Add support for the DevKit8000 board
PATCH 1/1 Add support for the DevKit8000 board
This patch adds support for the DevKit8000 board.
Signed-off-by Frederik Kriewitz <[email protected]>
---mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000)
---
--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/devkit8000/Makefile | 52 +++++ board/devkit8000/config.mk | 35 ++++ board/devkit8000/devkit8000.c | 131 +++++++++++++ board/devkit8000/devkit8000.h | 373 ++++++++++++++++++++++++++++++++++++ doc/README.devkit8000 | 15 ++ include/configs/devkit8000.h | 307 +++++++++++++++++++++++++++++ include/configs/omap3_devkit8000.h | 307 +++++++++++++++++++++++++++++ 10 files changed, 1228 insertions(+), 0 deletions(-) create mode 100644 board/devkit8000/Makefile create mode 100644 board/devkit8000/config.mk create mode 100644 board/devkit8000/devkit8000.c create mode 100644 board/devkit8000/devkit8000.h create mode 100644 doc/README.devkit8000 create mode 100644 include/configs/devkit8000.h create mode 100644 include/configs/omap3_devkit8000.h
MAINTAINERS +4 -0
@@ -587,6 +587,10 @@ Nishant Kamat <[email protected]> omap1610h2 ARM926EJS +Frederik Kriewitz <[email protected]> + + omap3_devkit8000 ARM CORTEX-A8 (OMAP3530 SoC) + Sergey Kubushyn <[email protected]> DV-EVM ARM926EJS
MAKEALL +1 -0
@@ -576,6 +576,7 @@ LIST_ARM11=" \ ######################################################################### LIST_ARM_CORTEX_A8=" \ omap3_beagle \ + omap3_devkit8000 \ omap3_overo \ omap3_evm \ omap3_pandora \
Makefile +3 -0
@@ -3089,6 +3089,9 @@ SMN42_config : unconfig omap3_beagle_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3 +omap3_devkit8000_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 NULL omap3 + omap3_overo_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3
board/devkit8000/Makefile new file +52 -0
52 lines not on this page · raw message
board/devkit8000/config.mk new file +35 -0
@@ -0,0 +1,35 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# (C) Copyright 2009 +# Frederik Kriewitz <[email protected]> +# +# DevKit8000 uses OMAP3 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000
board/devkit8000/devkit8000.c new file +131 -0
131 lines not on this page · raw message
board/devkit8000/devkit8000.h new file +373 -0
373 lines not on this page · raw message
doc/README.devkit8000 new file +15 -0
@@ -0,0 +1,15 @@ +DevKit8000 +========== + +The OMAP3 DevKit8000 from Embest/Timll is a clone of the OMAP3 beagle board +with Ethernet and Touch Screen controller on board. + +For more information go to: +http://www.embedinfo.com/English/Product/devkit8000.asp + +There's no real MAC address available. +If ethaddr is not set, 5 Bytes of the OMAP Die ID will be used. + +Build: +make omap3_devkit8000_config +make
include/configs/devkit8000.h new file +307 -0
307 lines not on this page · raw message
include/configs/omap3_devkit8000.h new file +307 -0
307 lines not on this page · raw message
Signature · 1 line
1.6.3.3
PATCH 1/1 Add support for the DevKit8000 board
Dear Frederik Kriewitz,
Quoted 9 lines · In message <[email protected]> you wrote:
This patch adds support for the DevKit8000 board.
Signed-off-by Frederik Kriewitz <[email protected]>---
mach-types.hneeds to be synced (MACH_TYPE_DEVKIT8000)
------ MAINTAINERS | 4 + MAKEALL | 1 +
...
Will you please try and follow the rules?
I don't see any indication that this is a repost of earlier patches. I would expoect a version number (something like "[PATCH v4]") in the subject line.
git patches have exactly one "---" line, not 3.
I would expect to find a comment what you changed in this version of the patch compared to older versions. Or do you expect us to invest lots of (avoidable) effort to compare the diffs?
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Anyone who isn't confused here doesn't really know what's going on.