ALSA: cs5535audio: free OLPC quirks from reliance on MGEODE_LX cpu optimization

PATCH In review Andres Salomon 1 participant 1 message Aug 18, 2009

Subsystems (3)

x86 Sound CS5535 Audio ALSA driver

lore

Share & tools

lore

Andres Salomon

author

2009-08-18 21:53 UTC #0 lore raw

PATCH 3/3 ALSA: cs5535audio: free OLPC quirks from reliance on MGEODE_LX cpu optimization

Previously, OLPC support for the mic extensions was only enabled in the ALSA driver if CONFIG_OLPC and CONFIG_MGEODE_LX were both set. This was because the old geode GPIO code was written in a manner that assumed CONFIG_MGEODE_LX. With the new cs553x-gpio driver, this is no longer the case; as such, we can drop the requirement on CONFIG_MGEODE_LX and instead include a requirement on GPIOLIB.

We use the generic GPIO API rather than the cs553x-specific API.

Signed-off-by Andres Salomon <[email protected]>

---
 arch/x86/Kconfig                         |    1 +
 arch/x86/include/asm/olpc.h              |    2 +-
 sound/pci/cs5535audio/Makefile           |    2 --
 sound/pci/cs5535audio/cs5535audio.c      |    1 +
 sound/pci/cs5535audio/cs5535audio.h      |    4 +++-
 sound/pci/cs5535audio/cs5535audio_olpc.c |   26 +++++++++++++++++++-------
 6 files changed, 25 insertions(+), 11 deletions(-)

arch/x86/Kconfig +1 -0

index 13ffa5d..4bae2f8 100644
@@ -2022,6 +2022,7 @@ config GEODE_MFGPT_TIMER
 
 config OLPC
 	bool "One Laptop Per Child support"
+	select GPIOLIB
 	default n
 	---help---
 	  Add support for detecting the unique features of the OLPC

arch/x86/include/asm/olpc.h +1 -1

index 834a302..3a57385 100644
@@ -120,7 +120,7 @@ extern int olpc_ec_mask_unset(uint8_t bits);
 
 /* GPIO assignments */
 
-#define OLPC_GPIO_MIC_AC	geode_gpio(1)
+#define OLPC_GPIO_MIC_AC	1
 #define OLPC_GPIO_DCON_IRQ	geode_gpio(7)
 #define OLPC_GPIO_THRM_ALRM	geode_gpio(10)
 #define OLPC_GPIO_SMB_CLK	geode_gpio(14)

sound/pci/cs5535audio/Makefile +0 -2

index fda7a94..ccc6422 100644
@@ -4,9 +4,7 @@
 
 snd-cs5535audio-y := cs5535audio.o cs5535audio_pcm.o
 snd-cs5535audio-$(CONFIG_PM) += cs5535audio_pm.o
-ifdef CONFIG_MGEODE_LX
 snd-cs5535audio-$(CONFIG_OLPC) += cs5535audio_olpc.o
-endif
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o

sound/pci/cs5535audio/cs5535audio.c +1 -0

index 05f56e0..91e7faf 100644
@@ -389,6 +389,7 @@ probefail_out:
 
 static void __devexit snd_cs5535audio_remove(struct pci_dev *pci)
 {
+	olpc_quirks_cleanup();
 	snd_card_free(pci_get_drvdata(pci));
 	pci_set_drvdata(pci, NULL);
 }

sound/pci/cs5535audio/cs5535audio.h +3 -1

index 7a298ac..51966d7 100644
@@ -99,10 +99,11 @@ int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state);
 int snd_cs5535audio_resume(struct pci_dev *pci);
 #endif
 
-#if defined(CONFIG_OLPC) && defined(CONFIG_MGEODE_LX)
+#ifdef CONFIG_OLPC
 void __devinit olpc_prequirks(struct snd_card *card,
 		struct snd_ac97_template *ac97);
 int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97);
+void __devexit olpc_quirks_cleanup(void);
 void olpc_analog_input(struct snd_ac97 *ac97, int on);
 void olpc_mic_bias(struct snd_ac97 *ac97, int on);

@@ -128,6 +129,7 @@ static inline int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
 {
 	return 0;
 }
+static inline void olpc_quirks_cleanup(void) { }
 static inline void olpc_analog_input(struct snd_ac97 *ac97, int on) { }
 static inline void olpc_mic_bias(struct snd_ac97 *ac97, int on) { }
 static inline void olpc_capture_open(struct snd_ac97 *ac97) { }

sound/pci/cs5535audio/cs5535audio_olpc.c +19 -7

index 5c68143..50da49b 100644
@@ -13,10 +13,13 @@
 #include <sound/info.h>
 #include <sound/control.h>
 #include <sound/ac97_codec.h>
+#include <linux/gpio.h>
 
 #include <asm/olpc.h>
 #include "cs5535audio.h"
 
+#define DRV_NAME "cs5535audio-olpc"
+
 /*
  * OLPC has an additional feature on top of the regular AD1888 codec features.
  * It has an Analog Input mode that is switched into (after disabling the

@@ -38,10 +41,7 @@ void olpc_analog_input(struct snd_ac97 *ac97, int on)
 	}
 
 	/* set Analog Input through GPIO */
-	if (on)
-		geode_gpio_set(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
-	else
-		geode_gpio_clear(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
+	gpio_set_value(OLPC_GPIO_MIC_AC, on);
 }
 
 /*

@@ -73,8 +73,7 @@ static int olpc_dc_info(struct snd_kcontrol *kctl,
 
 static int olpc_dc_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v)
 {
-	v->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC,
-			GPIO_OUTPUT_VAL);
+	v->value.integer.value[0] = gpio_get_value(OLPC_GPIO_MIC_AC);
 	return 0;
 }

@@ -153,6 +152,12 @@ int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
 	if (!machine_is_olpc())
 		return 0;
 
+	if (gpio_request(OLPC_GPIO_MIC_AC, DRV_NAME)) {
+		printk(KERN_ERR DRV_NAME ": unable to allocate MIC GPIO\n");
+		return -EIO;
+	}
+	gpio_direction_output(OLPC_GPIO_MIC_AC, 0);
+
 	/* drop the original AD1888 HPF control */
 	memset(&elem, 0, sizeof(elem));
 	elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER;

@@ -169,11 +174,18 @@ int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
 	for (i = 0; i < ARRAY_SIZE(olpc_cs5535audio_ctls); i++) {
 		err = snd_ctl_add(card, snd_ctl_new1(&olpc_cs5535audio_ctls[i],
 				ac97->private_data));
-		if (err < 0)
+		if (err < 0) {
+			gpio_free(OLPC_GPIO_MIC_AC);
 			return err;
+		}
 	}
 
 	/* turn off the mic by default */
 	olpc_mic_bias(ac97, 0);
 	return 0;
 }
+
+void __devexit olpc_quirks_cleanup(void)
+{
+	gpio_free(OLPC_GPIO_MIC_AC);
+}

Signature · 1 line

1.6.3.3