boot linux data aboot for S3C2440A
now boot linux is OK.
mkimage -e /*Entry Point*/ must is /*Load Address + 0x40*/
[u-boot at S3C2440A]# bootm 0x30008000
## Booting kernel from Legacy Image at 30008000 ...
Image Name: linux-2.6.30-5 Created: 2009-09-05 8:17:13 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1513852 Bytes = 1.4 MB
Load Address: 30008000
Entry Point: 30008040
Verifying Checksum ... OK
XIP Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux............................................................................................... done, booting the kernel. Linux version 2.6.30.5 (root at archlinux) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #1 Sat Sep 5 01:02:52 CST 2009
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: KIBNT_core_board
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C24XX Clocks, (c) 2004 Simtec Electronics
.......
for dear Wolfgang Denk,thank you for you help
Quoted 5 lines
Quoted 2 lines
what is wrong with me.
You mean, that you don't have a real name? Hm.. I'm afraid I cannot answer that.
my English is just so so,and I am a newman for using mail list.sorry.
Quoted 17 lines
Quoted 9 lines
[u-boot at S3C2440A]# nand read
0x300080000x000400000x00200000NAND read: device 0 offset0x40000, size0x2000002097152 bytes read: OK
[u-boot at S3C2440A]# bootm0x30008000
## Booting kernel from Legacy Image at 30008000 ...Image Name: linux-2.6.30-5 Created: 2009-09-04 14:22:40 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1958132 Bytes = 1.9 MBQuoted 7 lines
Load Address: 30008000
Entry Point: 30008000
Verifying Checksum ... OK
XIP Kernel Image ... OK
OK
Starting kernel ...
data abort
Quoted 3 lines
Meybe you should provide a bit more information, like which versions of U-Boot and Linux you are using, how exactly you created the Linux kernel image, etc.
I am using U-BOOT 1.3.4 and my linuxOS is archlinux
Quoted 3 lines
And you should probably start and get a simple configuration (i. e. without funny stuff like XIP) running first, before you try such advanced things.
I do not configurate XIP,and I do not know how does it appear at "XIP Kernel Image ... OK"
for dear abdoulaye Walsimou Gaye thank you for your help
Quoted 7 lines
Quoted 6 lines
what is wrong with me.
[u-boot at S3C2440A]# nand read
0x300080000x000400000x00200000NAND read: device 0 offset0x40000, size0x200000
2097152 bytes read: OK
Quoted 5 lines
Hello fluke56512,
IIRC board with S3C2440A does not exist in the official versions of u-boot. Few attempts have been made[1], but without going futher. Or may be you are working on it? I planed to work on it
with the cheap mini2440 board, but I am too busy for now.
mini2440 is not cheap for a student in my country. 2009-09-05
fluke56512
Quoted 4 lines · fluke56512 wrote:
mini2440 is not cheap for a student in my country. 2009-09-05
I just want to say sorry for this mistake
Cheers,