Well, if the supported kernel for those boards still use at91_nand, I wonder to what extend it is a problem to set the supported u-boot version to 2009.06. After all, it is arguably way easier to maintain than a more-than-one-year-old kernel.

I've receive a confirmation taht the pm9261 use a old kernel so nack for this one for the pm9263 ok and the Atmel ref board ditto

please update the patch and resend

Best Regards,
J.

Albin Tonnerre

author

2009-08-14 08:10 UTC #6 lore raw

PATCH v2 1/1 Update the mtd driver name in bootargs for at91-based boards

Signed-off-by Albin Tonnerre <[email protected]>

---
Changes:
- Don't change the driver name for the pm9261 board, as it uses an older kernel

 include/configs/at91cap9adk.h      |    4 ++--
 include/configs/at91sam9260ek.h    |    6 +++---
 include/configs/at91sam9261ek.h    |    6 +++---
 include/configs/at91sam9263ek.h    |    4 ++--
 include/configs/at91sam9m10g45ek.h |    4 ++--
 include/configs/at91sam9rlek.h     |    4 ++--
 include/configs/pm9263.h           |    4 ++--
 7 files changed, 16 insertions(+), 16 deletions(-)

include/configs/at91cap9adk.h +2 -2

index 0ef3554..cc194d8 100644
@@ -172,7 +172,7 @@
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock1 "			\
 				"mtdparts=physmap-flash.0:-(nor);"	\
-				"at91_nand:-(root) "			\
+				"atmel_nand:-(root) "			\
 				"rw rootfstype=jffs2"
 
 #else

@@ -188,7 +188,7 @@
 				"root=/dev/mtdblock4 "			\
 				"mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
 				"16k(env),224k(uboot)ro,-(linux);"	\
-				"at91_nand:-(root) "			\
+				"atmel_nand:-(root) "			\
 				"rw rootfstype=jffs2"
 
 #endif

include/configs/at91sam9260ek.h +3 -3

index 6cee593..3507de2 100644
@@ -163,7 +163,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #elif CONFIG_SYS_USE_DATAFLASH_CS1

@@ -177,7 +177,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */

@@ -190,7 +190,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock5 "			\
-				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"mtdparts=atmel_nand:128k(bootstrap)ro,"	\
 				"256k(uboot)ro,128k(env1)ro,"		\
 				"128k(env2)ro,2M(linux),-(root) "	\
 				"rw rootfstype=jffs2"

include/configs/at91sam9261ek.h +3 -3

index 3d108ab..f86698f 100644
@@ -181,7 +181,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #elif CONFIG_SYS_USE_DATAFLASH_CS3

@@ -195,7 +195,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xD0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock0 "			\
-				"mtdparts=at91_nand:-(root) "		\
+				"mtdparts=atmel_nand:-(root) "		\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */

@@ -208,7 +208,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
 				"root=/dev/mtdblock5 "			\
-				"mtdparts=at91_nand:128k(bootstrap)ro,"	\
+				"mtdparts=atmel_nand:128k(bootstrap)ro,"	\
 				"256k(uboot)ro,128k(env1)ro,"		\
 				"128k(env2)ro,2M(linux),-(root) "	\
 				"rw rootfstype=jffs2"

include/configs/at91sam9263ek.h +2 -2

index 32f3f62..a1582fc 100644
@@ -304,7 +304,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #elif CONFIG_SYS_USE_NANDFLASH

@@ -317,7 +317,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock5 " \
-				"mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+				"mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
 				"rw rootfstype=jffs2"
 
 #endif

include/configs/at91sam9m10g45ek.h +2 -2

index 4b46c31..b460188 100644
@@ -179,7 +179,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */

@@ -192,7 +192,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x72000000 0x200000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock5 " \
-				"mtdparts=at91_nand:128k(bootstrap)ro, \
+				"mtdparts=atmel_nand:128k(bootstrap)ro, \
 				256k(uboot)ro,128k(env1)ro,128k(env2)ro, \
 				2M(linux),-(root) " \
 				"rw rootfstype=jffs2"

include/configs/at91sam9rlek.h +2 -2

index 9167304..b83266d 100644
@@ -142,7 +142,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */

@@ -155,7 +155,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock5 " \
-				"mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+				"mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
 				"rw rootfstype=jffs2"
 
 #endif

include/configs/pm9263.h +2 -2

index a6ff28c..6761c18 100644
@@ -310,7 +310,7 @@
 #define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"root=/dev/mtdblock0 " \
-				"mtdparts=at91_nand:-(root) "\
+				"mtdparts=atmel_nand:-(root) "\
 				"rw rootfstype=jffs2"
 
 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */

@@ -323,7 +323,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 "		\
 				"root=/dev/mtdblock5 "		\
-				"mtdparts=at91_nand:"		\
+				"mtdparts=atmel_nand:"		\
 					"128k(bootstrap)ro,"	\
 					"256k(uboot)ro,"	\
 					"128k(env1)ro,"		\

Signature · 1 line

1.6.0.4

Jean-Christophe PLAGNIOL-VILLARD

2009-08-17 22:14 UTC #7 lore raw

PATCH 1/1 Update the mtd driver name in bootargs for at91-based boards

In reply to Albin Tonnerre

Quoted 5 lines · Albin Tonnerre

The name of the atmel nand driver in the kernel changed from at91_nand to atmel_nand back in June 2008, but the at91-based boards config files still refer to at91_nand. This patch updates them with the new name
Signed-off-by Albin Tonnerre <[email protected]>

Quoted 10 lines

---
 include/configs/at91cap9adk.h      |    4 ++--
 include/configs/at91sam9260ek.h    |    6 +++---
 include/configs/at91sam9261ek.h    |    6 +++---
 include/configs/at91sam9263ek.h    |    4 ++--
 include/configs/at91sam9m10g45ek.h |    4 ++--
 include/configs/at91sam9rlek.h     |    4 ++--
 include/configs/pm9261.h           |    4 ++--
 include/configs/pm9263.h           |    4 ++--
 8 files changed, 18 insertions(+), 18 deletions(-)

I've recive a ack for the pm9263 recently so I apply this version

Best Regards,
J.

Albin Tonnerre

author

2009-08-17 22:26 UTC #8 lore raw

PATCH 1/1 Update the mtd driver name in bootargs for at91-based boards

Quoted 1 line · Jean-Christophe PLAGNIOL-VILLARD

I've recive a ack for the pm9263 recently so I apply this version

Did you mean 9261 ? From your previous mail, I thought this was the one causing issues.

Regards,

Signature · 11 lines

Albin Tonnerre, Free Electrons
Kernel, drivers and embedded Linux development,
consulting, training and support.
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 835 bytes
Desc: Digital signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090818/9c28f350/attachment.pgp

Jean-Christophe PLAGNIOL-VILLARD

2009-08-17 22:46 UTC #9 lore raw

PATCH 1/1 Update the mtd driver name in bootargs for at91-based boards

Quoted 5 lines · Albin Tonnerre

Quoted 1 line · Jean-Christophe PLAGNIOL-VILLARD
I've recive a ack for the pm9263 recently so I apply this version
Did you mean 9261 ? From your previous mail, I thought this was the one causing issues.

yes a typo I've the ask for both

Best Regards,
J.