HP Jornada 720 flashrom
Greetings,
Trying to get my Flashrom working (previously used blob with it).
I get this now :
c -Map u-boot.map -o u-boot
net/libnet.a(net.o)(.text+0x1cc): In function `ArpRequest':/home/kristoffer/work/projects/u-boot.git/net/net.c:250: undefined reference to eth_send' net/libnet.a(net.o)(.text+0x29c): In function NetStartAgain':/home/kristoffer/work/projects/u-boot.git/net/net.c:568: undefined reference to eth_halt' net/libnet.a(net.o)(.text+0x370): In function NetSendPacket':/home/kristoffer/work/projects/u-boot.git/net/net.c:623: undefined reference to eth_send' net/libnet.a(net.o)(.text+0x634): In function NetSendUDPPacket':/home/kristoffer/work/projects/u-boot.git/net/net.c:668: undefined reference to eth_send' net/libnet.a(net.o)(.text+0x910): In function NetReceive':/home/kristoffer/work/projects/u-boot.git/net/net.c:1263: undefined reference to eth_send' net/libnet.a(net.o)(.text+0x98c):/home/kristoffer/work/projects/u-boot.git/net/net.c:1295: undefined reference to eth_send' net/libnet.a(net.o)(.text+0xf04): In function `NetLoop':/home/kristoffer/work/projects/u-boot.git/net/net.c:342: undefined reference to eth_halt' net/libnet.a(net.o)(.text+0xf0c):/home/kristoffer/work/projects/u-boot.git/net/net.c:346: undefined reference to eth_init' net/libnet.a(net.o)(.text+0x101c):/home/kristoffer/work/projects/u-boot.git/net/net.c:370: undefined reference to eth_halt' net/libnet.a(net.o)(.text+0x10ac):/home/kristoffer/work/projects/u-boot.git/net/net.c:481: undefined reference to eth_halt' net/libnet.a(net.o)(.text+0x10cc):/home/kristoffer/work/projects/u-boot.git/net/net.c:475: undefined reference to eth_rx' net/libnet.a(net.o)(.text+0x11a4):/home/kristoffer/work/projects/u-boot.git/net/net.c:535: undefined reference to eth_halt'
make: *** [u-boot] Fel 1
My device shouldnt be using those at all so its no wonder that they are undefined, but the question is how I should get rid of those messages.
Best wishes
Kristoffer
Signature · 1 line
Kristoffer Ericson <[email protected]>
Dear Kristoffer Ericson,
Quoted 7 lines · In message <[email protected]> you wrote:
Greetings,
Trying to get my Flashrom working (previously used blob with it).
I get this now :
c -Map u-boot.map -o u-boot
net/libnet.a(net.o)(.text+0x1cc): In function `ArpRequest':/home/kristoffer/work/projects/u-boot.git/net/net.c:250: undefined reference to `eth_send'
...
Quoted 2 lines
My device shouldnt be using those at all so its no wonder that they are undefined, but the question is how I should get rid of those messages.
Don't enable network support in your board configuration? I. e. remove all command selections that require Ethenret to work...
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Substitute "damn" every time you're inclined to write "very"; your
editor will delete it and the writing will be just as it should be.
- Mark TwainStill having trouble finding exactly what is causing it. See below for my include/configs/jornada.h file.
include/configs/jornada.h new file +166 -0
@@ -0,0 +1,166 @@ +/* +* (C) Copyright 2002 +* Sysgo Real-Time Solutions, GmbH <www.elinos.com> +* Marius Groeger <[email protected]> +* +* 2004 (c) MontaVista Software, Inc. +* +* Configuation settings for the Intel Assabet board. +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* +* High Level Configuration Options +* (easy to change) +*/ +#define CONFIG_SA1110 1/* This is an SA1100 CPU */ +#define CONFIG_JORNADA700 1/* on an HP Jornada 700 */ + +#undef CONFIG_USE_IRQ +/* we will never enable dcache, because we have to setup MMU first */ +#define CONFIG_SYS_NO_DCACHE + +#define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* +* Size of malloc() pool +*/ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128/* size rsrvd for initial data */ + +/* +* select serial console configuration +*/ +#define CONFIG_SA1100_SERIAL +#define CONFIG_SERIAL1 1/* we use SERIAL 1 on HP Jornada */ +#define CONFIG_SERIAL3 1/* needed? */ + +/* allow to overwrite serial and ethaddr */ +//#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 59600 + +/* +* Command line configuration. +*/ +#include <config_cmd_default.h> + +//#define CONFIG_CMD_DHCP + + +/* +* BOOTP options +*/ +//#define CONFIG_BOOTP_SUBNETMASK +//#define CONFIG_BOOTP_GATEWAY +//#define CONFIG_BOOTP_HOSTNAME +//#define CONFIG_BOOTP_BOOTPATH + +#define CONFIG_BOOTDELAY 10 +#define CONFIG_BOOTARGS "console=ttySA0,115200n8" +#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" +//#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ + +#if defined(CONFIG_CMD_KGDB ) +#define CONFIG_KGDB_BAUDRATE 59600/* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */ +#endif + +/* +* Miscellaneous configurable options +*/ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "HP Jornada # "/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16/* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0xc0400000/* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xc0800000/* 4 ... 8 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0xc0000000/* default load address */ + +#define CONFIG_SYS_HZ 3686400/* incrementer freq: 3.6864 MHz */ +#define CONFIG_SYS_CPUSPEED 0x0a/* set core clock to 206MHz */ + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- +* Stack sizes +* +* The stack sizes are set up in start.S using the settings below +*/ +#define CONFIG_STACKSIZE (128*1024)/* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024)/* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024)/* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- +* Physical Memory Map +*/ +#define CONFIG_NR_DRAM_BANKS 1/* we have 1 bank of SDRAM */ +#define PHYS_SDRAM_1 0xc0000000/* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000/* 32 MB */ + +#define PHYS_FLASH_1 0x00000000/* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x02000000/* 32 MB */ +#define PHYS_FLASH_BANK_SIZE 0x01000000/* 16 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00040000/* 256 KB sectors (x2) */ + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 KB for Monitor */ + +#if CONFIG_SYS_MONITOR_BASE <CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_RAMSTART +#endif + +/*----------------------------------------------------------------------- +* FLASH and environment organization +*/ + +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_SIZE +#define CONFIG_SYS_FLASH_CFI 1/* flash is CFI conformant */ +#define CONFIG_FLASH_CFI_DRIVER 1/* use common cfi driver */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1/* use buffered writes (20x faster) */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1/* max # of memory banks */ +#define CONFIG_SYS_FLASH_INCREMENT 0/* there is only one bank */ +#define CONFIG_SYS_MAX_FLASH_SECT 128/* max # of sectors on one chip */ +#undef CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +#define CONFIG_ENV_IS_IN_FLASH 1 + +#if defined(CONFIG_ENV_IS_IN_FLASH ) +#define CONFIG_ENV_IN_OWN_SECTOR 1 +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE) +#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE +#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE +#endif + +#endif /* __CONFIG_H */
Quoted 28 lines · On Wed, 02 Sep 2009 23:37:47 +0200 Wolfgang Denk <[email protected]> wrote:
Dear Kristoffer Ericson,
Quoted 7 lines · In message <[email protected]> you wrote:
Greetings,
Trying to get my Flashrom working (previously used blob with it).
I get this now :
c -Map u-boot.map -o u-boot
net/libnet.a(net.o)(.text+0x1cc): In function `ArpRequest':/home/kristoffer/work/projects/u-boot.git/net/net.c:250: undefined reference to `eth_send'...
Quoted 2 lines
My device shouldnt be using those at all so its no wonder that they are undefined, but the question is how I should get rid of those messages.
Don't enable network support in your board configuration? I. e. remove all command selections that require Ethenret to work...
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Substitute "damn" every time you're inclined to write "very"; your editor will delete it and the writing will be just as it should be. - Mark Twain
Signature · 1 line
Kristoffer Ericson <[email protected]>
Dear Kristoffer Ericson,
Quoted 3 lines · In message <[email protected]> you wrote:
Still having trouble finding exactly what is causing it. See below for my
include/configs/jornada.hfile.
...
include/configs/jornada.h line 68
Quoted 4 lines
include/configs/jornada.h new file +4
-0+/* +* Command line configuration. +*/ +#include <config_cmd_default.h>
This will include the default configuration, which has (among other things)
#define CONFIG_CMD_NET #define CONFIG_CMD_NFS
Try adding (after this #include):
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Insufficient facts always invite danger. -- Spock, "Space Seed", stardate 3141.9