Skip to contentSkip to conversation

ixgbe: refactor link setup code

PATCH In review Jeff Kirsher 2 participants 4 messages Sep 1, 2009 – Sep 2, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 ixgbe: refactor link setup code

From: Mallikarjuna R Chilakala <[email protected]>

Link code cleanup: a number of redundant functions and MAC variables are cleaned up, with some functions being consolidated into a single-purpose code path. Removed following deprecated link functions and mac variables
* ixgbe_setup_copper_link_speed_82598
* ixgbe_setup_mac_link_speed_multispeed_fiber
* ixgbe_setup_mac_link_speed_82599
* mac.autoneg, mac.autoneg_succeeded, phy.autoneg_wait_to_complete

---

 drivers/net/ixgbe/ixgbe_82598.c   |   49 +++----------
 drivers/net/ixgbe/ixgbe_82599.c   |  135 ++++++++++++-------------------------
 drivers/net/ixgbe/ixgbe_ethtool.c |    4 +
 drivers/net/ixgbe/ixgbe_main.c    |   17 ++---
 drivers/net/ixgbe/ixgbe_type.h    |    7 --
 5 files changed, 67 insertions(+), 145 deletions(-)
drivers/net/ixgbe/ixgbe_82598.c +11 -38
index 916430f..cb7f0c3 100644
@@ -41,8 +41,7 @@
 static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
                                              ixgbe_link_speed *speed,
                                              bool *autoneg);
-static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
+static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
                                                ixgbe_link_speed speed,
                                                bool autoneg,
                                                bool autoneg_wait_to_complete);
@@ -156,8 +155,6 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
 	/* Overwrite the link function pointers if copper PHY */
 	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
 		mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
-		mac->ops.setup_link_speed =
-		                     &ixgbe_setup_copper_link_speed_82598;
 		mac->ops.get_link_capabilities =
 		                  &ixgbe_get_copper_link_capabilities_82598;
 	}
@@ -465,13 +462,14 @@ out:
 }
 
 /**
- *  ixgbe_setup_mac_link_82598 - Configures MAC link settings
+ *  ixgbe_start_mac_link_82598 - Configures MAC link settings
  *  @hw: pointer to hardware structure
  *
  *  Configures link settings based on values in the ixgbe_hw struct.
  *  Restarts the link.  Performs autonegotiation if needed.
  **/
-static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
+static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
+                                      bool autoneg_wait_to_complete)
 {
 	u32 autoc_reg;
 	u32 links_reg;
@@ -484,7 +482,7 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
 	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
 
 	/* Only poll for autoneg to complete if specified to do so */
-	if (hw->phy.autoneg_wait_to_complete) {
+	if (autoneg_wait_to_complete) {
 		if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
 		     IXGBE_AUTOC_LMS_KX4_AN ||
 		    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
@@ -600,7 +598,7 @@ out:
 
 
 /**
- *  ixgbe_setup_mac_link_speed_82598 - Set MAC link speed
+ *  ixgbe_setup_mac_link_82598 - Set MAC link speed
  *  @hw: pointer to hardware structure
  *  @speed: new link speed
  *  @autoneg: true if auto-negotiation enabled
@@ -608,7 +606,7 @@ out:
  *
  *  Set the link speed in the AUTOC register and restarts link.
  **/
-static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
+static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
                                            ixgbe_link_speed speed, bool autoneg,
                                            bool autoneg_wait_to_complete)
 {
@@ -638,14 +636,12 @@ static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
 	}
 
 	if (status == 0) {
-		hw->phy.autoneg_wait_to_complete = autoneg_wait_to_complete;
-
 		/*
 		 * Setup and restart the link based on the new values in
 		 * ixgbe_hw This will write the AUTOC register based on the new
 		 * stored values
 		 */
-		status = ixgbe_setup_mac_link_82598(hw);
+		status = ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
 	}
 
 	return status;
@@ -653,29 +649,7 @@ static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
 
 
 /**
- *  ixgbe_setup_copper_link_82598 - Setup copper link settings
- *  @hw: pointer to hardware structure
- *
- *  Configures link settings based on values in the ixgbe_hw struct.
- *  Restarts the link.  Performs autonegotiation if needed.  Restart
- *  phy and wait for autonegotiate to finish.  Then synchronize the
- *  MAC and PHY.
- **/
-static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
-{
-	s32 status;
-
-	/* Restart autonegotiation on PHY */
-	status = hw->phy.ops.setup_link(hw);
-
-	/* Set up MAC */
-	ixgbe_setup_mac_link_82598(hw);
-
-	return status;
-}
-
-/**
- *  ixgbe_setup_copper_link_speed_82598 - Set the PHY autoneg advertised field
+ *  ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
  *  @hw: pointer to hardware structure
  *  @speed: new link speed
  *  @autoneg: true if autonegotiation enabled
@@ -683,7 +657,7 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
  *
  *  Sets the link speed in the AUTOC register in the MAC and restarts link.
  **/
-static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
+static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
                                                ixgbe_link_speed speed,
                                                bool autoneg,
                                                bool autoneg_wait_to_complete)
@@ -695,7 +669,7 @@ static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
 	                                      autoneg_wait_to_complete);
 
 	/* Set up MAC */
-	ixgbe_setup_mac_link_82598(hw);
+	ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
 
 	return status;
 }
@@ -1163,7 +1137,6 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
 	.read_analog_reg8	= &ixgbe_read_analog_reg8_82598,
 	.write_analog_reg8	= &ixgbe_write_analog_reg8_82598,
 	.setup_link		= &ixgbe_setup_mac_link_82598,
-	.setup_link_speed	= &ixgbe_setup_mac_link_speed_82598,
 	.check_link		= &ixgbe_check_mac_link_82598,
 	.get_link_capabilities	= &ixgbe_get_link_capabilities_82598,
 	.led_on			= &ixgbe_led_on_generic,
drivers/net/ixgbe/ixgbe_82599.c +45 -90

240 lines not on this page · raw message

drivers/net/ixgbe/ixgbe_ethtool.c +2 -2
index 1444ec5..026e94a 100644
@@ -233,11 +233,11 @@ static int ixgbe_set_settings(struct net_device *netdev,
 			return err;
 		/* this sets the link speed and restarts auto-neg */
 		hw->mac.autotry_restart = true;
-		err = hw->mac.ops.setup_link_speed(hw, advertised, true, true);
+		err = hw->mac.ops.setup_link(hw, advertised, true, true);
 		if (err) {
 			DPRINTK(PROBE, INFO,
 			        "setup link failed with code %d\n", err);
-			hw->mac.ops.setup_link_speed(hw, old, true, true);
+			hw->mac.ops.setup_link(hw, old, true, true);
 		}
 	} else {
 		/* in this case we currently only support 10Gb/FULL */
drivers/net/ixgbe/ixgbe_main.c +8 -9
index f907836..4042d87 100644
@@ -2516,7 +2516,7 @@ static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter)
 static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw)
 {
 	u32 autoneg;
-	bool link_up = false;
+	bool negotiation, link_up = false;
 	u32 ret = IXGBE_ERR_LINK_SETUP;
 
 	if (hw->mac.ops.check_link)
@@ -2526,13 +2526,12 @@ static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw)
 		goto link_cfg_out;
 
 	if (hw->mac.ops.get_link_capabilities)
-		ret = hw->mac.ops.get_link_capabilities(hw, &autoneg,
-		                                        &hw->mac.autoneg);
+		ret = hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
 	if (ret)
 		goto link_cfg_out;
 
-	if (hw->mac.ops.setup_link_speed)
-		ret = hw->mac.ops.setup_link_speed(hw, autoneg, true, link_up);
+	if (hw->mac.ops.setup_link)
+		ret = hw->mac.ops.setup_link(hw, autoneg, negotiation, link_up);
 link_cfg_out:
 	return ret;
 }
@@ -4517,14 +4516,14 @@ static void ixgbe_multispeed_fiber_task(struct work_struct *work)
 	                                             multispeed_fiber_task);
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 autoneg;
+	bool negotiation;
 
 	adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK;
 	autoneg = hw->phy.autoneg_advertised;
 	if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
-		hw->mac.ops.get_link_capabilities(hw, &autoneg,
-		                                  &hw->mac.autoneg);
-	if (hw->mac.ops.setup_link_speed)
-		hw->mac.ops.setup_link_speed(hw, autoneg, true, true);
+		hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
+	if (hw->mac.ops.setup_link)
+		hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
 	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
 	adapter->flags &= ~IXGBE_FLAG_IN_SFP_LINK_TASK;
 }
drivers/net/ixgbe/ixgbe_type.h +1 -6
index f0f3406..8ba90ee 100644
@@ -2332,9 +2332,7 @@ struct ixgbe_mac_operations {
 	s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
 
 	/* Link */
-	s32 (*setup_link)(struct ixgbe_hw *);
-	s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool,
-	                        bool);
+	s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool);
 	s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
 	s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
 	                             bool *);
@@ -2406,8 +2404,6 @@ struct ixgbe_mac_info {
 	u32                             orig_autoc;
 	u32                             orig_autoc2;
 	bool                            orig_link_settings_stored;
-	bool                            autoneg;
-	bool                            autoneg_succeeded;
 	bool                            autotry_restart;
 };
 
@@ -2422,7 +2418,6 @@ struct ixgbe_phy_info {
 	enum ixgbe_media_type           media_type;
 	bool                            reset_disable;
 	ixgbe_autoneg_advertised        autoneg_advertised;
-	bool                            autoneg_wait_to_complete;
 	bool                            multispeed_fiber;
 };
 
#1 lore raw

PATCH 2/3 ixgbe: Properly disable DCB arbiters prior to applying changes

From: Peter P Waskiewicz Jr <[email protected]>

When disabling the Rx and Tx data arbiters prior to configuration changes, the arbiters were not being shut down properly. This can create a race in the DCB hardware blocks, and potentially hang the arbiters. Also, the Tx descriptor arbiter shouldn't be disabled when applying configuration changes; disabling this arbiter can cause a Tx hang.

---

 drivers/net/ixgbe/ixgbe_dcb_82599.c |   21 ++++++++++++++-------
 1 files changed, 14 insertions(+), 7 deletions(-)
drivers/net/ixgbe/ixgbe_dcb_82599.c +14 -7
index 589f62c..ec8a252 100644
@@ -145,8 +145,12 @@ s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw,
 	u32    credit_max    = 0;
 	u8     i             = 0;
 
-	/* Disable the arbiter before changing parameters */
-	IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, IXGBE_RTRPCS_ARBDIS);
+	/*
+	 * Disable the arbiter before changing parameters
+	 * (always enable recycle mode; WSP)
+	 */
+	reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC | IXGBE_RTRPCS_ARBDIS;
+	IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
 
 	/* Map all traffic classes to their UP, 1 to 1 */
 	reg = 0;
@@ -194,9 +198,6 @@ s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw,
 	u32    reg, max_credits;
 	u8     i;
 
-	/* Disable the arbiter before changing parameters */
-	IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, IXGBE_RTTDCS_ARBDIS);
-
 	/* Clear the per-Tx queue credits; we use per-TC instead */
 	for (i = 0; i < 128; i++) {
 		IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
@@ -244,8 +245,14 @@ s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw,
 	u32 reg;
 	u8 i;
 
-	/* Disable the arbiter before changing parameters */
-	IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, IXGBE_RTTPCS_ARBDIS);
+	/*
+	 * Disable the arbiter before changing parameters
+	 * (always enable recycle mode; SP; arb delay)
+	 */
+	reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
+	      (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT) |
+	      IXGBE_RTTPCS_ARBDIS;
+	IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
 
 	/* Map all traffic classes to their UP, 1 to 1 */
 	reg = 0;
#2 lore raw

PATCH 3/3 ixgbe: Patch to fix 82599 multispeed fiber link issues when driver is loaded without any cable and reconnecting it to 1G partner

In reply to Jeff Kirsher

From: Mallikarjuna R Chilakala <[email protected]>

In 82599 multi speed fiber case when driver is loaded without any cable and reconnecting the cable with a 1G partner does not bring up the link in 1Gb mode. When there is no link we first setup the link at 10G & 1G and then try to re-establish the link at highest speed 10G and thereby changing autoneg_advertised value to highest speed 10G. After connecting back the cable to a 1G link partner we never try 1G as autoneg advertised value is changed to link at 10G only. The following patch fixes the issue by properly initializing the autoneg_advertised value just before exiting from link setup routine.

---

 drivers/net/ixgbe/ixgbe_82599.c |   22 +++++++++++-----------
 1 files changed, 11 insertions(+), 11 deletions(-)
drivers/net/ixgbe/ixgbe_82599.c +11 -11
index 5ee5608..61af47e 100644
@@ -421,15 +421,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 	hw->mac.ops.get_link_capabilities(hw, &phy_link_speed, &negotiation);
 	speed &= phy_link_speed;
 
-	 /* Set autoneg_advertised value based on input link speed */
-	hw->phy.autoneg_advertised = 0;
-
-	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
-		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
-
-	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
-		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
-
 	/*
 	 * When the driver changes the link speeds that it can support,
 	 * it sets autotry_restart to true to indicate that we need to
@@ -466,7 +457,7 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 		                               autoneg,
 		                               autoneg_wait_to_complete);
 		if (status != 0)
-			goto out;
+			return status;
 
 		/* Flap the tx laser if it has not already been done */
 		if (hw->mac.autotry_restart) {
@@ -520,7 +511,7 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 		                                      autoneg,
 		                                      autoneg_wait_to_complete);
 		if (status != 0)
-			goto out;
+			return status;
 
 		/* Flap the tx laser if it has not already been done */
 		if (hw->mac.autotry_restart) {
@@ -558,6 +549,15 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 		                                               autoneg_wait_to_complete);
 
 out:
+	/* Set autoneg_advertised value based on input link speed */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
 	return status;
 }