ARM: DaVinci: Adding Support for DaVinci DM365 EVM
PATCH 1/1 ARM: DaVinci: Adding Support for DaVinci DM365 EVM
From: Sandeep Paulraj <[email protected]>
This patch adds support for the DM365 EVM.
It has been tested on a DM365 EVM.
--- Makefile | 3 + board/davinci/dm365evm/Makefile | 52 ++++++++++ board/davinci/dm365evm/config.mk | 11 ++ board/davinci/dm365evm/dm365evm.c | 60 ++++++++++++ include/configs/davinci_dm365evm.h | 182 ++++++++++++++++++++++++++++++++++++ 5 files changed, 308 insertions(+), 0 deletions(-) create mode 100644 board/davinci/dm365evm/Makefile create mode 100644 board/davinci/dm365evm/config.mk create mode 100644 board/davinci/dm365evm/dm365evm.c create mode 100644 include/configs/davinci_dm365evm.h
Makefile +3 -0
@@ -2879,6 +2879,9 @@ davinci_sonata_config : unconfig davinci_dm355evm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci +davinci_dm365evm_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci + lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
board/davinci/dm365evm/Makefile new file +52 -0
52 lines not on this page · raw message
board/davinci/dm365evm/config.mk new file +11 -0
@@ -0,0 +1,11 @@ +# +# Spectrum Digital DM365 EVM board +# DM365 EVM board has 1 bank of 128 MB DDR RAM +# Physical Address: 8000'0000 to 8800'0000 +# +# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0x81080000
board/davinci/dm365evm/dm365evm.c new file +60 -0
60 lines not on this page · raw message
include/configs/davinci_dm365evm.h new file +182 -0
182 lines not on this page · raw message
Signature · 1 line
1.6.0.4
PATCH 1/1 ARM: DaVinci: Adding Support for DaVinci DM365 EVM
Quoted 6 lines · s-paulraj at ti.com
From: Sandeep Paulraj <[email protected]>
This patch adds support for the DM365 EVM.
It has been tested on a DM365 EVM.Signed-off-by Sandeep Paulraj <[email protected]>
Quoted 11 lines
--- Makefile | 3 + board/davinci/dm365evm/Makefile | 52 ++++++++++ board/davinci/dm365evm/config.mk | 11 ++ board/davinci/dm365evm/dm365evm.c | 60 ++++++++++++ include/configs/davinci_dm365evm.h | 182 ++++++++++++++++++++++++++++++++++++ 5 files changed, 308 insertions(+), 0 deletions(-) create mode 100644 board/davinci/dm365evm/Makefile create mode 100644 board/davinci/dm365evm/config.mk create mode 100644 board/davinci/dm365evm/dm365evm.c create mode 100644 include/configs/davinci_dm365evm.h
apply to u-boot-arm next
Best Regards,
J.
PATCH 1/1 ARM: DaVinci: Adding Support for DaVinci DM365 EVM
Quoted 18 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 6 lines · s-paulraj at ti.com
From: Sandeep Paulraj <[email protected]>
This patch adds support for the DM365 EVM.
It has been tested on a DM365 EVM.Signed-off-by Sandeep Paulraj <[email protected]>Quoted 11 lines
--- Makefile | 3 + board/davinci/dm365evm/Makefile | 52 ++++++++++ board/davinci/dm365evm/config.mk | 11 ++ board/davinci/dm365evm/dm365evm.c | 60 ++++++++++++ include/configs/davinci_dm365evm.h | 182 ++++++++++++++++++++++++++++++++++++ 5 files changed, 308 insertions(+), 0 deletions(-) create mode 100644 board/davinci/dm365evm/Makefile create mode 100644 board/davinci/dm365evm/config.mk create mode 100644 board/davinci/dm365evm/dm365evm.c create mode 100644 include/configs/davinci_dm365evm.h
Quoted 1 line
apply to u-boot-arm next
I'll push it after Scott pull request as It's need to 4bit nand patch as dependancy
btw please thread them and number your patch to known the apply order
Best Regards,
J.