Support for Micrel/Kendin KS899xM managed switches.
Subsystems (2)
PATCH 1/1 Support for Micrel/Kendin KS899xM managed switches.
This patch adds simple support for KS8993M and KS8995MA managed switches. It uses SPI interface for configuration (as everything cannot be configured through MII). Switch can be configured to either regular switch or to "router mode" so that every port (except the host port) has it's own VLAN ("port based VLAN").
Signed-off-by Sami Kantoluoto <[email protected]>
--- drivers/net/phy/Makefile | 1 + drivers/net/phy/ks899xm.c | 189 +++++++++++++++++++++++++++++++++ drivers/net/phy/ks899xm.h | 255 +++++++++++++++++++++++++++++++++++++++++++++ include/netdev.h | 15 +++ 4 files changed, 460 insertions(+), 0 deletions(-) create mode 100644 drivers/net/phy/ks899xm.c create mode 100644 drivers/net/phy/ks899xm.h
drivers/net/phy/Makefile +1 -0
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libphy.a COBJS-$(CONFIG_BITBANGMII) += miiphybb.o +COBJS-$(CONFIG_KS899XM_SWITCH) += ks899xm.o COBJS-$(CONFIG_MV88E61XX_SWITCH) += mv88e61xx.o COBJS := $(COBJS-y)
drivers/net/phy/ks899xm.c new file +189 -0
189 lines not on this page · raw message
drivers/net/phy/ks899xm.h new file +255 -0
255 lines not on this page · raw message
include/netdev.h +15 -0
@@ -171,4 +171,19 @@ struct mv88e61xx_config {int mv88e61xx_switch_initialize (struct mv88e61xx_config *swconfig);#endif /* CONFIG_MV88E61XX_SWITCH */ +#ifdef CONFIG_KS899XM_SWITCH +enum ks899xm_cfg_vlan { +KS899XM_VLANCFG_DEFAULT , +KS899XM_VLANCFG_ROUTER +}; + +struct ks899xm_config { +unsigned spibus, spics; +enum ks899xm_cfg_vlan vlancfg; +}; + +int ks899xm_switch_initialize (const struct ks899xm_config *swconfig); + +#endif /* CONFIG_KS899XM_SWITCH */ +#endif /* _NETDEV_H_ */
Signature · 1 line
1.6.0.4