spi_mpc8xxx: Add support for DMA transfers
v2 cover spi_mpc8xxx: Add support for DMA transfers
Hi all,
In v2:
- Fix build issues in fsl_qe_udc;
- Some minor cosmetic changes in "Add support for QE DMA mode and CPM1/CPM2 chips" patch.
David/Greg, could you Ack drivers/usb/gadget/fsl_qe_udc.h's changes in "[PATCH 4/8] powerpc/qe&cpm: Implement static inline stubs for non-QE/CPM builds", so we could merge that patch via powerpc tree?
Thanks!
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
PATCH v2 1/8 powerpc/cpm: Remove SPI defines and spi structs
When cpm2.h included into spi_mpc8xxx driver, the SPI defines in the header conflict with defines in the driver.
We don't need them in the header file, so remove them. Plus remove "struct spi", we'll use a better version in the driver.
--- arch/powerpc/include/asm/cpm1.h | 45 --------------------------------------- arch/powerpc/include/asm/cpm2.h | 39 --------------------------------- 2 files changed, 0 insertions(+), 84 deletions(-)
arch/powerpc/include/asm/cpm1.h +0 -45
@@ -478,51 +478,6 @@ typedef struct iic {char res2[2 ];/* Reserved */ } iic_t; -/* SPI parameter RAM. -*/ -typedef struct spi { -ushort spi_rbase;/* Rx Buffer descriptor base address */ -ushort spi_tbase;/* Tx Buffer descriptor base address */ -u_char spi_rfcr;/* Rx function code */ -u_char spi_tfcr;/* Tx function code */ -ushort spi_mrblr;/* Max receive buffer length */ -uint spi_rstate;/* Internal */ -uint spi_rdp;/* Internal */ -ushort spi_rbptr;/* Internal */ -ushort spi_rbc;/* Internal */ -uint spi_rxtmp;/* Internal */ -uint spi_tstate;/* Internal */ -uint spi_tdp;/* Internal */ -ushort spi_tbptr;/* Internal */ -ushort spi_tbc;/* Internal */ -uint spi_txtmp;/* Internal */ -uint spi_res; -ushort spi_rpbase;/* Relocation pointer */ -ushort spi_res2; -}spi_t ; - -/* SPI Mode register. -*/ -#define SPMODE_LOOP ((ushort)0x4000)/* Loopback */ -#define SPMODE_CI ((ushort)0x2000)/* Clock Invert */ -#define SPMODE_CP ((ushort)0x1000)/* Clock Phase */ -#define SPMODE_DIV16 ((ushort)0x0800)/* BRG/16 mode */ -#define SPMODE_REV ((ushort)0x0400)/* Reversed Data */ -#define SPMODE_MSTR ((ushort)0x0200)/* SPI Master */ -#define SPMODE_EN ((ushort)0x0100)/* Enable */ -#define SPMODE_LENMSK ((ushort)0x00f0)/* character length */ -#define SPMODE_LEN4 ((ushort)0x0030)/* 4 bits per char */ -#define SPMODE_LEN8 ((ushort)0x0070)/* 8 bits per char */ -#define SPMODE_LEN16 ((ushort)0x00f0)/* 16 bits per char */ -#define SPMODE_PMMSK ((ushort)0x000f)/* prescale modulus */ - -/* SPIE fields */ -#define SPIE_MME 0x20 -#define SPIE_TXE 0x10 -#define SPIE_BSY 0x04 -#define SPIE_TXB 0x02 -#define SPIE_RXB 0x01 -/* * RISC Controller Configuration Register definitons */
arch/powerpc/include/asm/cpm2.h +0 -39
@@ -654,45 +654,6 @@ typedef struct iic {uint iic_txtmp;/* Internal */ } iic_t; -/* SPI parameter RAM. -*/ -typedef struct spi { -ushort spi_rbase;/* Rx Buffer descriptor base address */ -ushort spi_tbase;/* Tx Buffer descriptor base address */ -u_char spi_rfcr;/* Rx function code */ -u_char spi_tfcr;/* Tx function code */ -ushort spi_mrblr;/* Max receive buffer length */ -uint spi_rstate;/* Internal */ -uint spi_rdp;/* Internal */ -ushort spi_rbptr;/* Internal */ -ushort spi_rbc;/* Internal */ -uint spi_rxtmp;/* Internal */ -uint spi_tstate;/* Internal */ -uint spi_tdp;/* Internal */ -ushort spi_tbptr;/* Internal */ -ushort spi_tbc;/* Internal */ -uint spi_txtmp;/* Internal */ -uint spi_res;/* Tx temp. */ -uint spi_res1[4 ];/* SDMA temp. */ -}spi_t ; - -/* SPI Mode register. -*/ -#define SPMODE_LOOP ((ushort)0x4000)/* Loopback */ -#define SPMODE_CI ((ushort)0x2000)/* Clock Invert */ -#define SPMODE_CP ((ushort)0x1000)/* Clock Phase */ -#define SPMODE_DIV16 ((ushort)0x0800)/* BRG/16 mode */ -#define SPMODE_REV ((ushort)0x0400)/* Reversed Data */ -#define SPMODE_MSTR ((ushort)0x0200)/* SPI Master */ -#define SPMODE_EN ((ushort)0x0100)/* Enable */ -#define SPMODE_LENMSK ((ushort)0x00f0)/* character length */ -#define SPMODE_PMMSK ((ushort)0x000f)/* prescale modulus */ - -#define SPMODE_LEN (x) ((((x)-1)&0xF)<<4) -#define SPMODE_PM (x) ((x) &0xF) - -#define SPI_EB ((u_char)0x10)/* big endian byte order */ -/* IDMA parameter RAM */ typedef struct idma {
Signature · 1 line
1.6.3.3
Kumar Gala
AppliedRe: [PATCH 1/8] powerpc/cpm: Remove SPI defines and spi structs
Quoted 6 lines · Anton Vorontsov
When
cpm2.hincluded intospi_mpc8xxxdriver, the SPI defines in the header conflict with defines in the driver.We don't need them in the header file, so remove them. Plus remove "struct spi", we'll use a better version in the driver.
Quoted 7 lines
Signed-off-by Anton Vorontsov <[email protected]>---
arch/powerpc/include/asm/cpm1.h| 45
---------------------------------------arch/powerpc/include/asm/cpm2.h| 39
---------------------------------2 files changed, 0 insertions(+), 84 deletions(-)
applied to next
- k
Re: [PATCH 1/8] powerpc/cpm: Remove SPI defines and spi structs
Quoted 17 lines · Kumar Gala
Quoted 6 lines · Anton Vorontsov
When
cpm2.hincluded intospi_mpc8xxxdriver, the SPI defines in the header conflict with defines in the driver.We don't need them in the header file, so remove them. Plus remove "struct spi", we'll use a better version in the driver.
Quoted 7 lines
Signed-off-by Anton Vorontsov <[email protected]>---
arch/powerpc/include/asm/cpm1.h| 45
---------------------------------------arch/powerpc/include/asm/cpm2.h| 39
---------------------------------2 files changed, 0 insertions(+), 84 deletions(-)
Quoted 1 line
applied to next
I can't find it in 2.6.32-rc1. Somehow it got lost from your next tree? The same for all powerpc patches from this series.
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
PATCH v2 2/8 powerpc/qe&cpm2: Avoid redefinitions in CPM2 and QE headers
In reply to Anton Vorontsovstruct mcc defined in both immap_qe.h and immap_cpm2.h, so they will conflic when included in a single file. The mcc struct is easy to deal with, since it isn't used in any driver (yet), so let's just rename QE version to qe_mcc.
The ucb_ctlr is a bit trickier, since it is used by fsl_qe_udc driver, and the driver supports both CPM and QE UDCs, plus the QE version is used to form a bigger immap struct.
I don't want to touch too much of USB code in this series, so for now let's just copy most generic version into the common cpm.h header, later we'll create cpm_usb.h where we'll place common USB structs that are used by QE/CPM UDC and QE Host drivers (FHCI).
And as for the structs in qe.h and cpm2.h, just prefix them with qe_ and cpm_.
--- arch/powerpc/include/asm/cpm.h | 22 ++++++++++++++++++++++ arch/powerpc/include/asm/immap_cpm2.h | 2 +- arch/powerpc/include/asm/immap_qe.h | 8 ++++---- 3 files changed, 27 insertions(+), 5 deletions(-)
arch/powerpc/include/asm/cpm.h +22 -0
@@ -5,6 +5,28 @@#include <linux/types.h> #include <linux/of.h> +/* +* USB Controller pram common to QE and CPM. +*/ +struct usb_ctlr { +u8 usb_usmod; +u8 usb_usadr; +u8 usb_uscom; +u8 res1[1 ]; +__be16 usb_usep[4 ]; +u8 res2[4 ]; +__be16 usb_usber; +u8 res3[2 ]; +__be16 usb_usbmr; +u8 res4[1 ]; +u8 usb_usbs; +/* Fields down below are QE-only */ +__be16 usb_ussft; +u8 res5[2 ]; +__be16 usb_usfrn; +u8 res6[0x22 ]; +} __attribute__ ((packed)); +/* Opcodes common to CPM1 and CPM2 */ #define CPM_CR_INIT_TRX ((ushort)0x0000)
arch/powerpc/include/asm/immap_cpm2.h +1 -1
@@ -549,7 +549,7 @@ typedef struct comm_proc {/* USB Controller. */ -typedef struct usb_ctlr { +typedef struct cpm_usb_ctlr { u8 usb_usmod; u8 usb_usadr; u8 usb_uscom;
arch/powerpc/include/asm/immap_qe.h +4 -4
@@ -210,7 +210,7 @@ struct sir { } __attribute__ ((packed));/* USB Controller */ -struct usb_ctlr { +struct qe_usb_ctlr {u8 usb_usmod;u8 usb_usadr;u8 usb_uscom;
@@ -229,7 +229,7 @@ struct usb_ctlr { } __attribute__ ((packed));/* MCC */ -struct mcc { +struct qe_mcc {__be32 mcce;/* MCC event register */ __be32 mccm;/* MCC mask register */ __be32 mccf;/* MCC configuration register */
@@ -431,9 +431,9 @@ struct qe_immap {struct qe_mux qmx;/* QE Multiplexer */ struct qe_timers qet;/* QE Timers */ struct spi spi[0x2 ];/* spi */ -struct mcc mcc;/* mcc */ +struct qe_mcc mcc;/* mcc */ struct qe_brg brg;/* brg */ -struct usb_ctlr usb;/* USB */ +struct qe_usb_ctlr usb;/* USB */ struct si1 si1;/* SI */ u8 res11[0x800 ];struct sir sir;/* SI Routing Tables */
Signature · 8 lines
1.6.3.3 ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july
Kumar Gala
AppliedRe: [PATCH 2/8] powerpc/qe&cpm2: Avoid redefinitions in CPM2 and QE headers
Quoted 17 lines · Anton Vorontsov
struct mcc defined in both
immap_qe.handimmap_cpm2.h, so they will conflic when included in a single file. The mcc struct is easy to deal with, since it isn't used in any driver (yet), so let's just rename QE version toqe_mcc.The
ucb_ctlris a bit trickier, since it is used byfsl_qe_udcdriver, and the driver supports both CPM and QE UDCs, plus the QE version is used to form a bigger immap struct.I don't want to touch too much of USB code in this series, so for now let's just copy most generic version into the common
cpm.hheader, later we'll createcpm_usb.hwhere we'll place common USB structs that are used by QE/CPM UDC and QE Host drivers (FHCI).And as for the structs in
qe.handcpm2.h, just prefix them withqe_andcpm_.
Quoted 6 lines
Signed-off-by Anton Vorontsov <[email protected]>---
arch/powerpc/include/asm/cpm.h | 22 ++++++++++++++++++++++ arch/powerpc/include/asm/immap_cpm2.h | 2 +- arch/powerpc/include/asm/immap_qe.h | 8 ++++---- 3 files changed, 27 insertions(+), 5 deletions(-)
applied to next
- k
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july
PATCH v2 3/8 powerpc/cpm: Move CPMFCR_* defines into cpm.h
In reply to Anton VorontsovThe bits are generic to CPM devices, so let's move them to the common header file, so drivers won't need to privately reintroduce another bunch of the same bits (as we can't include cpm2.h header together with cpm1.h).
--- arch/powerpc/include/asm/cpm.h | 16 ++++++++++++++++ arch/powerpc/include/asm/cpm2.h | 8 -------- 2 files changed, 16 insertions(+), 8 deletions(-)
arch/powerpc/include/asm/cpm.h +16 -0
@@ -27,6 +27,22 @@ struct usb_ctlr {u8 res6[0x22 ]; } __attribute__ ((packed)); +/* +* Function code bits, usually generic to devices. +*/ +#ifdef CONFIG_CPM1 +#define CPMFCR_GBL ((u_char)0x00)/* Flag doesn't exist in CPM1 */ +#define CPMFCR_TC2 ((u_char)0x00)/* Flag doesn't exist in CPM1 */ +#define CPMFCR_DTB ((u_char)0x00)/* Flag doesn't exist in CPM1 */ +#define CPMFCR_BDB ((u_char)0x00)/* Flag doesn't exist in CPM1 */ +#else +#define CPMFCR_GBL ((u_char)0x20)/* Set memory snooping */ +#define CPMFCR_TC2 ((u_char)0x04)/* Transfer code 2 value */ +#define CPMFCR_DTB ((u_char)0x02)/* Use local bus for data when set */ +#define CPMFCR_BDB ((u_char)0x01)/* Use local bus for BD when set */ +#endif +#define CPMFCR_EB ((u_char)0x10)/* Set big endian byte order */ +/* Opcodes common to CPM1 and CPM2 */ #define CPM_CR_INIT_TRX ((ushort)0x0000)
arch/powerpc/include/asm/cpm2.h +0 -8
@@ -124,14 +124,6 @@ static inline void cpm2_fastbrg(uint brg, uint rate, int div16)__cpm2_setbrg (brg, rate,CPM2_BRG_INT_CLK , div16,CPM_BRG_EXTC_INT ); } -/* Function code bits, usually generic to devices. -*/ -#define CPMFCR_GBL ((u_char)0x20)/* Set memory snooping */ -#define CPMFCR_EB ((u_char)0x10)/* Set big endian byte order */ -#define CPMFCR_TC2 ((u_char)0x04)/* Transfer code 2 value */ -#define CPMFCR_DTB ((u_char)0x02)/* Use local bus for data when set */ -#define CPMFCR_BDB ((u_char)0x01)/* Use local bus for BD when set */ -/* Parameter RAM offsets from the base. */ #define PROFF_SCC1 ((uint)0x8000)
Signature · 1 line
1.6.3.3
Kumar Gala
AppliedRe: [PATCH 3/8] powerpc/cpm: Move CPMFCR_* defines into cpm.h
Quoted 10 lines · Anton Vorontsov
The bits are generic to CPM devices, so let's move them to the common header file, so drivers won't need to privately reintroduce another bunch of the same bits (as we can't include
cpm2.hheader together withcpm1.h).Signed-off-by Anton Vorontsov <[email protected]>---
arch/powerpc/include/asm/cpm.h| 16 ++++++++++++++++arch/powerpc/include/asm/cpm2.h| 8 --------2 files changed, 16 insertions(+), 8 deletions(-)
applied to next
- k
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july
PATCH v2 4/8 powerpc/qe&cpm: Implement static inline stubs for non-QE/CPM builds
In reply to Anton VorontsovThis is needed to avoid ugly #ifdefs in drivers. Also update fsl_qe_udc driver so that now it doesn't define its own versions that cause build breakage when the generic stubs are used.
--- arch/powerpc/include/asm/cpm.h | 44 +++++++++++++++++++++++++++++++++++++++ arch/powerpc/include/asm/qe.h | 11 ++++++++- drivers/usb/gadget/fsl_qe_udc.h | 15 ------------- 3 files changed, 54 insertions(+), 16 deletions(-)
arch/powerpc/include/asm/cpm.h +44 -0
@@ -3,6 +3,7 @@#include <linux/compiler.h> #include <linux/types.h> +#include <linux/errno.h> #include <linux/of.h> /*
@@ -131,13 +132,56 @@ typedef struct cpm_buf_desc {#define BD_I2C_START (0x0400)int cpm_muram_init (void ); + +#if defined(CONFIG_CPM ) || defined(CONFIG_QUICC_ENGINE )unsigned long cpm_muram_alloc (unsigned long size,unsigned long align);int cpm_muram_free (unsigned long offset);unsigned long cpm_muram_alloc_fixed (unsigned long offset,unsigned long size);void __iomem *cpm_muram_addr (unsigned long offset);unsigned long cpm_muram_offset (void __iomem *addr);dma_addr_t cpm_muram_dma (void __iomem *addr); +#else +static inline unsigned long cpm_muram_alloc (unsigned long size, +unsigned long align) +{ +return -ENOSYS ; +} + +static inline int cpm_muram_free (unsigned long offset) +{ +return -ENOSYS ; +} + +static inline unsigned long cpm_muram_alloc_fixed (unsigned long offset, +unsigned long size) +{ +return -ENOSYS ; +} + +static inline void __iomem *cpm_muram_addr (unsigned long offset) +{ +return NULL ; +} + +static inline unsigned long cpm_muram_offset (void __iomem *addr) +{ +return -ENOSYS ; +} + +static inline dma_addr_t cpm_muram_dma (void __iomem *addr) +{ +return 0 ; +} +#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */ + +#ifdef CONFIG_CPM int cpm_command (u32 command,u8 opcode); +#else +static inline int cpm_command (u32 command,u8 opcode) +{ +return -ENOSYS ; +} +#endif /* CONFIG_CPM */ int cpm2_gpiochip_add32 (struct device_node *np);
arch/powerpc/include/asm/qe.h +10 -1
@@ -145,8 +145,17 @@ static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {}static inline void qe_pin_set_dedicated (struct qe_pin *pin) {}#endif /* CONFIG_QE_GPIO */ -/* QE internal API */ +#ifdef CONFIG_QUICC_ENGINE int qe_issue_cmd (u32 cmd,u32 device,u8 mcn_protocol,u32 cmd_input); +#else +static inline int qe_issue_cmd (u32 cmd,u32 device,u8 mcn_protocol, +u32 cmd_input) +{ +return -ENOSYS ; +} +#endif /* CONFIG_QUICC_ENGINE */ + +/* QE internal API */ enum qe_clock qe_clock_source (const char *source);unsigned int qe_get_brg_clk (void );int qe_setbrg (enum qe_clock brg,unsigned int rate,unsigned int multiplier);
drivers/usb/gadget/fsl_qe_udc.h +0 -15
@@ -419,19 +419,4 @@ struct qe_udc {#define CPM_USB_RESTART_TX_OPCODE 0x0b#define CPM_USB_EP_SHIFT 5 -#ifndef CONFIG_CPM -inline int cpm_command (u32 command,u8 opcode) -{ -return -EOPNOTSUPP ; -} -#endif - -#ifndef CONFIG_QUICC_ENGINE -inline int qe_issue_cmd (u32 cmd,u32 device,u8 mcn_protocol, -u32 cmd_input) -{ -return -EOPNOTSUPP ; -} -#endif -#endif /* __FSL_QE_UDC_H */
Signature · 1 line
1.6.3.3
Re: [PATCH 4/8] powerpc/qe&cpm: Implement static inline stubs for non-QE/CPM builds
Quoted 5 lines · Anton Vorontsov
This is needed to avoid ugly #ifdefs in drivers. Also update
fsl_qe_udcdriver so that now it doesn't define its own versions that cause build breakage when the generic stubs are used.Signed-off-by Anton Vorontsov <[email protected]>
As you're just deleting code, I'll ack that :)
Hopefully you have tested building this thing...
thanks,
greg k-h
Re: [PATCH 4/8] powerpc/qe&cpm: Implement static inline stubs for non-QE/CPM builds
Quoted 5 lines · Greg KH
Quoted 4 lines · Anton Vorontsov
This is needed to avoid ugly #ifdefs in drivers. Also update
fsl_qe_udcdriver so that now it doesn't define its own versions that cause build breakage when the generic stubs are used.
Quoted 7 lines
Quoted 1 line
Signed-off-by Anton Vorontsov <[email protected]>As you're just deleting code, I'll ack that :)
Hopefully you have tested building this thing...
Yep, thanks!
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
Kumar Gala
AppliedRe: [PATCH 4/8] powerpc/qe&cpm: Implement static inline stubs for non-QE/CPM builds
In reply to Anton VorontsovQuoted 11 lines · Anton Vorontsov
This is needed to avoid ugly #ifdefs in drivers. Also update
fsl_qe_udcdriver so that now it doesn't define its own versions that cause build breakage when the generic stubs are used.Signed-off-by Anton Vorontsov <[email protected]>---
arch/powerpc/include/asm/cpm.h| 44 ++++++++++++++++++++++++++++++
+++++++++arch/powerpc/include/asm/qe.h | 11 ++++++++- drivers/usb/gadget/fsl_qe_udc.h | 15 ------------- 3 files changed, 54 insertions(+), 16 deletions(-)
applied to next
- k
PATCH v2 5/8 spi_mpc8xxx: Fix uninitialized variable
In reply to Anton VorontsovThis patch fixes the following warning:
CC drivers/spi/spi_mpc8xxx.o
spi_mpc8xxx.c: In function 'of_mpc8xxx_spi_probe':
spi_mpc8xxx.c:681: warning: 'ret' may be used uninitialized in this function
--- drivers/spi/spi_mpc8xxx.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/spi/spi_mpc8xxx.c +1 -0
@@ -709,6 +709,7 @@ static int of_mpc8xxx_spi_get_chipselects(struct device *dev) gpio =of_get_gpio_flags (np, i, &flags);if (!gpio_is_valid (gpio)) {dev_err (dev,"invalid gpio #%d: %d\n" , i, gpio); + ret = gpio; goto err_loop; }
Signature · 8 lines
1.6.3.3 ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july
Re: [PATCH 5/8] spi_mpc8xxx: Fix uninitialized variable
Quoted 11 lines · Anton Vorontsov
This patch fixes the following warning:
CC
drivers/spi/spi_mpc8xxx.o
spi_mpc8xxx.c: In function 'of_mpc8xxx_spi_probe':
spi_mpc8xxx.c:681: warning: 'ret' may be used uninitialized in this
functionSigned-off-by Anton Vorontsov <[email protected]>---
drivers/spi/spi_mpc8xxx.c| 1 +1 files changed, 1 insertions(+), 0 deletions(-)
- k
PATCH v2 6/8 spi_mpc8xxx: Factor out SPI mode change steps into a call
In reply to Anton VorontsovWe'll add more steps soon, so get rid of the duplication.
--- drivers/spi/spi_mpc8xxx.c | 56 +++++++++++++++++++------------------------- 1 files changed, 24 insertions(+), 32 deletions(-)
drivers/spi/spi_mpc8xxx.c +24 -32
@@ -155,6 +155,26 @@ MPC83XX_SPI_TX_BUF(u8)MPC83XX_SPI_TX_BUF (u16)MPC83XX_SPI_TX_BUF (u32) +static void mpc8xxx_spi_change_mode(struct spi_device *spi) +{ +struct mpc8xxx_spi *mspi =spi_master_get_devdata (spi->master); +struct spi_mpc8xxx_cs *cs = spi->controller_state; +__be32 __iomem *mode = &mspi->base->mode; +unsigned long flags; + + if (cs->hw_mode == mpc8xxx_spi_read_reg(mode)) + return; + +/* Turn off IRQs locally to minimize time that SPI is disabled. */ +local_irq_save (flags); + +/* Turn off SPI unit prior changing mode */ + mpc8xxx_spi_write_reg(mode, cs->hw_mode & ~SPMODE_ENABLE); + mpc8xxx_spi_write_reg(mode, cs->hw_mode); + +local_irq_restore (flags); +} + static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value) {struct mpc8xxx_spi *mpc8xxx_spi =spi_master_get_devdata (spi->master);
@@ -168,27 +188,13 @@ static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value) }if (value ==BITBANG_CS_ACTIVE ) { -u32 regval =mpc8xxx_spi_read_reg (&mpc8xxx_spi->base->mode); - mpc8xxx_spi->rx_shift = cs->rx_shift; mpc8xxx_spi->tx_shift = cs->tx_shift; mpc8xxx_spi->get_rx = cs->get_rx; mpc8xxx_spi->get_tx = cs->get_tx; -if (cs->hw_mode != regval) { -unsigned long flags; -__be32 __iomem *mode = &mpc8xxx_spi->base->mode; - - regval = cs->hw_mode; -/* Turn off IRQs locally to minimize time that -* SPI is disabled -*/ -local_irq_save (flags); -/* Turn off SPI unit prior changing mode */ -mpc8xxx_spi_write_reg (mode, regval & ~SPMODE_ENABLE ); -mpc8xxx_spi_write_reg (mode, regval); -local_irq_restore (flags); - } +mpc8xxx_spi_change_mode (spi); +if (pdata->cs_control) pdata->cs_control (spi, pol); }
@@ -198,7 +204,6 @@ staticint mpc8xxx_spi_setup_transfer (struct spi_device *spi,struct spi_transfer *t) {struct mpc8xxx_spi *mpc8xxx_spi; -u32 regval;u8 bits_per_word, pm;u32 hz;struct spi_mpc8xxx_cs *cs = spi->controller_state;
@@ -286,21 +291,8 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) pm--; cs->hw_mode |=SPMODE_PM (pm); - regval =mpc8xxx_spi_read_reg (&mpc8xxx_spi->base->mode); -if (cs->hw_mode != regval) { -unsigned long flags; -__be32 __iomem *mode = &mpc8xxx_spi->base->mode; - - regval = cs->hw_mode; -/* Turn off IRQs locally to minimize time -* that SPI is disabled -*/ -local_irq_save (flags); -/* Turn off SPI unit prior changing mode */ -mpc8xxx_spi_write_reg (mode, regval & ~SPMODE_ENABLE ); -mpc8xxx_spi_write_reg (mode, regval); -local_irq_restore (flags); - } + +mpc8xxx_spi_change_mode (spi);return 0 ; }
Signature · 1 line
1.6.3.3
PATCH v2 7/8 spi_mpc8xxx: Turn qe_mode into flags
In reply to Anton VorontsovSoon there will be more flags introduced in subsequent patches, so let's turn qe_mode into flags.
Also introduce mpc8xxx_spi_strmode() and print current SPI mode.
--- drivers/spi/spi_mpc8xxx.c | 30 +++++++++++++++++++----------- include/linux/fsl_devices.h | 2 +- 2 files changed, 20 insertions(+), 12 deletions(-)
drivers/spi/spi_mpc8xxx.c +19 -11
@@ -96,7 +96,8 @@ struct mpc8xxx_spi {u32 rx_shift;/* RX data reg shift when in qe mode */ u32 tx_shift;/* TX data reg shift when in qe mode */ -bool qe_mode; +unsigned int flags; +#define SPI_QE_CPU_MODE (1 << 0)/* QE CPU ("PIO") mode */ struct workqueue_struct *workqueue;struct work_struct work;
@@ -235,14 +236,14 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)if (bits_per_word <=8 ) { cs->get_rx = mpc8xxx_spi_rx_buf_u8; cs->get_tx = mpc8xxx_spi_tx_buf_u8; -if (mpc8xxx_spi->qe_mode) { +if (mpc8xxx_spi->flags &SPI_QE_CPU_MODE ) { cs->rx_shift =16 ; cs->tx_shift =24 ; } }else if (bits_per_word <=16 ) { cs->get_rx = mpc8xxx_spi_rx_buf_u16; cs->get_tx = mpc8xxx_spi_tx_buf_u16; -if (mpc8xxx_spi->qe_mode) { +if (mpc8xxx_spi->flags &SPI_QE_CPU_MODE ) { cs->rx_shift =16 ; cs->tx_shift =16 ; }
@@ -252,7 +253,8 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) }else return -EINVAL ; -if (mpc8xxx_spi->qe_mode && spi->mode &SPI_LSB_FIRST ) { +if (mpc8xxx_spi->flags &SPI_QE_CPU_MODE && + spi->mode &SPI_LSB_FIRST ) { cs->tx_shift =0 ;if (bits_per_word <=8 ) cs->rx_shift =8 ;
@@ -518,6 +520,13 @@ static void mpc8xxx_spi_cleanup(struct spi_device *spi)kfree (spi->controller_state); } +static const char *mpc8xxx_spi_strmode (unsigned int flags) +{ +if (flags &SPI_QE_CPU_MODE ) +return "QE CPU" ; +return "CPU" ; +} +static struct spi_master *__devinit mpc8xxx_spi_probe (struct device *dev,struct resource *mem,unsigned int irq) {
@@ -544,14 +553,14 @@ mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) master->cleanup = mpc8xxx_spi_cleanup; mpc8xxx_spi =spi_master_get_devdata (master); - mpc8xxx_spi->qe_mode = pdata->qe_mode; mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; + mpc8xxx_spi->flags = pdata->flags; mpc8xxx_spi->spibrg = pdata->sysclk; mpc8xxx_spi->rx_shift =0 ; mpc8xxx_spi->tx_shift =0 ; -if (mpc8xxx_spi->qe_mode) { +if (mpc8xxx_spi->flags &SPI_QE_CPU_MODE ) { mpc8xxx_spi->rx_shift =16 ; mpc8xxx_spi->tx_shift =24 ; }
@@ -584,7 +593,7 @@ mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq)/* Enable SPI interface */ regval = pdata->initial_spmode |SPMODE_INIT_VAL |SPMODE_ENABLE ; -if (pdata->qe_mode) +if (mpc8xxx_spi->flags &SPI_QE_CPU_MODE ) regval |=SPMODE_OP ;mpc8xxx_spi_write_reg (&mpc8xxx_spi->base->mode, regval);
@@ -604,9 +613,8 @@ mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq)if (ret <0 ) goto unreg_master; -printk (KERN_INFO -"%s: MPC8xxx SPI Controller driver at 0x%p (irq = %d)\n" , -dev_name (dev), mpc8xxx_spi->base, mpc8xxx_spi->irq); +dev_info (dev,"at 0x%p (irq = %d), %s mode\n" , mpc8xxx_spi->base, + mpc8xxx_spi->irq,mpc8xxx_spi_strmode (mpc8xxx_spi->flags));return master;
@@ -797,7 +805,7 @@ static int __devinit of_mpc8xxx_spi_probe(struct of_device *ofdev, prop =of_get_property (np,"mode" ,NULL );if (prop && !strcmp (prop,"cpu-qe" )) - pdata->qe_mode =1 ; + pdata->flags =SPI_QE_CPU_MODE ; ret =of_mpc8xxx_spi_get_chipselects (dev);if (ret)
include/linux/fsl_devices.h +1 -1
@@ -74,7 +74,7 @@ struct spi_device;struct fsl_spi_platform_data {u32 initial_spmode;/* initial SPMODE value */ s16 bus_num; -bool qe_mode; +unsigned int flags;/* board specific information */ u16 max_chipselect;void (*cs_control)(struct spi_device *spi,bool on);
Signature · 1 line
1.6.3.3
PATCH v2 8/8 spi_mpc8xxx: Add support for QE DMA mode and CPM1/CPM2 chips
In reply to Anton VorontsovThis patch adds QE buffer descriptors mode support for the spi_mpc8xxx driver, and as a side effect we now support CPM1 and CPM2 SPI controllers.
That means that today we support almost all MPC SPI controllers:
- MPC834x-style controllers (support PIO mode only);
- CPM1 and CPM2 controllers (support DMA mode only);
- QE SPI controllers in CPU mode (PIO mode with shift quirks);
- QE SPI controllers in buffer descriptors (DMA) mode;
The only controller we don't currently support is a newer eSPI (with a dedicated chip selects and a bit different registers map).
--- drivers/spi/Kconfig | 3 - drivers/spi/spi_mpc8xxx.c | 540 +++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 500 insertions(+), 43 deletions(-)
drivers/spi/Kconfig +0 -3
@@ -146,9 +146,6 @@ config SPI_MPC8xxx This enables using the Freescale MPC8xxx SPI controllers in master mode. - This driver uses a simple set of shift registers for data (opposed - to the CPM based descriptor model). - config SPI_OMAP_UWIRE tristate "OMAP1 MicroWire" depends on ARCH_OMAP1
drivers/spi/spi_mpc8xxx.c +500 -40
698 lines not on this page · raw message
Signature · 1 line
1.6.3.3
Quoted 3 lines · Anton Vorontsov
- Fix build issues in
fsl_qe_udc;
- Some minor cosmetic changes in "Add support for QE DMA mode and CPM1/CPM2 chips" patch.
Hmm ... the first four of these are pure PPC stuff and thus not appropriate to send as SPI patches; but the second four depend on them.
So I'll just say
and ask you to merge via the PPC tree. (And hope that you verified these are bisectable...)
Quoted 10 lines · David Brownell
Quoted 3 lines · Anton Vorontsov
- Fix build issues in
fsl_qe_udc;
- Some minor cosmetic changes in "Add support for QE DMA mode and CPM1/CPM2 chips" patch.Hmm ... the first four of these are pure PPC stuff and thus not appropriate to send as SPI patches; but the second four depend on them.
Quoted 6 lines
So I'll just say
Acked-by David Brownell <[email protected]>and ask you to merge via the PPC tree. (And hope that you verified these are bisectable...)
Thanks David.
Kumar, can you please merge the SPI part of this patch set?
Thanks,
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2