Skip to contentSkip to conversation

Backporting newer EDAC drivers to "stable" tree 2.6.27.x?

DISCUSSION Carsten Aulbert 2 participants 2 messages Aug 17, 2009

lore
Share & tools
lore
#0 lore raw

Hi there,

what is the recommended way to incorporate newer EDAC drivers from 2.6.30 or later into the long term 2.6.27.x series? Are there ongoing efforts already we could just re-use or does one "just" take the latest patchset and tries to apply it cleanly (enough) to the latest long term kernel?

Thanks a lot for any pointers/help

Cheers

Carsten

#1 lore raw

[ Adding Doug to CC. ]

Quoted 4 lines · Carsten Aulbert

what is the recommended way to incorporate newer EDAC drivers from 2.6.30 or later into the long term 2.6.27.x series? Are there ongoing efforts already we could just re-use or does one "just" take the latest patchset and tries to apply it cleanly (enough) to the latest long term kernel?

I've made an AMD64 EDAC backport for RHEL5.4 but since they're using a heavily patched 2.6.18, this'll be of little or no use for you so you might just as well slap the driver into .27 sources and fix it up.

There also might be the need to adjust some EDAC core stuff for which Doug has some patches at the svn repo at
http://bluesmoke.sourceforge.net/ but you'll have to do a bit of digging yourself :).

Signature · 8 lines
Regards/Gruss,
Boris.

Operating | Advanced Micro Devices GmbH
  System  | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
 Research | Geschäftsführer: Thomas M. McCoy, Giuliano Meroni
  Center  | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
  (OSRC)  | Registergericht München, HRB Nr. 43632