Skip to contentSkip to conversation

will ELDK 4.2 arm toolchain work for beagleboard u-boot?

U-Boot Robert P. J. Day 2 participants 2 messages Aug 19, 2009

lore
Share & tools
lore
#0 lore raw

i want to use ELDK 4.2 to cross-compile u-boot for my beagleboard,
can someone verify that it does that properly? thanks.

rday
--

========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA

Linux Consulting, Training and Annoying Kernel Pedantry.

Web page:                                          http://crashcourse.ca
Twitter:                                       http://twitter.com/rpjday

========================================================================

#1 lore raw

Dear "Robert P. J. Day",

Quoted 3 lines · In message <alpine.LFD.2.00.0908190541150.7369@localhost> you wrote:

i want to use ELDK 4.2 to cross-compile u-boot for my beagleboard,
can someone verify that it does that properly? thanks.

Yes, it does. We used it for U-Boot, kernel and user land code.

Best regards,

Wolfgang Denk

Signature · 7 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
They weren't that important. They were merely at the top. The  people
who  really  run organizations are usually found several levels down,
where it's still possible to get things done.
                                      - Terry Pratchett, _Small Gods_