load-balancing and cpu_power -v3
Subsystems (3)
cover load-balancing and cpu_power -v3
By popular demand the latest version of my patch queue on the subject ;-)
It has the aperf/mperf bits (although I haven't got an SMT capable machine to test).
It also includes a few wake_idle cleanups which seem to regress my kbuild test, so I'll have to prod a bit more at that.
Enjoy!
RFC PATCH 1/14 sched: restore __cpu_power to a straight sum of power
cpu_power is supposed to be a representation of the process capacity of the cpu, not a value to randomly tweak in order to affect placement.
Remove the placement hacks.
--- include/linux/sched.h | 1 + include/linux/topology.h | 1 + kernel/sched.c | 34 ++++++++++++++++++---------------- 3 files changed, 20 insertions(+), 16 deletions(-)
kernel/sched.c +12 -16
@@ -8468,15 +8468,13 @@ static void free_sched_groups(const stru* there are asymmetries in the topology. If there are asymmetries, group * having more cpu_power will pickup more load compared to the group having * less cpu_power. -* -* cpu_power will be a multiple of SCHED_LOAD_SCALE. This multiple represents -* the maximum number of tasks a group can handle in the presence of other idle -* or lightly loaded groups in the same sched domain. */ static void init_sched_groups_power (int cpu,struct sched_domain *sd) {struct sched_domain *child;struct sched_group *group; +long power; +int weight;WARN_ON (!sd || !sd->groups);
@@ -8487,22 +8485,20 @@ static void init_sched_groups_power(int sd->groups->__cpu_power =0 ; -/* -* For perf policy, if the groups in child domain share resources -* (for example cores sharing some portions of the cache hierarchy -* or SMT), then set this domain groups cpu_power such that each group -* can handle only one task, when there are other idle groups in the -* same sched domain. -*/ -if (!child || (!(sd->flags &SD_POWERSAVINGS_BALANCE ) && - (child->flags & - (SD_SHARE_CPUPOWER |SD_SHARE_PKG_RESOURCES )))) { -sg_inc_cpu_power (sd->groups,SCHED_LOAD_SCALE ); +if (!child) { + power =SCHED_LOAD_SCALE ; + weight =cpumask_weight (sched_domain_span (sd)); +/* +* SMT siblings share the power of a single core. +*/ +if ((sd->flags &SD_SHARE_CPUPOWER ) && weight >1 ) + power /= weight; +sg_inc_cpu_power (sd->groups, power);return ; }/* -* add cpu_power of each child group to this groups cpu_power +* Add cpu_power of each child group to this groups cpu_power. */ group = child->groups; do {
RFC PATCH 2/14 sched: SD_PREFER_SIBLING
In reply to Peter ZijlstraDo the placement thing using SD flags
XXX: consider degenerate bits
--- include/linux/sched.h | 29 +++++++++++++++-------------- kernel/sched.c | 14 +++++++++++++- 2 files changed, 28 insertions(+), 15 deletions(-)
include/linux/sched.h +15 -14
@@ -808,18 +808,19 @@ enum cpu_idle_type {#define SCHED_LOAD_SCALE_FUZZ SCHED_LOAD_SCALE#ifdef CONFIG_SMP -#define SD_LOAD_BALANCE 1/* Do load balancing on this domain. */ -#define SD_BALANCE_NEWIDLE 2/* Balance when about to become idle */ -#define SD_BALANCE_EXEC 4/* Balance on exec */ -#define SD_BALANCE_FORK 8/* Balance on fork, clone */ -#define SD_WAKE_IDLE 16/* Wake to idle CPU on task wakeup */ -#define SD_WAKE_AFFINE 32/* Wake task to waking CPU */ -#define SD_WAKE_BALANCE 64/* Perform balancing at task wakeup */ -#define SD_SHARE_CPUPOWER 128/* Domain members share cpu power */ -#define SD_POWERSAVINGS_BALANCE 256/* Balance for power savings */ -#define SD_SHARE_PKG_RESOURCES 512/* Domain members share cpu pkg resources */ -#define SD_SERIALIZE 1024/* Only a single load balancing instance */ -#define SD_WAKE_IDLE_FAR 2048/* Gain latency sacrificing cache hit */ +#define SD_LOAD_BALANCE 0x0001/* Do load balancing on this domain. */ +#define SD_BALANCE_NEWIDLE 0x0002/* Balance when about to become idle */ +#define SD_BALANCE_EXEC 0x0004/* Balance on exec */ +#define SD_BALANCE_FORK 0x0008/* Balance on fork, clone */ +#define SD_WAKE_IDLE 0x0010/* Wake to idle CPU on task wakeup */ +#define SD_WAKE_AFFINE 0x0020/* Wake task to waking CPU */ +#define SD_WAKE_BALANCE 0x0040/* Perform balancing at task wakeup */ +#define SD_SHARE_CPUPOWER 0x0080/* Domain members share cpu power */ +#define SD_POWERSAVINGS_BALANCE 0x0100/* Balance for power savings */ +#define SD_SHARE_PKG_RESOURCES 0x0200/* Domain members share cpu pkg resources */ +#define SD_SERIALIZE 0x0400/* Only a single load balancing instance */ +#define SD_WAKE_IDLE_FAR 0x0800/* Gain latency sacrificing cache hit */ +#define SD_PREFER_SIBLING 0x1000/* Prefer to place tasks in a sibling domain */ enum powersavings_balance_level { POWERSAVINGS_BALANCE_NONE = 0, /* No power saving load balance */
@@ -839,7 +840,7 @@ static inline int sd_balance_for_mc_poweif (sched_smt_power_savings)return SD_POWERSAVINGS_BALANCE ; -return 0 ; +return SD_PREFER_SIBLING ; }static inline int sd_balance_for_package_power (void )
@@ -847,7 +848,7 @@ static inline int sd_balance_for_packageif (sched_mc_power_savings | sched_smt_power_savings)return SD_POWERSAVINGS_BALANCE ; -return 0 ; +return SD_PREFER_SIBLING ; }/*
kernel/sched.c +13 -1
@@ -3803,9 +3803,13 @@ static inline void update_sd_lb_stats(st const struct cpumask *cpus, int *balance, struct sd_lb_stats *sds) { + struct sched_domain *child = sd->child;struct sched_group *group = sd->groups;struct sg_lb_stats sgs; -int load_idx; +int load_idx, prefer_sibling =0 ; + +if (child && child->flags &SD_PREFER_SIBLING ) + prefer_sibling =1 ;init_sd_power_savings_stats (sd, sds, idle); load_idx =get_sd_load_idx (sd, idle);
@@ -3825,6 +3829,14 @@ static inline void update_sd_lb_stats(st sds->total_load += sgs.group_load; sds->total_pwr += group->__cpu_power; +/* +* In case the child domain prefers tasks go to siblings +* first, lower the group capacity to one so that we'll try +* and move all the excess tasks away. +*/ +if (prefer_sibling) + sgs.group_capacity =1 ; +if (local_group) { sds->this_load = sgs.avg_load; sds->this = group;
RFC PATCH 3/14 sched: update the cpu_power sum during load-balance
In reply to Peter ZijlstraIn order to prepare for a more dynamic cpu_power, update the group sum while walking the sched domains during load-balance.
--- kernel/sched.c | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-)
kernel/sched.c +29 -4
@@ -3699,6 +3699,28 @@ static inline int check_power_save_busie }#endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */ +static void update_sched_power (struct sched_domain *sd) +{ +struct sched_domain *child = sd->child; +struct sched_group *group, *sdg = sd->groups; +unsigned long power = sdg->__cpu_power; + +if (!child) { +/* compute cpu power for this cpu */ +return ; + } + + sdg->__cpu_power =0 ; + + group = child->groups; +do { + sdg->__cpu_power += group->__cpu_power; + group = group->next; + }while (group != child->groups); + +if (power != sdg->__cpu_power) + sdg->reciprocal_cpu_power =reciprocal_value (sdg->__cpu_power); +}/** * update_sg_lb_stats - Update sched_group's statistics for load balancing.
@@ -3712,7 +3734,8 @@ static inline int check_power_save_busie* @balance: Should we balance. * @sgs: variable to hold the statistics for this group. */ -static inline void update_sg_lb_stats (struct sched_group *group,int this_cpu, +static inline void update_sg_lb_stats (struct sched_domain *sd, +struct sched_group *group,int this_cpu,enum cpu_idle_type idle,int load_idx,int *sd_idle,int local_group,const struct cpumask *cpus,int *balance,struct sg_lb_stats *sgs)
@@ -3723,8 +3746,11 @@ static inline void update_sg_lb_stats(stunsigned long sum_avg_load_per_task;unsigned long avg_load_per_task; -if (local_group) +if (local_group) { balance_cpu =group_first_cpu (group); +if (balance_cpu == this_cpu) +update_sched_power (sd); + }/* Tally up the load of all CPUs in the group */ sum_avg_load_per_task = avg_load_per_task =0 ;
@@ -3828,7 +3854,7 @@ static inline void update_sd_lb_stats(st local_group =cpumask_test_cpu (this_cpu,sched_group_cpus (group));memset (&sgs,0 ,sizeof (sgs)); -update_sg_lb_stats (group, this_cpu, idle, load_idx, sd_idle, +update_sg_lb_stats (sd, group, this_cpu, idle, load_idx, sd_idle, local_group, cpus, balance, &sgs);if (local_group && balance && !(*balance))
@@ -3863,7 +3889,6 @@ static inline void update_sd_lb_stats(stupdate_sd_power_savings_stats (group, sds, local_group, &sgs); group = group->next; }while (group != sd->groups); - }/**
RFC PATCH 4/14 sched: add smt_gain
In reply to Peter ZijlstraThe idea is that multi-threading a core yields more work capacity than a single thread, provide a way to express a static gain for threads.
--- include/linux/sched.h | 1 + include/linux/topology.h | 1 + kernel/sched.c | 8 +++++++- 3 files changed, 9 insertions(+), 1 deletion(-)
include/linux/sched.h +1 -0
@@ -930,6 +930,7 @@ struct sched_domain {unsigned int newidle_idx;unsigned int wake_idx;unsigned int forkexec_idx; +unsigned int smt_gain;int flags;/* See SD_* */ enum sched_domain_level level;
include/linux/topology.h +1 -0
@@ -99,6 +99,7 @@ int arch_update_cpu_topology(void); | SD_SHARE_CPUPOWER, \ .last_balance = jiffies, \ .balance_interval = 1, \ + .smt_gain = 1178, /* 15% */ \ }#endif #endif /* CONFIG_SCHED_SMT */
kernel/sched.c +7 -1
@@ -8490,9 +8490,15 @@ static void init_sched_groups_power(int weight =cpumask_weight (sched_domain_span (sd));/* * SMT siblings share the power of a single core. +* Usually multiple threads get a better yield out of +* that one core than a single thread would have, +* reflect that in sd->smt_gain. */ -if ((sd->flags &SD_SHARE_CPUPOWER ) && weight >1 ) +if ((sd->flags &SD_SHARE_CPUPOWER ) && weight >1 ) { + power *= sd->smt_gain; power /= weight; + power >>=SCHED_LOAD_SHIFT ; + }sg_inc_cpu_power (sd->groups, power);return ; }
RFC PATCH 5/14 sched: dynamic cpu_power
In reply to Peter ZijlstraRecompute the cpu_power for each cpu during load-balance
--- kernel/sched.c | 38 +++++++++++++++++++++++++++++++++++--- 1 file changed, 35 insertions(+), 3 deletions(-)
kernel/sched.c +35 -3
@@ -3691,14 +3691,46 @@ static inline int check_power_save_busie }#endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */ -static void update_sched_power (struct sched_domain *sd) +unsigned long __weak arch_smt_gain (struct sched_domain *sd,int cpu) +{ +unsigned long weight =cpumask_weight (sched_domain_span (sd)); +unsigned long smt_gain = sd->smt_gain; + + smt_gain /= weight; + +return smt_gain; +} + +static void update_cpu_power (struct sched_domain *sd,int cpu) +{ +unsigned long weight =cpumask_weight (sched_domain_span (sd)); +unsigned long power =SCHED_LOAD_SCALE ; +struct sched_group *sdg = sd->groups; +unsigned long old = sdg->__cpu_power; + +/* here we could scale based on cpufreq */ + +if ((sd->flags &SD_SHARE_CPUPOWER ) && weight >1 ) { + power *=arch_smt_gain (sd, cpu); + power >>=SCHED_LOAD_SHIFT ; + } + +/* here we could scale based on RT time */ + +if (power != old) { + sdg->__cpu_power = power; + sdg->reciprocal_cpu_power =reciprocal_value (power); + } +} + +static void update_group_power (struct sched_domain *sd,int cpu) {struct sched_domain *child = sd->child;struct sched_group *group, *sdg = sd->groups;unsigned long power = sdg->__cpu_power;if (!child) { -/* compute cpu power for this cpu */ +update_cpu_power (sd, cpu);return ; }
@@ -3743,7 +3775,7 @@ static inline void update_sg_lb_stats(stif (local_group) { balance_cpu =group_first_cpu (group);if (balance_cpu == this_cpu) -update_sched_power (sd); +update_group_power (sd, this_cpu); }/* Tally up the load of all CPUs in the group */
RFC PATCH 6/14 sched: scale down cpu_power due to RT tasks
In reply to Peter ZijlstraKeep an average on the amount of time spend on RT tasks and use that fraction to scale down the cpu_power for regular tasks.
--- include/linux/sched.h | 1 kernel/sched.c | 64 +++++++++++++++++++++++++++++++++++++++++++++++--- kernel/sched_rt.c | 6 +--- kernel/sysctl.c | 8 ++++++ 4 files changed, 72 insertions(+), 7 deletions(-)
include/linux/sched.h +1 -0
@@ -1863,6 +1863,7 @@ extern unsigned int sysctl_sched_child_rextern unsigned int sysctl_sched_features;extern unsigned int sysctl_sched_migration_cost;extern unsigned int sysctl_sched_nr_migrate; +extern unsigned int sysctl_sched_time_avg;extern unsigned int sysctl_timer_migration; int sched_nr_latency_handler(struct ctl_table *table, int write,
kernel/sched.c +61 -3
109 lines not on this page · raw message
kernel/sched_rt.c +2 -4
@@ -615,6 +615,8 @@ static void update_curr_rt(struct rq *rq curr->se.exec_start = rq->clock;cpuacct_charge (curr, delta_exec); +sched_rt_avg_update (rq, delta_exec); +if (!rt_bandwidth_enabled ())return ;
@@ -887,8 +889,6 @@ static void enqueue_task_rt(struct rq *rif (!task_current (rq, p) && p->rt.nr_cpus_allowed >1 )enqueue_pushable_task (rq, p); - -inc_cpu_load (rq, p->se.load.weight); }static void dequeue_task_rt (struct rq *rq,struct task_struct *p,int sleep)
@@ -899,8 +899,6 @@ static void dequeue_task_rt(struct rq *rdequeue_rt_entity (rt_se);dequeue_pushable_task (rq, p); - -dec_cpu_load (rq, p->se.load.weight); }/*
kernel/sysctl.c +8 -0
@@ -332,6 +332,14 @@ static struct ctl_table kern_table[] = { }, { .ctl_name = CTL_UNNUMBERED, + .procname = "sched_time_avg", + .data = &sysctl_sched_time_avg, + .maxlen = sizeof(unsigned int), + .mode = 0644, + .proc_handler = &proc_dointvec, + }, + { + .ctl_name = CTL_UNNUMBERED, .procname = "timer_migration", .data = &sysctl_timer_migration, .maxlen = sizeof(unsigned int),
RFC PATCH 7/14 sched: try to deal with low capacity
In reply to Peter ZijlstraWhen the capacity drops low, we want to migrate load away. Allow the load-balancer to remove all tasks when we hit rock bottom.
--- kernel/sched.c | 35 +++++++++++++++++++++++++++++------ 1 file changed, 29 insertions(+), 6 deletions(-)
kernel/sched.c +29 -6
@@ -3668,7 +3668,7 @@ static inline void update_sd_power_savin* capacity but still has some space to pick up some load * from other group and save more power */ -if (sgs->sum_nr_running > sgs->group_capacity -1 ) +if (sgs->sum_nr_running +1 > sgs->group_capacity)return ; if (sgs->sum_nr_running > sds->leader_nr_running ||
@@ -3908,8 +3908,8 @@ static inline void update_sg_lb_stats(stif ((max_cpu_load - min_cpu_load) >2 *avg_load_per_task) sgs->group_imb =1 ; - sgs->group_capacity = group->__cpu_power /SCHED_LOAD_SCALE ; - + sgs->group_capacity = +DIV_ROUND_CLOSEST (group->__cpu_power,SCHED_LOAD_SCALE ); }/**
@@ -3959,7 +3959,7 @@ static inline void update_sd_lb_stats(st* and move all the excess tasks away. */ if (prefer_sibling) - sgs.group_capacity =1 ; + sgs.group_capacity =min (sgs.group_capacity,1UL );if (local_group) { sds->this_load = sgs.avg_load;
@@ -4191,6 +4191,26 @@ ret:return NULL ; } +static struct sched_group *group_of (int cpu) +{ +struct sched_domain *sd =rcu_dereference (cpu_rq (cpu)->sd); + +if (!sd) +return NULL ; + +return sd->groups; +} + +static unsigned long power_of (int cpu) +{ +struct sched_group *group =group_of (cpu); + +if (!group) +return SCHED_LOAD_SCALE ; + +return group->__cpu_power; +} +/* * find_busiest_queue - find the busiest runqueue among the cpus in group. */
@@ -4203,15 +4223,18 @@ find_busiest_queue(struct sched_group *gint i;for_each_cpu (i,sched_group_cpus (group)) { +unsigned long power =power_of (i); +unsigned long capacity =DIV_ROUND_CLOSEST (power,SCHED_LOAD_SCALE );unsigned long wl;if (!cpumask_test_cpu (i, cpus))continue ; rq =cpu_rq (i); - wl =weighted_cpuload (i); + wl =weighted_cpuload (i) *SCHED_LOAD_SCALE ; + wl /= power; -if (rq->nr_running ==1 && wl > imbalance) +if (capacity && rq->nr_running ==1 && wl > imbalance)continue ;if (wl > max_load) {
RFC PATCH 8/14 sched: remove reciprocal for cpu_power
In reply to Peter ZijlstraIts a source of fail, also, now that cpu_power is dynamical, its a waste of time.
before:
<idle>-0 [000] 132.877936: find_busiest_group: avg_load: 0 group_load: 8241 power: 1
after:
bash-1689 [001] 137.862151: find_busiest_group: avg_load: 10636288 group_load: 10387 power: 1
--- include/linux/sched.h | 10 +---- kernel/sched.c | 100 +++++++++++++++++--------------------------------- 2 files changed, 36 insertions(+), 74 deletions(-)
kernel/sched.c +34 -66
@@ -120,30 +120,8 @@*/ #define RUNTIME_INF ((u64)~0ULL) -#ifdef CONFIG_SMP -static void double_rq_lock (struct rq *rq1,struct rq *rq2); -/* -* Divide a load by a sched group cpu_power : (load / sg->__cpu_power) -* Since cpu_power is a 'constant', we can use a reciprocal divide. -*/ -static inline u32 sg_div_cpu_power (const struct sched_group *sg,u32 load) -{ -return reciprocal_divide (load, sg->reciprocal_cpu_power); -} - -/* -* Each time a sched group cpu_power is changed, -* we must compute its reciprocal value -*/ -static inline void sg_inc_cpu_power (struct sched_group *sg,u32 val) -{ - sg->__cpu_power += val; - sg->reciprocal_cpu_power =reciprocal_value (sg->__cpu_power); -} -#endif -static inline int rt_policy (int policy) {if (unlikely (policy ==SCHED_FIFO || policy ==SCHED_RR ))
@@ -2335,8 +2313,7 @@ find_idlest_group(struct sched_domain *s }/* Adjust by relative CPU power of the group */ - avg_load =sg_div_cpu_power (group, - avg_load *SCHED_LOAD_SCALE ); + avg_load = (avg_load *SCHED_LOAD_SCALE ) / group->cpu_power;if (local_group) { this_load = avg_load;
@@ -3768,7 +3745,6 @@ static void update_cpu_power(struct scheunsigned long weight =cpumask_weight (sched_domain_span (sd));unsigned long power =SCHED_LOAD_SCALE ;struct sched_group *sdg = sd->groups; -unsigned long old = sdg->__cpu_power;/* here we could scale based on cpufreq */
@@ -3783,33 +3759,26 @@ static void update_cpu_power(struct scheif (!power) power =1 ; -if (power != old) { - sdg->__cpu_power = power; - sdg->reciprocal_cpu_power =reciprocal_value (power); - } + sdg->cpu_power = power; }static void update_group_power (struct sched_domain *sd,int cpu) {struct sched_domain *child = sd->child;struct sched_group *group, *sdg = sd->groups; -unsigned long power = sdg->__cpu_power;if (!child) {update_cpu_power (sd, cpu);return ; } - sdg->__cpu_power =0 ; + sdg->cpu_power =0 ; group = child->groups;do { - sdg->__cpu_power += group->__cpu_power; + sdg->cpu_power += group->cpu_power; group = group->next; }while (group != child->groups); - -if (power != sdg->__cpu_power) - sdg->reciprocal_cpu_power =reciprocal_value (sdg->__cpu_power); }/**
@@ -3889,8 +3858,7 @@ static inline void update_sg_lb_stats(st }/* Adjust by relative CPU power of the group */ - sgs->avg_load =sg_div_cpu_power (group, - sgs->group_load *SCHED_LOAD_SCALE ); + sgs->avg_load = (sgs->group_load *SCHED_LOAD_SCALE ) / group->cpu_power;/*
@@ -3902,14 +3870,14 @@ static inline void update_sg_lb_stats(st* normalized nr_running number somewhere that negates * the hierarchy? */ - avg_load_per_task =sg_div_cpu_power (group, - sum_avg_load_per_task *SCHED_LOAD_SCALE ); + avg_load_per_task = (sum_avg_load_per_task *SCHED_LOAD_SCALE ) / + group->cpu_power;if ((max_cpu_load - min_cpu_load) >2 *avg_load_per_task) sgs->group_imb =1 ; sgs->group_capacity = -DIV_ROUND_CLOSEST (group->__cpu_power,SCHED_LOAD_SCALE ); +DIV_ROUND_CLOSEST (group->cpu_power,SCHED_LOAD_SCALE ); }/**
@@ -3951,7 +3919,7 @@ static inline void update_sd_lb_stats(streturn ; sds->total_load += sgs.group_load; - sds->total_pwr += group->__cpu_power; + sds->total_pwr += group->cpu_power;/* * In case the child domain prefers tasks go to siblings
@@ -4016,28 +3984,28 @@ static inline void fix_small_imbalance(s* moving them. */ - pwr_now += sds->busiest->__cpu_power * + pwr_now += sds->busiest->cpu_power *min (sds->busiest_load_per_task, sds->max_load); - pwr_now += sds->this->__cpu_power * + pwr_now += sds->this->cpu_power *min (sds->this_load_per_task, sds->this_load); pwr_now /=SCHED_LOAD_SCALE ;/* Amount of load we'd subtract */ - tmp =sg_div_cpu_power (sds->busiest, - sds->busiest_load_per_task *SCHED_LOAD_SCALE ); + tmp = (sds->busiest_load_per_task *SCHED_LOAD_SCALE ) / + sds->busiest->cpu_power;if (sds->max_load > tmp) - pwr_move += sds->busiest->__cpu_power * + pwr_move += sds->busiest->cpu_power *min (sds->busiest_load_per_task, sds->max_load - tmp);/* Amount of load we'd add */ -if (sds->max_load * sds->busiest->__cpu_power < +if (sds->max_load * sds->busiest->cpu_power < sds->busiest_load_per_task *SCHED_LOAD_SCALE ) - tmp =sg_div_cpu_power (sds->this, - sds->max_load * sds->busiest->__cpu_power); + tmp = (sds->max_load * sds->busiest->cpu_power) / + sds->this->cpu_power;else - tmp =sg_div_cpu_power (sds->this, - sds->busiest_load_per_task *SCHED_LOAD_SCALE ); - pwr_move += sds->this->__cpu_power * + tmp = (sds->busiest_load_per_task *SCHED_LOAD_SCALE ) / + sds->this->cpu_power; + pwr_move += sds->this->cpu_power *min (sds->this_load_per_task, sds->this_load + tmp); pwr_move /=SCHED_LOAD_SCALE ;
@@ -4072,8 +4040,8 @@ static inline void calculate_imbalance(s sds->max_load - sds->busiest_load_per_task);/* How much load to actually move to equalise the imbalance */ - *imbalance =min (max_pull * sds->busiest->__cpu_power, - (sds->avg_load - sds->this_load) * sds->this->__cpu_power) + *imbalance =min (max_pull * sds->busiest->cpu_power, + (sds->avg_load - sds->this_load) * sds->this->cpu_power) /SCHED_LOAD_SCALE ;/*
@@ -4208,7 +4176,7 @@ static unsigned long power_of(int cpu)if (!group)return SCHED_LOAD_SCALE ; -return group->__cpu_power; +return group->cpu_power; }/*
@@ -7934,7 +7902,7 @@ static int sched_domain_debug_one(structbreak ; } -if (!group->__cpu_power) { +if (!group->cpu_power) {printk (KERN_CONT "\n" );printk (KERN_ERR "ERROR: domain->cpu_power not " "set\n" );
@@ -7958,9 +7926,9 @@ static int sched_domain_debug_one(structcpulist_scnprintf (str,sizeof (str),sched_group_cpus (group));printk (KERN_CONT " %s" , str); -if (group->__cpu_power !=SCHED_LOAD_SCALE ) { -printk (KERN_CONT " (__cpu_power = %d)" , - group->__cpu_power); +if (group->cpu_power !=SCHED_LOAD_SCALE ) { +printk (KERN_CONT " (cpu_power = %d)" , + group->cpu_power); } group = group->next;
@@ -8245,7 +8213,7 @@ init_sched_build_groups(const struct cpucontinue ;cpumask_clear (sched_group_cpus (sg)); - sg->__cpu_power =0 ; + sg->cpu_power =0 ;for_each_cpu (j, span) {if (group_fn (j, cpu_map,NULL , tmpmask) != group)
@@ -8503,7 +8471,7 @@ static void init_numa_sched_groups_powercontinue ; } -sg_inc_cpu_power (sg, sd->groups->__cpu_power); + sg->cpu_power += sd->groups->cpu_power; } sg = sg->next; }while (sg != group_head);
@@ -8540,7 +8508,7 @@ static int build_numa_sched_groups(struc sd->groups = sg; } - sg->__cpu_power =0 ; + sg->cpu_power =0 ;cpumask_copy (sched_group_cpus (sg), d->nodemask); sg->next = sg;cpumask_or (d->covered, d->covered, d->nodemask);
@@ -8563,7 +8531,7 @@ static int build_numa_sched_groups(struc "Can not alloc domain group for node %d\n", j);return -ENOMEM ; } - sg->__cpu_power =0 ; + sg->cpu_power =0 ;cpumask_copy (sched_group_cpus (sg), d->tmpmask); sg->next = prev->next;cpumask_or (d->covered, d->covered, d->tmpmask);
@@ -8641,7 +8609,7 @@ static void init_sched_groups_power(int child = sd->child; - sd->groups->__cpu_power =0 ; + sd->groups->cpu_power =0 ;if (!child) { power =SCHED_LOAD_SCALE ;
@@ -8657,7 +8625,7 @@ static void init_sched_groups_power(int power /= weight; power >>=SCHED_LOAD_SHIFT ; } -sg_inc_cpu_power (sd->groups, power); + sd->groups->cpu_power += power;return ; }
@@ -8666,7 +8634,7 @@ static void init_sched_groups_power(int*/ group = child->groups;do { -sg_inc_cpu_power (sd->groups, group->__cpu_power); + sd->groups->cpu_power += group->cpu_power; group = group->next; }while (group != child->groups); }
include/linux/sched.h +2 -8
@@ -870,15 +870,9 @@ struct sched_group {/* * CPU power of this group, SCHED_LOAD_SCALE being max power for a -* single CPU. This is read only (except for setup, hotplug CPU). -* Note : Never change cpu_power without recompute its reciprocal +* single CPU. */ -unsigned int __cpu_power; -/* -* reciprocal value of cpu_power to avoid expensive divides -* (see include/linux/reciprocal_div.h) -*/ -u32 reciprocal_cpu_power; +unsigned int cpu_power;/* * The CPUs this group covers.
Re: [RFC][PATCH 08/14] sched: remove reciprocal for cpu_power
Quoted 1 line · Peter Zijlstra
[[email protected]: remove include]
/me reminds himself to quilt refresh before sending email, not after.
RFC PATCH 9/14 x86: move APERF/MPERF into a X86_FEATURE
In reply to Peter ZijlstraMove the APERFMPERF capacility into a X86_FEATURE flag so that it can be used outside of the acpi cpufreq driver.
--- arch/x86/include/asm/cpufeature.h | 1 + arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 9 ++------- arch/x86/kernel/cpu/intel.c | 6 ++++++ 3 files changed, 9 insertions(+), 7 deletions(-)
arch/x86/include/asm/cpufeature.h +1 -0
@@ -95,6 +95,7 @@#define X86_FEATURE_NONSTOP_TSC (3*32+24)/* TSC does not stop in C states */ #define X86_FEATURE_CLFLUSH_MONITOR (3*32+25)/* "" clflush reqd with monitor */ #define X86_FEATURE_EXTD_APICID (3*32+26)/* has extended APICID (8 bits) */ +#define X86_FEATURE_APERFMPERF (3*32+27)/* APERFMPERF */ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ #define X86_FEATURE_XMM3 (4*32+ 0)/* "pni" SSE-3 */
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +2 -7
@@ -60,7 +60,6 @@ enum { };#define INTEL_MSR_RANGE (0xffff) -#define CPUID_6_ECX_APERFMPERF_CAPABILITY (0x1)struct acpi_cpufreq_data {struct acpi_processor_performance *acpi_data;
@@ -731,12 +730,8 @@ static int acpi_cpufreq_cpu_init(structacpi_processor_notify_smm (THIS_MODULE );/* Check for APERF/MPERF support in hardware */ -if (c->x86_vendor ==X86_VENDOR_INTEL && c->cpuid_level >=6 ) { -unsigned int ecx; - ecx =cpuid_ecx (6 ); -if (ecx &CPUID_6_ECX_APERFMPERF_CAPABILITY ) - acpi_cpufreq_driver.getavg = get_measured_perf; - } +if (cpu_has (c,X86_FEATURE_APERFMPERF )) + acpi_cpufreq_driver.getavg = get_measured_perf;dprintk ("CPU%u - ACPI performance management activated.\n" , cpu);for (i =0 ; i < perf->state_count; i++)
arch/x86/kernel/cpu/intel.c +6 -0
@@ -350,6 +350,12 @@ static void __cpuinit init_intel(structset_cpu_cap (c,X86_FEATURE_ARCH_PERFMON ); } +if (c->cpuid_level >6 ) { +unsigned ecx =cpuid_ecx (6 ); +if (ecx &0x01 ) +set_cpu_cap (c,X86_FEATURE_APERFMPERF ); + } +if (cpu_has_xmm2)set_cpu_cap (c,X86_FEATURE_LFENCE_RDTSC );if (cpu_has_ds) {
RFC PATCH 10/14 x86: generic aperf/mperf code.
In reply to Peter ZijlstraMove some of the aperf/mperf code out from the cpufreq driver thingy so that other people can enjoy it too.
--- arch/x86/include/asm/processor.h | 12 ++++++++ arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 41 +++++++++-------------------- 2 files changed, 26 insertions(+), 27 deletions(-)
arch/x86/include/asm/processor.h +12 -0
@@ -1000,4 +1000,16 @@ extern void start_thread(struct pt_regsextern int get_tsc_mode (unsigned long adr);extern int set_tsc_mode (unsigned int val); +struct aperfmperf { +u64 aperf, mperf; +}; + +static inline void get_aperfmperf (struct aperfmperf *am) +{ +WARN_ON_ONCE (!boot_cpu_has (X86_FEATURE_APERFMPERF )); + +rdmsrl (MSR_IA32_APERF , am->aperf); +rdmsrl (MSR_IA32_MPERF , am->mperf); +} +#endif /* _ASM_X86_PROCESSOR_H */
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +14 -27
78 lines not on this page · raw message
Re: [RFC][PATCH 10/14] x86: generic aperf/mperf code.
Quoted 12 lines · On Thursday 03 September 2009 15:21:55 Peter Zijlstra wrote:
Move some of the aperf/mperf code out from the cpufreq driver thingy so that other people can enjoy it too.
Signed-off-by Peter Zijlstra <[email protected]>Cc H. Peter Anvin <[email protected]>Cc Ingo Molnar <[email protected]>Cc Venkatesh Pallipadi <[email protected]>Cc Yanmin <[email protected]>Cc Dave Jones <[email protected]>Cc Len Brown <[email protected]>Cc Yinghai Lu <[email protected]>
Quoted 3 lines
--- arch/x86/include/asm/processor.h | 12 ++++++++ arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 41
+++++++++--------------------
Quoted 54 lines
2 files changed, 26 insertions(+), 27 deletions(-)Index:
linux-2.6/arch/x86/include/asm/processor.h
===================================================================arch/x86/include/asm/processor.h +12
-0@@ -1000,4 +1000,16 @@ extern void start_thread(struct pt_regsextern int get_tsc_mode (unsigned long adr);extern int set_tsc_mode (unsigned int val); +struct aperfmperf { +u64 aperf, mperf; +}; + +static inline void get_aperfmperf (struct aperfmperf *am) +{ +WARN_ON_ONCE (!boot_cpu_has (X86_FEATURE_APERFMPERF )); + +rdmsrl (MSR_IA32_APERF , am->aperf); +rdmsrl (MSR_IA32_MPERF , am->mperf); +} +#endif /* _ASM_X86_PROCESSOR_H */ Index:
linux-2.6/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
===================================================================arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +2
-13@@ -243,23 +243,12 @@ static u32 get_cur_val(const struct cpumreturn cmd.val; } -struct perf_pair { -union { -struct { -u32 lo; -u32 hi; - } split; -u64 whole; - } aperf, mperf; -}; -/* Called via smp_call_function_single(), on the target CPU */ static void read_measured_perf_ctrs (void *_cur) { -struct perf_pair *cur = _cur; +struct aperfmperf *am = _cur; -rdmsr (MSR_IA32_APERF , cur->aperf.split.lo, cur->aperf.split.hi); -rdmsr (MSR_IA32_MPERF , cur->mperf.split.lo, cur->mperf.split.hi); +get_aperfmperf (am); }/*
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c static void read_measured_perf_ctrs(void · line 274
Quoted 9 lines
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +1
-1@@ -278,19 +267,17 @@ static void read_measured_perf_ctrs(voidstatic unsigned int get_measured_perf (struct cpufreq_policy *policy,unsigned int cpu) { -struct perf_pair readin, cur; +struct aperfmperf readin, cur;unsigned int perf_percent;unsigned int retval; if (smp_call_function_single(cpu, read_measured_perf_ctrs, &readin,
1))
Quoted 16 lines
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +4
-6return 0 ; - cur.aperf.whole = readin.aperf.whole - -per_cpu (msr_data, cpu).saved_aperf; - cur.mperf.whole = readin.mperf.whole - -per_cpu (msr_data, cpu).saved_mperf; -per_cpu (msr_data, cpu).saved_aperf = readin.aperf.whole; -per_cpu (msr_data, cpu).saved_mperf = readin.mperf.whole; + cur.aperf = readin.aperf -per_cpu (msr_data, cpu).saved_aperf; + cur.mperf = readin.mperf -per_cpu (msr_data, cpu).saved_mperf; +per_cpu (msr_data, cpu).saved_aperf = readin.aperf; +per_cpu (msr_data, cpu).saved_mperf = readin.mperf;#ifdef __i386__/*
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c static unsigned int get_measured_perf(st · line 292
Quoted 1 line
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +0
-0@@ -305,8 +292,8 @@ static unsigned int get_measured_perf(st h =max_t (u32, cur.aperf.split.hi, cur.mperf.split.hi);
You still use struct perf_pair split/hi/lo members in #ifdef __i386__ case which you deleted above.
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c static unsigned int get_measured_perf(st · line 299
Quoted 9 lines
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +2
-2shift_count =fls (h); - cur.aperf.whole >>= shift_count; - cur.mperf.whole >>= shift_count; + cur.aperf >>= shift_count; + cur.mperf >>= shift_count; }if (((unsigned long )(-1 ) /100 ) < cur.aperf.split.lo) {
Same here, possibly still elsewhere.
Is this only x86_64 compile tested?
Thomas
Quoted 28 lines
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +5
-5@@ -321,14 +308,14 @@ static unsigned int get_measured_perf(st perf_percent =0 ;#else -if (unlikely (((unsigned long )(-1 ) /100 ) < cur.aperf.whole)) { +if (unlikely (((unsigned long )(-1 ) /100 ) < cur.aperf)) {int shift_count =7 ; - cur.aperf.whole >>= shift_count; - cur.mperf.whole >>= shift_count; + cur.aperf >>= shift_count; + cur.mperf >>= shift_count; } -if (cur.aperf.whole && cur.mperf.whole) - perf_percent = (cur.aperf.whole *100 ) / cur.mperf.whole; +if (cur.aperf && cur.mperf) + perf_percent = (cur.aperf *100 ) / cur.mperf;else perf_percent =0 ;Signature · 6 lines
-- -- To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [RFC][PATCH 10/14] x86: generic aperf/mperf code.
Quoted 11 lines · Thomas Renninger
You still use struct
perf_pairsplit/hi/lo members in #ifdef__i386__case which you deleted above.Quoted 8 lines
shift_count = fls(h);arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +2
-2- cur.aperf.whole >>= shift_count; - cur.mperf.whole >>= shift_count; + cur.aperf >>= shift_count; + cur.mperf >>= shift_count; }
Quoted 3 lines
Quoted 1 line
if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) {Same here, possibly still elsewhere.
Is this onlyx86_64compile tested?
Of course, who still has 32bit only hardware anyway ;-)
Will fix, thanks for spotting that.
Peter Zijlstra
maintainerRe: [RFC][PATCH 10/14] x86: generic aperf/mperf code.
Quoted 12 lines · Peter Zijlstra
Quoted 11 lines · Thomas Renninger
You still use struct
perf_pairsplit/hi/lo members in #ifdef__i386__case which you deleted above.Quoted 8 lines
shift_count = fls(h);arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +2
-2- cur.aperf.whole >>= shift_count; - cur.mperf.whole >>= shift_count; + cur.aperf >>= shift_count; + cur.mperf >>= shift_count; }
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) {Same here, possibly still elsewhere.
Is this onlyx86_64compile tested?Of course, who still has 32bit only hardware anyway ;-)
Will fix, thanks for spotting that.
Hrmm, on that, does it really make sense to maintain the i386 code path?
How frequently is that code called and what i386 only chips support aperf/mperf, atom?
Re: [RFC][PATCH 10/14] x86: generic aperf/mperf code.
Quoted 3 lines · On Friday 04 September 2009 11:27:19 Peter Zijlstra wrote:
Quoted 2 lines · Peter Zijlstra
Quoted 1 line · Thomas Renninger
You still use struct
perf_pairsplit/hi/lo members in #ifdef
__i386__
Quoted 16 lines
Quoted 16 lines
Quoted 10 lines
case which you deleted above.
Quoted 8 lines
shift_count = fls(h);arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +2
-2- cur.aperf.whole >>= shift_count; - cur.mperf.whole >>= shift_count; + cur.aperf >>= shift_count; + cur.mperf >>= shift_count; }Quoted 3 lines
Quoted 1 line
if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) {Same here, possibly still elsewhere.
Is this onlyx86_64compile tested?Of course, who still has 32bit only hardware anyway ;-)
Quoted 7 lines
Quoted 1 line
Will fix, thanks for spotting that.
Hrmm, on that, does it really make sense to maintain the i386 code path?
How frequently is that code called and what i386 only chips support aperf/mperf, atom?
Venki should know best.
Thomas
Re: [RFC][PATCH 10/14] x86: generic aperf/mperf code.
In reply to Peter ZijlstraQuoted 17 lines · Peter Zijlstra
Quoted 16 lines · Peter Zijlstra
Quoted 14 lines · Thomas Renninger
You still use struct
perf_pairsplit/hi/lo members in #ifdef__i386__case which you deleted above.arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c static unsigned int get_measured_perf(st · line 299
Quoted 9 lines
shift_count = fls(h);arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +2
-2- cur.aperf.whole >>= shift_count; - cur.mperf.whole >>= shift_count; + cur.aperf >>= shift_count; + cur.mperf >>= shift_count; }if (((unsigned long )(-1 ) /100 ) < cur.aperf.split.lo) {Same here, possibly still elsewhere.
Is this onlyx86_64compile tested?
Quoted 8 lines
Quoted 3 lines
Of course, who still has 32bit only hardware anyway ;-)
Will fix, thanks for spotting that.
Hrmm, on that, does it really make sense to maintain the i386 code path?
How frequently is that code called and what i386 only chips support aperf/mperf, atom?
any 64-bit cpu that supports it can have a 32bit kernel installed on it. (and a significant number of users actually do this).
Dave
Peter Zijlstra
maintainerRe: [RFC][PATCH 10/14] x86: generic aperf/mperf code.
Quoted 22 lines · Dave Jones
Quoted 21 lines · Peter Zijlstra
Quoted 19 lines · Peter Zijlstra
Quoted 11 lines · Thomas Renninger
You still use struct
perf_pairsplit/hi/lo members in #ifdef__i386__case which you deleted above.Quoted 8 lines
shift_count = fls(h);arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +2
-2- cur.aperf.whole >>= shift_count; - cur.mperf.whole >>= shift_count; + cur.aperf >>= shift_count; + cur.mperf >>= shift_count; }Quoted 3 lines
Quoted 1 line
if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) {Same here, possibly still elsewhere.
Is this onlyx86_64compile tested?Of course, who still has 32bit only hardware anyway ;-)
Will fix, thanks for spotting that.
Quoted 7 lines
Quoted 4 lines
Hrmm, on that, does it really make sense to maintain the i386 code path?
How frequently is that code called and what i386 only chips support aperf/mperf, atom?
any 64-bit cpu that supports it can have a 32bit kernel installed on it. (and a significant number of users actually do this).
1) we really should be pushing those people to run 64bit kernels
[ I'm still hoping distros will start shipping 64bit kernels and have
the bootloader pick the 64bit one when the hardware supports lm ]
2) those cpus aren't real bad at 64bit divisions :-)
H. Peter Anvin
reviewerRe: [RFC][PATCH 10/14] x86: generic aperf/mperf code.
Quoted 9 lines · Peter Zijlstra
Quoted 3 lines
any 64-bit cpu that supports it can have a 32bit kernel installed on it. (and a significant number of users actually do this).
1) we really should be pushing those people to run 64bit kernels
[ I'm still hoping distros will start shipping 64bit kernels and have
the bootloader pick the 64bit one when the hardware supports lm ]
FWIW, there is already support in Syslinux to do that.
If what distros want is a single kernel image that can boot into either mode, that might be an interesting enhancement to wraplinux.
-hpa
RFC PATCH 11/14 sched: provide arch_scale_freq_power
In reply to Peter ZijlstraProvide an ach specific hook for cpufreq based scaling of cpu_power.
--- kernel/sched.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)
kernel/sched.c +19 -2
@@ -3712,7 +3712,18 @@ static inline int check_power_save_busie }#endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */ -unsigned long __weak arch_scale_smt_power (struct sched_domain *sd,int cpu) + +unsigned long default_scale_freq_power (struct sched_domain *sd,int cpu) +{ +return SCHED_LOAD_SCALE ; +} + +unsigned long __weak arch_scale_freq_power (struct sched_domain *sd,int cpu) +{ +return default_scale_freq_power (sd, cpu); +} + +unsigned long default_scale_smt_power (struct sched_domain *sd,int cpu) {unsigned long weight =cpumask_weight (sched_domain_span (sd));unsigned long smt_gain = sd->smt_gain;
@@ -3722,6 +3733,11 @@ unsigned long __weak arch_scale_smt_powereturn smt_gain; } +unsigned long __weak arch_scale_smt_power (struct sched_domain *sd,int cpu) +{ +return default_scale_smt_power (sd, cpu); +} +unsigned long scale_rt_power (int cpu) {struct rq *rq =cpu_rq (cpu);
@@ -3746,7 +3762,8 @@ static void update_cpu_power(struct scheunsigned long power =SCHED_LOAD_SCALE ;struct sched_group *sdg = sd->groups; -/* here we could scale based on cpufreq */ + power *=arch_scale_freq_power (sd, cpu); + power >>SCHED_LOAD_SHIFT ;if ((sd->flags &SD_SHARE_CPUPOWER ) && weight >1 ) { power *=arch_scale_smt_power (sd, cpu);
RFC PATCH 12/14 x86: sched: provide arch implementations using aperf/mperf
In reply to Peter ZijlstraAPERF/MPERF support for cpu_power.
APERF/MPERF is arch defined to be a relative scale of work capacity per logical cpu, this is assumed to include SMT and Turbo mode.
APERF/MPERF are specified to both reset to 0 when either counter wraps, which is highly inconvenient, since that'll give a blimp when that happens. The manual specifies writing 0 to the counters after each read, but that's 1) too expensive, and 2) destroys the possibility of sharing these counters with other users, so we live with the blimp - the other existing user does too.
--- arch/x86/kernel/cpu/Makefile | 2 - arch/x86/kernel/cpu/sched.c | 58 +++++++++++++++++++++++++++++++++++++++++++ include/linux/sched.h | 4 ++ 3 files changed, 63 insertions(+), 1 deletion(-)
arch/x86/kernel/cpu/Makefile +1 -1
@@ -13,7 +13,7 @@ CFLAGS_common.o := $(nostackp) obj-y := intel_cacheinfo.o addon_cpuid_features.o obj-y += proc.o capflags.o powerflags.o common.o -obj-y += vmware.o hypervisor.o +obj-y += vmware.o hypervisor.o sched.o obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o obj-$(CONFIG_X86_64) += bugs_64.o
arch/x86/kernel/cpu/sched.c new file +58 -0
58 lines not on this page · raw message
include/linux/sched.h +4 -0
@@ -1012,6 +1012,10 @@ partition_sched_domains(int ndoms_new, s }#endif /* !CONFIG_SMP */ + +unsigned long default_scale_freq_power (struct sched_domain *sd,int cpu); +unsigned long default_scale_smt_power (struct sched_domain *sd,int cpu); +struct io_context ;/* See blkdev.h */
RFC PATCH 13/14 sched: cleanup wake_idle power saving
In reply to Peter ZijlstraHopefully a more readable version of the same.
--- kernel/sched_fair.c | 58 ++++++++++++++++++++++++++++++++++------------------ 1 file changed, 39 insertions(+), 19 deletions(-)
kernel/sched_fair.c +39 -19
@@ -1062,29 +1062,49 @@ static void yield_task_fair(struct rq *r#define cpu_rd_active (cpu, rq) cpumask_test_cpu(cpu, rq->rd->online) +/* +* At POWERSAVINGS_BALANCE_WAKEUP level, if both this_cpu and prev_cpu +* are idle and this is not a kernel thread and this task's affinity +* allows it to be moved to preferred cpu, then just move! +* +* XXX - can generate significant overload on perferred_wakeup_cpu +* with plenty of idle cpus, leading to a significant loss in +* throughput. +* +* Returns: < 0 - no placement decision made +* >= 0 - place on cpu +*/ +static int wake_idle_power_save (int cpu,struct task_struct *p) +{ +int this_cpu =smp_processor_id (); +int wakeup_cpu; + +if (sched_mc_power_savings <POWERSAVINGS_BALANCE_WAKEUP ) +return -1 ; + +if (!idle_cpu (cpu) || !idle_cpu (this_cpu)) +return -1 ; + +if (!p->mm || (p->flags &PF_KTHREAD )) +return -1 ; + + wakeup_cpu =cpu_rq (this_cpu)->rd->sched_mc_preferred_wakeup_cpu; + +if (!cpu_isset (wakeup_cpu, p->cpus_allowed)) +return -1 ; + +return wakeup_cpu; +} +static int wake_idle (int cpu,struct task_struct *p) { +struct rq *task_rq =task_rq (p);struct sched_domain *sd;int i; -unsigned int chosen_wakeup_cpu; -int this_cpu; -struct rq *task_rq =task_rq (p); - -/* -* At POWERSAVINGS_BALANCE_WAKEUP level, if both this_cpu and prev_cpu -* are idle and this is not a kernel thread and this task's affinity -* allows it to be moved to preferred cpu, then just move! -*/ - this_cpu =smp_processor_id (); - chosen_wakeup_cpu = -cpu_rq (this_cpu)->rd->sched_mc_preferred_wakeup_cpu; - -if (sched_mc_power_savings >=POWERSAVINGS_BALANCE_WAKEUP && -idle_cpu (cpu) &&idle_cpu (this_cpu) && - p->mm && !(p->flags &PF_KTHREAD ) && -cpu_isset (chosen_wakeup_cpu, p->cpus_allowed)) -return chosen_wakeup_cpu; + i =wake_idle_power_save (cpu, p); +if (i >=0 ) +return i;/* * If it is idle, then it is the best cpu to run this task.
@@ -1093,7 +1113,7 @@ static int wake_idle(int cpu, struct tas* Siblings must be also busy(in most cases) as they didn't already * pickup the extra load from this cpu and hence we need not check * sibling runqueue info. This will avoid the checks and cache miss -* penalities associated with that. +* penalties associated with that. */ if (idle_cpu (cpu) ||cpu_rq (cpu)->cfs.nr_running >1 )return cpu;
RFC PATCH 14/14 sched: cleanup wake_idle
In reply to Peter ZijlstraA more readable version, with a few differences:
- don't check against the root domain, but instead check SD_LOAD_BALANCE
- don't re-iterate the cpus already iterated on the previous SD
- use rcu_read_lock() around the sd iteration
--- kernel/sched_fair.c | 45 +++++++++++++++++++++++++-------------------- 1 file changed, 25 insertions(+), 20 deletions(-)
kernel/sched_fair.c +25 -20
@@ -1053,15 +1053,10 @@ static void yield_task_fair(struct rq *r* not idle and an idle cpu is available. The span of cpus to * search starts with cpus closest then further out as needed, * so we always favor a closer, idle cpu. -* Domains may include CPUs that are not usable for migration, -* hence we need to mask them out (rq->rd->online) * * Returns the CPU we should wake onto. */ #if defined(ARCH_HAS_SCHED_WAKE_IDLE ) - -#define cpu_rd_active (cpu, rq) cpumask_test_cpu(cpu, rq->rd->online) -/* * At POWERSAVINGS_BALANCE_WAKEUP level, if both this_cpu and prev_cpu * are idle and this is not a kernel thread and this task's affinity
@@ -1099,7 +1094,7 @@ static int wake_idle_power_save(int cpu,static int wake_idle (int cpu,struct task_struct *p) {struct rq *task_rq =task_rq (p); -struct sched_domain *sd; +struct sched_domain *sd, *child =NULL ;int i; i =wake_idle_power_save (cpu, p);
@@ -1118,24 +1113,34 @@ static int wake_idle(int cpu, struct tasif (idle_cpu (cpu) ||cpu_rq (cpu)->cfs.nr_running >1 )return cpu; +rcu_read_lock ();for_each_domain (cpu, sd) { -if ((sd->flags &SD_WAKE_IDLE ) - || ((sd->flags &SD_WAKE_IDLE_FAR ) - && !task_hot (p, task_rq->clock, sd))) { -for_each_cpu_and (i,sched_domain_span (sd), - &p->cpus_allowed) { -if (cpu_rd_active (i, task_rq) &&idle_cpu (i)) { -if (i !=task_cpu (p)) { -schedstat_inc (p, - se.nr_wakeups_idle); - } -return i; - } - } - }else { +if (!(sd->flags &SD_LOAD_BALANCE ))break ; + +if (!(sd->flags &SD_WAKE_IDLE ) && + (task_hot (p, task_rq->clock, sd) || !(sd->flags &SD_WAKE_IDLE_FAR ))) +break ; + +for_each_cpu_and (i,sched_domain_span (sd), &p->cpus_allowed) { +if (child &&cpumask_test_cpu (i,sched_domain_span (child))) +continue ; + +if (!idle_cpu (i)) +continue ; + +if (task_cpu (p) != i) +schedstat_inc (p, se.nr_wakeups_idle); + + cpu = i; + goto unlock; } + + child = sd; } +unlock: +rcu_read_unlock (); + return cpu; }#else /* !ARCH_HAS_SCHED_WAKE_IDLE*/