Skip to contentSkip to conversation

Kconfig support for s3c matrix keypad

PATCH In review 양진성 2 participants 2 messages Sep 5, 2009

Subsystems (2)
lore
Share & tools
lore

양진성

author
#0 lore raw

PATCH 1/3 Kconfig support for s3c matrix keypad

This patch supports to select configuration for s3c matrix keypad.

---
 drivers/input/keyboard/Kconfig |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
drivers/input/keyboard/Kconfig +6 -0
index a6b989a..4a04553 100644
@@ -361,4 +361,10 @@ config KEYBOARD_XTKBD
 	  To compile this driver as a module, choose M here: the
 	  module will be called xtkbd.
 
+config KEYBOARD_S3C
+	tristate "Samsung S3C keypad support"
+	depends on PLAT_S3C
+	help
+	  Enable support for Samsung S3C keypad interface.
+
 endif
Signature · 1 line
1.6.2.5
#1 lore raw
Quoted 4 lines · 양진성

This patch supports to select configuration for s3c matrix keypad.

A relatively technical point but you should always try to order your patch series so that the kernel always builds, even with the patch series partly applied. This means that if you've split out the build system changes that should be the last patch in the series.

Doing this is useful when people use tools such as 'git bisect' which walk through history and also means that it's possible to do things like partially apply the series (for example, if you get a situation where the earlier patches are all OK but there's some issues that need to be resolved in the later ones).

It'd probably also help to combine more of your changes together - in general it's better if patches achieve some goal in a self-contained fashion. This normally makes things easier to review. Things like doing the build system separately are normally there in order to split a very large driver into managable chunks.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html