e4defrag: fallocate donor file only once
PATCH 1/1 e4defrag: fallocate donor file only once
If we allocate the donor file once for all, it will have a better chance to be continuous.
--- misc/e4defrag.c | 21 ++++++++++----------- 1 files changed, 10 insertions(+), 11 deletions(-)
misc/e4defrag.c +1 -10
@@ -1603,6 +1603,7 @@ static int file_defrag(const char *file, const struct stat64 *buf,struct fiemap_extent_list *donor_list_logical =NULL ;struct fiemap_extent_group *orig_group_head =NULL ;struct fiemap_extent_group *orig_group_tmp =NULL ; +ext4_fsblk_t orig_block_count; defraged_file_count++;
@@ -1742,19 +1743,17 @@ static int file_defrag(const char *file, const struct stat64 *buf,/* Allocate space for donor inode */ orig_group_tmp = orig_group_head; do { - ret = fallocate(donor_fd, 0, - (loff_t)orig_group_tmp->start->data.logical * block_size, - (loff_t)orig_group_tmp->len * block_size); - if (ret < 0) { - if (mode_flag & DETAIL) { - PRINT_FILE_NAME(file); - PRINT_ERR_MSG_WITH_ERRNO("Failed to fallocate"); - } - goto out; - }
Quoted 4 lines · Peng Tao
If we allocate the donor file once for all, it will have a better chance to be continuous.
Signed-off-by "Peng Tao" <[email protected]>
Seems like an improvement, but I'm not seeing any special handling for sparse files. (Not before or after this patch.)
Seems like there should be an outer loop that identifies contiguous data block sets in a sparse file and defrags them individually as opposed to trying to defrag the entire file at once.
My impression is that with a large sparse file, e4defrag currently (with or without this patch) would fallocate a full non-sparse donor set of blocks the full size of the original file, then swap in just the truly allocated blocks?
If so, that is not very optimum.
Greg
Quoted 13 lines · Greg Freemyer
Quoted 4 lines · Peng Tao
If we allocate the donor file once for all, it will have a better chance to be continuous.
Signed-off-by "Peng Tao" <[email protected]>Seems like an improvement, but I'm not seeing any special handling for sparse files. (Not before or after this patch.)
Seems like there should be an outer loop that identifies contiguous data block sets in a sparse file and defrags them individually as opposed to trying to defrag the entire file at once.
Quoted 6 lines
My impression is that with a large sparse file, e4defrag currently (with or without this patch) would fallocate a full non-sparse donor set of blocks the full size of the original file, then swap in just the truly allocated blocks?
If so, that is not very optimum.
And of course FIEMAP can be used to easily determine if the file is sparse.
Cheers, Andreas
--
Andreas Dilger
Sr. Staff Engineer, Lustre Group
Sun Microsystems of Canada, Inc.
Quoted 9 lines · Greg Freemyer
Quoted 4 lines · Peng Tao
If we allocate the donor file once for all, it will have a better chance to be continuous.
Signed-off-by "Peng Tao" <[email protected]>Seems like an improvement, but I'm not seeing any special handling for sparse files. (Not before or after this patch.)
Quoted 8 lines
Seems like there should be an outer loop that identifies contiguous data block sets in a sparse file and defrags them individually as opposed to trying to defrag the entire file at once.
My impression is that with a large sparse file, e4defrag currently (with or without this patch) would fallocate a full non-sparse donor set of blocks the full size of the original file, then swap in just the truly allocated blocks?
Thanks for the reminder. The original code takes good care of sparse files in join_extents(). Please ignore my patch.
Sorry for the noise.
Quoted 5 lines
If so, that is not very optimum.
Greg
Signature · 8 lines
Cheers, Peng Tao State Key Laboratory of Networking and Switching Technology Beijing Univ. of Posts and Telecoms. -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 14 lines · Peng Tao
Quoted 13 lines · Greg Freemyer
Quoted 4 lines · Peng Tao
If we allocate the donor file once for all, it will have a better chance to be continuous.
Signed-off-by "Peng Tao" <[email protected]>Seems like an improvement, but I'm not seeing any special handling for sparse files. (Not before or after this patch.)
Seems like there should be an outer loop that identifies contiguous data block sets in a sparse file and defrags them individually as opposed to trying to defrag the entire file at once.
Quoted 8 lines
Quoted 4 lines
My impression is that with a large sparse file, e4defrag currently (with or without this patch) would fallocate a full non-sparse donor set of blocks the full size of the original file, then swap in just the truly allocated blocks?
Thanks for the reminder. The original code takes good care of sparse files in
join_extents(). Please ignore my patch.Sorry for the noise.
RFC from a more ext4 knowledgeable person than me:
The code in e4defrag still looks way to complex. I don't see why it needs to know so much about extents and groups.
I just looked at util/copy_sparse.c
It simply loops through all the blocks in the source file and calls ioctl(fd, FIBMAP, &b) to see if they are allocated vs. sparse,
If allocated it copies the block from src to dest. Pretty straight forward and has none of the complexity of e4defrag.
Seems to me e4defrag should have the actual defrag_file() rewritten to be something like:
defrag_file() {
loop through the blocks looking for the contiguous set of data blocks.
defrag_contiguous_data(start_block, num_blocks)
}
defrag_contiguous_data(start_block, num_blocks) {
// allocate one full extent at a time and donate the blocks to orig file
for(start=start_block; start < start_block, num_blocks; start+=chunk) {
fallocate(chunk);
move_ext(orig, donor, start, 0, chunk);
}
}And then set chunk to be the max size of one extent. Maybe the "chunk" should be bigger than one extent?
Also, I did not put any logic in above to show testing to see if the new file is less fragmented than the original. That will add to the complexity, but hopefully the actual defrag logic can be as relatively simple as the above instead of what it is now.
Anyway, t would be a major change to e4defrag, but it seems that it would give ext4 a much better chance to reorganize itself by calling fallocate on full extent size chunks at minimum, instead of what the code currently does.
Greg
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 61 lines · Greg Freemyer
Quoted 14 lines · Peng Tao
Quoted 13 lines · Greg Freemyer
Quoted 4 lines · Peng Tao
If we allocate the donor file once for all, it will have a better chance to be continuous.
Signed-off-by "Peng Tao" <[email protected]>Seems like an improvement, but I'm not seeing any special handling for sparse files. (Not before or after this patch.)
Seems like there should be an outer loop that identifies contiguous data block sets in a sparse file and defrags them individually as opposed to trying to defrag the entire file at once.
Quoted 8 lines
Quoted 4 lines
My impression is that with a large sparse file, e4defrag currently (with or without this patch) would fallocate a full non-sparse donor set of blocks the full size of the original file, then swap in just the truly allocated blocks?
Thanks for the reminder. The original code takes good care of sparse files in
join_extents(). Please ignore my patch.Sorry for the noise.
RFC from a more ext4 knowledgeable person than me:
The code in e4defrag still looks way to complex. I don't see why it needs to know so much about extents and groups.
I just looked at
util/copy_sparse.cIt simply loops through all the blocks in the source file and calls
ioctl(fd, FIBMAP, &b)to see if they are allocated vs. sparse,If allocated it copies the block from src to dest. Pretty straight forward and has none of the complexity of e4defrag.
Seems to me e4defrag should have the actual
defrag_file()rewritten to be something like:
defrag_file(){
loop through the blocks looking for the contiguous set of data blocks.defrag_contiguous_data(start_block, num_blocks)
}
defrag_contiguous_data(start_block, num_blocks){
// allocate one full extent at a time and donate the blocks to orig filefor(start=start_block; start < start_block, num_blocks; start+=chunk){ fallocate(chunk);
move_ext(orig, donor, start, 0, chunk);
}
}And then set chunk to be the max size of one extent. Maybe the "chunk" should be bigger than one extent?
Also, I did not put any logic in above to show testing to see if the new file is less fragmented than the original. That will add to the complexity, but hopefully the actual defrag logic can be as relatively simple as the above instead of what it is now.
Quoted 4 lines
Anyway, t would be a major change to e4defrag, but it seems that it would give ext4 a much better chance to reorganize itself by calling fallocate on full extent size chunks at minimum, instead of what the code currently does.
Hi, Greg,
The current e4defrag is doing most of work exactly same as your RFC, and in a nicer manner. If you look into the code path, you'll see that its logic is very much like the RFC except that it first fallocates a donor file to see if a defragmentation is really necessary so it won't have to fall back during defragmentation, which IMO is a good design point.
Please correct me if I understand anything wrong.
Quoted 3 lines
Greg
Signature · 8 lines
Cheers, Peng Tao State Key Laboratory of Networking and Switching Technology Beijing Univ. of Posts and Telecoms. -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 68 lines · Peng Tao
Quoted 61 lines · Greg Freemyer
Quoted 14 lines · Peng Tao
Quoted 13 lines · Greg Freemyer
Quoted 4 lines · Peng Tao
If we allocate the donor file once for all, it will have a better chance to be continuous.
Signed-off-by "Peng Tao" <[email protected]>Seems like an improvement, but I'm not seeing any special handling for sparse files. (Not before or after this patch.)
Seems like there should be an outer loop that identifies contiguous data block sets in a sparse file and defrags them individually as opposed to trying to defrag the entire file at once.
Quoted 8 lines
Quoted 4 lines
My impression is that with a large sparse file, e4defrag currently (with or without this patch) would fallocate a full non-sparse donor set of blocks the full size of the original file, then swap in just the truly allocated blocks?
Thanks for the reminder. The original code takes good care of sparse files in
join_extents(). Please ignore my patch.Sorry for the noise.
RFC from a more ext4 knowledgeable person than me:
The code in e4defrag still looks way to complex. I don't see why it needs to know so much about extents and groups.
I just looked at
util/copy_sparse.cIt simply loops through all the blocks in the source file and calls
ioctl(fd, FIBMAP, &b)to see if they are allocated vs. sparse,If allocated it copies the block from src to dest. Pretty straight forward and has none of the complexity of e4defrag.
Seems to me e4defrag should have the actual
defrag_file()rewritten to be something like:
defrag_file(){
loop through the blocks looking for the contiguous set of data blocks.defrag_contiguous_data(start_block, num_blocks)
}
defrag_contiguous_data(start_block, num_blocks){
// allocate one full extent at a time and donate the blocks to orig filefor(start=start_block; start < start_block, num_blocks; start+=chunk){ fallocate(chunk);
move_ext(orig, donor, start, 0, chunk);
}
}And then set chunk to be the max size of one extent. Maybe the "chunk" should be bigger than one extent?
Also, I did not put any logic in above to show testing to see if the new file is less fragmented than the original. That will add to the complexity, but hopefully the actual defrag logic can be as relatively simple as the above instead of what it is now.
Quoted 4 lines
Anyway, t would be a major change to e4defrag, but it seems that it would give ext4 a much better chance to reorganize itself by calling fallocate on full extent size chunks at minimum, instead of what the code currently does.
Hi, Greg,
Quoted 8 lines
The current e4defrag is doing most of work exactly same as your RFC, and in a nicer manner. If you look into the code path, you'll see that its logic is very much like the RFC except that it first fallocates a donor file to see if a defragmentation is really necessary so it won't have to fall back during defragmentation, which IMO is a good design point.
Please correct me if I understand anything wrong.
I've looked a lot more at the current code. I'm pretty sure this is right:
First, assume defrag of a non-sparse 1TB file.
The current code will walk the extent tree and create a single extent group that covers the full 1TB, then call fallocate to try to get 1TB of donor blocks. Then compare the number of extents in the original and the donor. If the donor has less it will swap in the donor blocks.
It seems much smarter work on extent size chunks (or whatever best fits the kernels block structure.
ie.
for (start_block=0; start_block < max_blocks; start_block+= max_blocks_in_extent)
current_extents = num_extents_in_block_range(start_block,
start+max_blocks_in_extent);
if (current_extents == 1) continue;
// allocate a sparse file with perfectly aligned donor blocks ascurrently required by kernel
fallocate(start_block * block_size, max_blocks_in_extent * block_size);
donor_extents = num_extents_in_block_range(start_block,
start+max_blocks_in_extent);
if (donor_extents < current_extents)
donate_donor_blocks_to_orig(start_block,
start+max_blocks_in_extent);
)
And in the case of a sparse file, it seems much easier to understand if the above is called on each logically contiguous set or data blocks. Seriously, why bother the kernel by making it able to accept a block range that has holes in it.
It seems reasonable for the kernel to check the block range being passed in and if the orig files has a hole in the middle of it, then return an error.
Back to e4defrag, even if the code is not greatly simplified, the above seems like it would use far less resources than the current
code. Think about a large file that has the first 90% of the blocks
defrag'ed. The above would cause just the tail to be defrag'ed, not the entire file.
Greg
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 110 lines · Greg Freemyer
Quoted 66 lines · Peng Tao
Quoted 59 lines · Greg Freemyer
Quoted 13 lines · Peng Tao
Quoted 12 lines · Greg Freemyer
Quoted 4 lines · Peng Tao
If we allocate the donor file once for all, it will have a better chance to be continuous.
Signed-off-by "Peng Tao" <[email protected]>Seems like an improvement, but I'm not seeing any special handling for sparse files. (Not before or after this patch.)
Seems like there should be an outer loop that identifies contiguous data block sets in a sparse file and defrags them individually as opposed to trying to defrag the entire file at once.
Quoted 8 lines
Quoted 4 lines
My impression is that with a large sparse file, e4defrag currently (with or without this patch) would fallocate a full non-sparse donor set of blocks the full size of the original file, then swap in just the truly allocated blocks?
Thanks for the reminder. The original code takes good care of sparse files in
join_extents(). Please ignore my patch.Sorry for the noise.
RFC from a more ext4 knowledgeable person than me:
The code in e4defrag still looks way to complex. I don't see why it needs to know so much about extents and groups.
I just looked at
util/copy_sparse.cIt simply loops through all the blocks in the source file and calls
ioctl(fd, FIBMAP, &b)to see if they are allocated vs. sparse,If allocated it copies the block from src to dest. Pretty straight forward and has none of the complexity of e4defrag.
Seems to me e4defrag should have the actual
defrag_file()rewritten to be something like:
defrag_file(){
loop through the blocks looking for the contiguous set of data blocks.
defrag_contiguous_data(start_block, num_blocks)
}defrag_contiguous_data(start_block, num_blocks) { // allocate one full extent at a time and donate the blocks to orig file for(start=start_block; start < start_block, num_blocks; start+=chunk) { fallocate(chunk); move_ext(orig, donor, start, 0, chunk); } }And then set chunk to be the max size of one extent. Maybe the "chunk" should be bigger than one extent?
Also, I did not put any logic in above to show testing to see if the new file is less fragmented than the original. That will add to the complexity, but hopefully the actual defrag logic can be as relatively simple as the above instead of what it is now.
Quoted 4 lines
Anyway, t would be a major change to e4defrag, but it seems that it would give ext4 a much better chance to reorganize itself by calling fallocate on full extent size chunks at minimum, instead of what the code currently does.
Hi, Greg,
Quoted 8 lines
The current e4defrag is doing most of work exactly same as your RFC, and in a nicer manner. If you look into the code path, you'll see that its logic is very much like the RFC except that it first fallocates a donor file to see if a defragmentation is really necessary so it won't have to fall back during defragmentation, which IMO is a good design point.
Please correct me if I understand anything wrong.
I've looked a lot more at the current code. I'm pretty sure this is right:
First, assume defrag of a non-sparse 1TB file.
The current code will walk the extent tree and create a single extent group that covers the full 1TB, then call fallocate to try to get 1TB of donor blocks. Then compare the number of extents in the original and the donor. If the donor has less it will swap in the donor blocks.
It seems much smarter work on extent size chunks (or whatever best fits the kernels block structure.
ie.
for (start_block=0;
start_block<max_blocks; start_block+=max_blocks_in_extent)
current_extents= num_extents_in_block_range(start_block,
start+max_blocks_in_extent);if (current_extents == 1) continue; // allocate a sparse file with perfectly aligned donor blocks ascurrently required by kernel
fallocate(start_block * block_size, max_blocks_in_extent * block_size);
donor_extents= num_extents_in_block_range(start_block,
start+max_blocks_in_extent);if (
donor_extents<current_extents)
donate_donor_blocks_to_orig(start_block,
start+max_blocks_in_extent);
Quoted 6 lines
)
And in the case of a sparse file, it seems much easier to understand if the above is called on each logically contiguous set or data blocks. Seriously, why bother the kernel by making it able to accept a block range that has holes in it.
Agreed. If the kernel doesn't have to deal with holes, the EXT4_IOC_MOVE_EXT ioctl can be much simplified.
Quoted 10 lines
It seems reasonable for the kernel to check the block range being passed in and if the orig files has a hole in the middle of it, then return an error.
Back to e4defrag, even if the code is not greatly simplified, the above seems like it would use far less resources than the current
code. Think about a large file that has the first 90% of the blocks
defrag'ed. The above would cause just the tail to be defrag'ed, not the entire file.
Yes, it makes sense. Are you planning some patch for above changes?
Quoted 3 lines
Greg
Signature · 4 lines
Best Regards, Peng Tao State Key Laboratory of Networking and Switching Technology Beijing Univ. of Posts and Telecoms.
Quoted 124 lines · Peng Tao
Quoted 110 lines · Greg Freemyer
Quoted 66 lines · Peng Tao
Quoted 59 lines · Greg Freemyer
Quoted 13 lines · Peng Tao
Quoted 12 lines · Greg Freemyer
Quoted 4 lines · Peng Tao
If we allocate the donor file once for all, it will have a better chance to be continuous.
Signed-off-by "Peng Tao" <[email protected]>Seems like an improvement, but I'm not seeing any special handling for sparse files. (Not before or after this patch.)
Seems like there should be an outer loop that identifies contiguous data block sets in a sparse file and defrags them individually as opposed to trying to defrag the entire file at once.
Quoted 8 lines
Quoted 4 lines
My impression is that with a large sparse file, e4defrag currently (with or without this patch) would fallocate a full non-sparse donor set of blocks the full size of the original file, then swap in just the truly allocated blocks?
Thanks for the reminder. The original code takes good care of sparse files in
join_extents(). Please ignore my patch.Sorry for the noise.
RFC from a more ext4 knowledgeable person than me:
The code in e4defrag still looks way to complex. I don't see why it needs to know so much about extents and groups.
I just looked at
util/copy_sparse.cIt simply loops through all the blocks in the source file and calls
ioctl(fd, FIBMAP, &b)to see if they are allocated vs. sparse,If allocated it copies the block from src to dest. Pretty straight forward and has none of the complexity of e4defrag.
Seems to me e4defrag should have the actual
defrag_file()rewritten to be something like:
defrag_file(){
loop through the blocks looking for the contiguous set of data blocks.defrag_contiguous_data(start_block, num_blocks)
}
defrag_contiguous_data(start_block, num_blocks){
// allocate one full extent at a time and donate the blocks to orig filefor(start=start_block; start < start_block, num_blocks; start+=chunk){ fallocate(chunk);
move_ext(orig, donor, start, 0, chunk);
}
}And then set chunk to be the max size of one extent. Maybe the "chunk" should be bigger than one extent?
Also, I did not put any logic in above to show testing to see if the new file is less fragmented than the original. That will add to the complexity, but hopefully the actual defrag logic can be as relatively simple as the above instead of what it is now.
Quoted 4 lines
Anyway, t would be a major change to e4defrag, but it seems that it would give ext4 a much better chance to reorganize itself by calling fallocate on full extent size chunks at minimum, instead of what the code currently does.
Hi, Greg,
Quoted 8 lines
The current e4defrag is doing most of work exactly same as your RFC, and in a nicer manner. If you look into the code path, you'll see that its logic is very much like the RFC except that it first fallocates a donor file to see if a defragmentation is really necessary so it won't have to fall back during defragmentation, which IMO is a good design point.
Please correct me if I understand anything wrong.
I've looked a lot more at the current code. I'm pretty sure this is right:
First, assume defrag of a non-sparse 1TB file.
The current code will walk the extent tree and create a single extent group that covers the full 1TB, then call fallocate to try to get 1TB of donor blocks. Then compare the number of extents in the original and the donor. If the donor has less it will swap in the donor blocks.
It seems much smarter work on extent size chunks (or whatever best fits the kernels block structure.
ie.
for (start_block=0;
start_block<max_blocks; start_block+=max_blocks_in_extent)
current_extents=num_extents_in_block_range(start_block, start+max_blocks_in_extent);if (
current_extents== 1) continue;// allocate a sparse file with perfectly aligned donor blocks as currently required by kernel
fallocate(start_block * block_size, max_blocks_in_extent * block_size);
donor_extents=num_extents_in_block_range(start_block, start+max_blocks_in_extent);if (
donor_extents<current_extents)donate_donor_blocks_to_orig(start_block, start+max_blocks_in_extent);Quoted 6 lines
)
And in the case of a sparse file, it seems much easier to understand if the above is called on each logically contiguous set or data blocks. Seriously, why bother the kernel by making it able to accept a block range that has holes in it.
Agreed. If the kernel doesn't have to deal with holes, the
EXT4_IOC_MOVE_EXTioctl can be much simplified.Quoted 5 lines
It seems reasonable for the kernel to check the block range being passed in and if the orig files has a hole in the middle of it, then return an error.
Quoted 6 lines
Quoted 5 lines
Back to e4defrag, even if the code is not greatly simplified, the above seems like it would use far less resources than the current code. Think about a large file that has the first 90% of the blocks defrag'ed. The above would cause just the tail to be defrag'ed, not the entire file.
Yes, it makes sense. Are you planning some patch for above changes?
I'm "planning", but I doubt that I get to it for a few weeks. If you or someone else has time, that would be great.
Greg
Signature · 14 lines
Greg Freemyer Head of EDD Tape Extraction and Processing team Litigation Triage Solutions Specialist http://www.linkedin.com/in/gregfreemyer Preservation and Forensic processing of Exchange Repositories White Paper - <http://www.norcrossgroup.com/forms/whitepapers/tng_whitepaper_fpe.html> The Norcross Group The Intersection of Evidence & Technology http://www.norcrossgroup.com -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 128 lines · Greg Freemyer
Quoted 127 lines · Peng Tao
Quoted 109 lines · Greg Freemyer
Quoted 66 lines · Peng Tao
Quoted 59 lines · Greg Freemyer
Quoted 13 lines · Peng Tao
Quoted 12 lines · Greg Freemyer
Quoted 4 lines · Peng Tao
If we allocate the donor file once for all, it will have a better chance to be continuous.
Signed-off-by "Peng Tao" <[email protected]>Seems like an improvement, but I'm not seeing any special handling for sparse files. (Not before or after this patch.)
Seems like there should be an outer loop that identifies contiguous data block sets in a sparse file and defrags them individually as opposed to trying to defrag the entire file at once.
Quoted 8 lines
Quoted 4 lines
My impression is that with a large sparse file, e4defrag currently (with or without this patch) would fallocate a full non-sparse donor set of blocks the full size of the original file, then swap in just the truly allocated blocks?
Thanks for the reminder. The original code takes good care of sparse files in
join_extents(). Please ignore my patch.Sorry for the noise.
RFC from a more ext4 knowledgeable person than me:
The code in e4defrag still looks way to complex. I don't see why it needs to know so much about extents and groups.
I just looked at
util/copy_sparse.cIt simply loops through all the blocks in the source file and calls
ioctl(fd, FIBMAP, &b)to see if they are allocated vs. sparse,If allocated it copies the block from src to dest. Pretty straight forward and has none of the complexity of e4defrag.
Seems to me e4defrag should have the actual
defrag_file()rewritten to be something like:
defrag_file(){
loop through the blocks looking for the contiguous set of data blocks.
defrag_contiguous_data(start_block, num_blocks)
}defrag_contiguous_data(start_block, num_blocks) { // allocate one full extent at a time and donate the blocks to orig file for(start=start_block; start < start_block, num_blocks; start+=chunk) { fallocate(chunk); move_ext(orig, donor, start, 0, chunk); } }And then set chunk to be the max size of one extent. Maybe the "chunk" should be bigger than one extent?
Also, I did not put any logic in above to show testing to see if the new file is less fragmented than the original. That will add to the complexity, but hopefully the actual defrag logic can be as relatively simple as the above instead of what it is now.
Quoted 4 lines
Anyway, t would be a major change to e4defrag, but it seems that it would give ext4 a much better chance to reorganize itself by calling fallocate on full extent size chunks at minimum, instead of what the code currently does.
Hi, Greg,
Quoted 8 lines
The current e4defrag is doing most of work exactly same as your RFC, and in a nicer manner. If you look into the code path, you'll see that its logic is very much like the RFC except that it first fallocates a donor file to see if a defragmentation is really necessary so it won't have to fall back during defragmentation, which IMO is a good design point.
Please correct me if I understand anything wrong.
I've looked a lot more at the current code. I'm pretty sure this is right:
First, assume defrag of a non-sparse 1TB file.
The current code will walk the extent tree and create a single extent group that covers the full 1TB, then call fallocate to try to get 1TB of donor blocks. Then compare the number of extents in the original and the donor. If the donor has less it will swap in the donor blocks.
It seems much smarter work on extent size chunks (or whatever best fits the kernels block structure.
ie.
for (start_block=0;
start_block<max_blocks; start_block+=max_blocks_in_extent)
current_extents= num_extents_in_block_range(start_block,
start+max_blocks_in_extent);if (current_extents == 1) continue; // allocate a sparse file with perfectly aligned donor blocks ascurrently required by kernel
fallocate(start_block * block_size, max_blocks_in_extent * block_size);
donor_extents= num_extents_in_block_range(start_block,
start+max_blocks_in_extent);if (
donor_extents<current_extents)
donate_donor_blocks_to_orig(start_block,
start+max_blocks_in_extent);Quoted 6 lines
)
And in the case of a sparse file, it seems much easier to understand if the above is called on each logically contiguous set or data blocks. Seriously, why bother the kernel by making it able to accept a block range that has holes in it.
Agreed. If the kernel doesn't have to deal with holes, the
EXT4_IOC_MOVE_EXTioctl can be much simplified.Quoted 9 lines
It seems reasonable for the kernel to check the block range being passed in and if the orig files has a hole in the middle of it, then return an error.
Back to e4defrag, even if the code is not greatly simplified, the above seems like it would use far less resources than the current
code. Think about a large file that has the first 90% of the blocks
defrag'ed. The above would cause just the tail to be defrag'ed, not the entire file.
Quoted 4 lines
Quoted 1 line
Yes, it makes sense. Are you planning some patch for above changes?
I'm "planning", but I doubt that I get to it for a few weeks. If you or someone else has time, that would be great.
I don't have time for it in a few weeks either. So if anyone is interested, please drop in.
Quoted 2 lines
Greg
Signature · 4 lines
Best Regards, Peng Tao State Key Laboratory of Networking and Switching Technology Beijing Univ. of Posts and Telecoms.
Quoted 136 lines · Peng Tao
Quoted 128 lines · Greg Freemyer
Quoted 127 lines · Peng Tao
Quoted 109 lines · Greg Freemyer
Quoted 66 lines · Peng Tao
Quoted 59 lines · Greg Freemyer
Quoted 13 lines · Peng Tao
Quoted 12 lines · Greg Freemyer
Quoted 4 lines · Peng Tao
If we allocate the donor file once for all, it will have a better chance to be continuous.
Signed-off-by "Peng Tao" <[email protected]>Seems like an improvement, but I'm not seeing any special handling for sparse files. (Not before or after this patch.)
Seems like there should be an outer loop that identifies contiguous data block sets in a sparse file and defrags them individually as opposed to trying to defrag the entire file at once.
Quoted 8 lines
Quoted 4 lines
My impression is that with a large sparse file, e4defrag currently (with or without this patch) would fallocate a full non-sparse donor set of blocks the full size of the original file, then swap in just the truly allocated blocks?
Thanks for the reminder. The original code takes good care of sparse files in
join_extents(). Please ignore my patch.Sorry for the noise.
RFC from a more ext4 knowledgeable person than me:
The code in e4defrag still looks way to complex. I don't see why it needs to know so much about extents and groups.
I just looked at
util/copy_sparse.cIt simply loops through all the blocks in the source file and calls
ioctl(fd, FIBMAP, &b)to see if they are allocated vs. sparse,If allocated it copies the block from src to dest. Pretty straight forward and has none of the complexity of e4defrag.
Seems to me e4defrag should have the actual
defrag_file()rewritten to be something like:
defrag_file(){
loop through the blocks looking for the contiguous set of data blocks.defrag_contiguous_data(start_block, num_blocks)
}
defrag_contiguous_data(start_block, num_blocks){
// allocate one full extent at a time and donate the blocks to orig filefor(start=start_block; start < start_block, num_blocks; start+=chunk){ fallocate(chunk);
move_ext(orig, donor, start, 0, chunk);
}
}And then set chunk to be the max size of one extent. Maybe the "chunk" should be bigger than one extent?
Also, I did not put any logic in above to show testing to see if the new file is less fragmented than the original. That will add to the complexity, but hopefully the actual defrag logic can be as relatively simple as the above instead of what it is now.
Quoted 4 lines
Anyway, t would be a major change to e4defrag, but it seems that it would give ext4 a much better chance to reorganize itself by calling fallocate on full extent size chunks at minimum, instead of what the code currently does.
Hi, Greg,
Quoted 8 lines
The current e4defrag is doing most of work exactly same as your RFC, and in a nicer manner. If you look into the code path, you'll see that its logic is very much like the RFC except that it first fallocates a donor file to see if a defragmentation is really necessary so it won't have to fall back during defragmentation, which IMO is a good design point.
Please correct me if I understand anything wrong.
I've looked a lot more at the current code. I'm pretty sure this is right:
First, assume defrag of a non-sparse 1TB file.
The current code will walk the extent tree and create a single extent group that covers the full 1TB, then call fallocate to try to get 1TB of donor blocks. Then compare the number of extents in the original and the donor. If the donor has less it will swap in the donor blocks.
It seems much smarter work on extent size chunks (or whatever best fits the kernels block structure.
ie.
for (start_block=0;
start_block<max_blocks; start_block+=max_blocks_in_extent)
current_extents=num_extents_in_block_range(start_block, start+max_blocks_in_extent);if (
current_extents== 1) continue;// allocate a sparse file with perfectly aligned donor blocks as currently required by kernel
fallocate(start_block * block_size, max_blocks_in_extent * block_size);
donor_extents=num_extents_in_block_range(start_block, start+max_blocks_in_extent);if (
donor_extents<current_extents)donate_donor_blocks_to_orig(start_block, start+max_blocks_in_extent);Quoted 6 lines
)
And in the case of a sparse file, it seems much easier to understand if the above is called on each logically contiguous set or data blocks. Seriously, why bother the kernel by making it able to accept a block range that has holes in it.
Agreed. If the kernel doesn't have to deal with holes, the
EXT4_IOC_MOVE_EXTioctl can be much simplified.Quoted 9 lines
It seems reasonable for the kernel to check the block range being passed in and if the orig files has a hole in the middle of it, then return an error.
Back to e4defrag, even if the code is not greatly simplified, the above seems like it would use far less resources than the current code. Think about a large file that has the first 90% of the blocks defrag'ed. The above would cause just the tail to be defrag'ed, not the entire file.
Quoted 4 lines
Quoted 1 line
Yes, it makes sense. Are you planning some patch for above changes?
I'm "planning", but I doubt that I get to it for a few weeks. If you or someone else has time, that would be great.
I don't have time for it in a few weeks either. So if anyone is interested, please drop in.
Quoted 1 line
Quoted 9 lines
Quoted 1 line
Greg
--
Best Regards,
Peng Tao
State Key Laboratory of Networking and Switching Technology Beijing Univ. of Posts and Telecoms.
If I take a shot at this, which branch should a base my patch against? Master?
Thanks
Greg
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 140 lines · Greg Freemyer
Quoted 139 lines · Peng Tao
Quoted 128 lines · Greg Freemyer
Quoted 127 lines · Peng Tao
Quoted 109 lines · Greg Freemyer
Quoted 66 lines · Peng Tao
Quoted 59 lines · Greg Freemyer
Quoted 13 lines · Peng Tao
Quoted 12 lines · Greg Freemyer
Quoted 4 lines · Peng Tao
If we allocate the donor file once for all, it will have a better chance to be continuous.
Signed-off-by "Peng Tao" <[email protected]>Seems like an improvement, but I'm not seeing any special handling for sparse files. (Not before or after this patch.)
Seems like there should be an outer loop that identifies contiguous data block sets in a sparse file and defrags them individually as opposed to trying to defrag the entire file at once.
Quoted 8 lines
Quoted 4 lines
My impression is that with a large sparse file, e4defrag currently (with or without this patch) would fallocate a full non-sparse donor set of blocks the full size of the original file, then swap in just the truly allocated blocks?
Thanks for the reminder. The original code takes good care of sparse files in
join_extents(). Please ignore my patch.Sorry for the noise.
RFC from a more ext4 knowledgeable person than me:
The code in e4defrag still looks way to complex. I don't see why it needs to know so much about extents and groups.
I just looked at
util/copy_sparse.cIt simply loops through all the blocks in the source file and calls
ioctl(fd, FIBMAP, &b)to see if they are allocated vs. sparse,If allocated it copies the block from src to dest. Pretty straight forward and has none of the complexity of e4defrag.
Seems to me e4defrag should have the actual
defrag_file()rewritten to be something like:
defrag_file(){
loop through the blocks looking for the contiguous set of data blocks.defrag_contiguous_data(start_block, num_blocks)
}
defrag_contiguous_data(start_block, num_blocks){
// allocate one full extent at a time and donate the blocks to orig filefor(start=start_block; start < start_block, num_blocks; start+=chunk){ fallocate(chunk);
move_ext(orig, donor, start, 0, chunk);
}
}And then set chunk to be the max size of one extent. Maybe the "chunk" should be bigger than one extent?
Also, I did not put any logic in above to show testing to see if the new file is less fragmented than the original. That will add to the complexity, but hopefully the actual defrag logic can be as relatively simple as the above instead of what it is now.
Quoted 4 lines
Anyway, t would be a major change to e4defrag, but it seems that it would give ext4 a much better chance to reorganize itself by calling fallocate on full extent size chunks at minimum, instead of what the code currently does.
Hi, Greg,
Quoted 8 lines
The current e4defrag is doing most of work exactly same as your RFC, and in a nicer manner. If you look into the code path, you'll see that its logic is very much like the RFC except that it first fallocates a donor file to see if a defragmentation is really necessary so it won't have to fall back during defragmentation, which IMO is a good design point.
Please correct me if I understand anything wrong.
I've looked a lot more at the current code. I'm pretty sure this is right:
First, assume defrag of a non-sparse 1TB file.
The current code will walk the extent tree and create a single extent group that covers the full 1TB, then call fallocate to try to get 1TB of donor blocks. Then compare the number of extents in the original and the donor. If the donor has less it will swap in the donor blocks.
It seems much smarter work on extent size chunks (or whatever best fits the kernels block structure.
ie.
for (start_block=0;
start_block<max_blocks; start_block+=max_blocks_in_extent)
current_extents=num_extents_in_block_range(start_block, start+max_blocks_in_extent);if (
current_extents== 1) continue;// allocate a sparse file with perfectly aligned donor blocks as currently required by kernel
fallocate(start_block * block_size, max_blocks_in_extent * block_size);
donor_extents=num_extents_in_block_range(start_block, start+max_blocks_in_extent);if (
donor_extents<current_extents)donate_donor_blocks_to_orig(start_block, start+max_blocks_in_extent);Quoted 6 lines
)
And in the case of a sparse file, it seems much easier to understand if the above is called on each logically contiguous set or data blocks. Seriously, why bother the kernel by making it able to accept a block range that has holes in it.
Agreed. If the kernel doesn't have to deal with holes, the
EXT4_IOC_MOVE_EXTioctl can be much simplified.Quoted 9 lines
It seems reasonable for the kernel to check the block range being passed in and if the orig files has a hole in the middle of it, then return an error.
Back to e4defrag, even if the code is not greatly simplified, the above seems like it would use far less resources than the current code. Think about a large file that has the first 90% of the blocks defrag'ed. The above would cause just the tail to be defrag'ed, not the entire file.
Quoted 4 lines
Quoted 1 line
Yes, it makes sense. Are you planning some patch for above changes?
I'm "planning", but I doubt that I get to it for a few weeks. If you or someone else has time, that would be great.
I don't have time for it in a few weeks either. So if anyone is interested, please drop in.
Quoted 2 lines
Greg
Quoted 8 lines
Quoted 6 lines
--
Best Regards,
Peng Tao
State Key Laboratory of Networking and Switching Technology Beijing Univ. of Posts and Telecoms.If I take a shot at this, which branch should a base my patch against? Master?
Yes, I think so. I verified that e4defrag.c is the same in master and pu branch.
Quoted 4 lines
Thanks
Greg
Signature · 8 lines
Cheers, Peng Tao State Key Laboratory of Networking and Switching Technology Beijing Univ. of Posts and Telecoms. -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html