wl1251: correct definitions for 0th bit defines

ACX_SLV_SOFT_RESET_BIT and ACX_REG_EEPROM_START_BIT are both defined as "1" in the vendor driver code, but they were defined to be BIT(1) ("2") here.

The SOFT_RESET typo ensures that wl1251_boot_soft_reset() doesn't; as a result the device hangs when trying to reprogram the PLL registers while running.

---
 drivers/net/wireless/wl12xx/wl1251_reg.h |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

index 2de47cc..86a8666 100644
@@ -309,8 +309,8 @@ enum wl12xx_acx_int_reg {
 	ACX_REG_TABLE_LEN
 };
 
-#define ACX_SLV_SOFT_RESET_BIT   BIT(1)
-#define ACX_REG_EEPROM_START_BIT BIT(1)
+#define ACX_SLV_SOFT_RESET_BIT   BIT(0)
+#define ACX_REG_EEPROM_START_BIT BIT(0)
 
 /* Command/Information Mailbox Pointers */
 

1.6.2.5

-- 
Bob Copeland %% www.bobcopeland.com

My bad, thanks for fixing this.

Kalle Valo