Skip to contentSkip to conversation

AMD K10 temp.module ready since months, but missing in kernel...

DISCUSSION mmi 7 participants 8 messages Aug 20, 2009 – Aug 28, 2009 1 message not in the archive

lore
Share & tools
lore

mmi

author
#0 lore raw

Hello out there,

i found the code to read temperature of AMD K10 (Phenom) processors a couple of months ago in the net (GPL). I use it since January now and i wonder, why it's not in the kernel till now.

It's from the same author, who wrote k8temp.c (which is in kernel).

Thanks,

M. Miederer

#1 lore raw
Quoted 4 lines · mmi

Hello out there,

i found the code to read temperature of AMD K10 (Phenom) processors a couple of months ago in the net (GPL).

Perhaps you could provide a link to that code?

Quoted 8 lines

I use it since January now and i
wonder, why it's not in the kernel till now.

It's from the same author, who wrote k8temp.c (which is in kernel).

Thanks,

M. Miederer

Signature · 3 lines
Jesper Juhl <[email protected]>             http://www.chaosbits.net/
Plain text mails only, please      http://www.expita.com/nomime.html
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
#2 lore raw
In reply to mmi

[ adding relevant CCs ]

Quoted 16 lines · mmi

Hello out there,

i found the code to read temperature of AMD K10 (Phenom) processors a couple of months ago in the net (GPL). I use it since January now and i wonder, why it's not in the kernel till now.

It's from the same author, who wrote k8temp.c (which is in kernel).

Thanks,

M. Miederer
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 2 lines
Regards/Gruss,
    Boris.
#3 lore raw
Quoted 14 lines · Borislav Petkov

[ adding relevant CCs ]

Quoted 11 lines · mmi

Hello out there,

i found the code to read temperature of AMD K10 (Phenom) processors a couple of months ago in the net (GPL). I use it since January now and i wonder, why it's not in the kernel till now.

It's from the same author, who wrote k8temp.c (which is in kernel).

Thanks,

M. Miederer

Butting in on the thread:
And I would like this to get in very much. Not even gkrellm seems to be able to read my phenom since about 2.6.30.

Signature · 8 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
The NRA is offering FREE Associate memberships to anyone who wants them.
<https://www.nrahq.org/nrabonus/accept-membership.asp>

It's ten o'clock. Do you know where your source code is?
#4 lore raw
In reply to Borislav Petkov
Quoted 8 lines · Borislav Petkov
Quoted 7 lines · mmi

Hello out there,

i found the code to read temperature of AMD K10 (Phenom) processors a couple of months ago in the net (GPL). I use it since January now and i wonder, why it's not in the kernel till now.

It's from the same author, who wrote k8temp.c (which is in kernel).

MMI, do you mean this:
http://linux.derkeiler.com/Newsgroups/alt.os.linux/2008-08/msg00398.html

...or which code are you referring to?

Christian.

Signature · 3 lines
BOFH excuse #12:

dry joints on cable plug

A message that is not in the archive (sent off-list or not yet received): 20090827011019.59655f23@phenom

#6 lore raw
Quoted 24 lines · mm

Am Wed, 26 Aug 2009 13:15:45 -0700 (PDT) haben Sie (Christian Kujau <[email protected]>) geschrieben:

Quoted 12 lines · Borislav Petkov
Quoted 10 lines · mmi
Quoted 9 lines

Hello out there,

i found the code to read temperature of AMD K10 (Phenom) processors a couple of months ago in the net (GPL). I use it since January now and i wonder, why it's not in the kernel till now.

It's from the same author, who wrote k8temp.c (which is in kernel).

Quoted 6 lines

MMI, do you mean this:
http://linux.derkeiler.com/Newsgroups/alt.os.linux/2008-08/msg00398.html

...or which code are you referring to?

Christian.

YES, i refer to the code of Rudolf Marek. I think, he also has written the k8tmp.c. So he and his code should be well known in main line.

Quoted 6 lines

In the meanwhile i read a discussion where Rudolf
thinks that it's not working on all Phenoms. Probably a problem on first series of Phenom I.

I tested it on latest Phenom I and since January on Phenom II, it works fine.

Well, it's Rudolf's code - if he thinks this code is ready for inclusion as well, we'd need his Signed-off to do so....

C.

Signature · 3 lines
BOFH excuse #213:

Change your language to Finnish.
#7 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi all,

There is a problem that all chips of fam10h have some errata which renders the monitoring driver unusable. Some people proposed a workaround if temps look too suspicious to refuse to load. This is against a sense of monitoring to refuse the values where they don't look "right". So there is no driver.

There is a patch for fam11h floating around.

Thanks,
Rudolf
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEARECAAYFAkqYM0sACgkQ3J9wPJqZRNWxjQCfdYKzvCu42L7dPlXSHFusAY0T FMgAnRTxkJrNCFoePwtNLjBTEsCXMF99
=gPv6
-----END PGP SIGNATURE-----

#8 lore raw
In reply to mmi
Quoted 7 lines · mmi

Hello out there,

i found the code to read temperature of AMD K10 (Phenom) processors a couple of months ago in the net (GPL). I use it since January now and i wonder, why it's not in the kernel till now.

It's from the same author, who wrote k8temp.c (which is in kernel).

So perhaps you need to clean it up and submit for mainline? Or just submit for staging?

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html