MSI Digivox Micro HD support?
Hi,
Am Tuesday 15 September 2009 20:31:29 schrieben Sie:
Quoted 12 lines · Roman v. Gemmeren
Quoted 10 lines
hi list,
i just bought the above mentioned DVBT-Stick after my terratec prodigy died (from overheating i guess).
I remembered sth. about digivox being supported, but i found only drivers for the "Digivox Mini II 3.0" which don't seem to recognize that stick at all.Anyone got that card working? If it is just the usb-id which is missing, how /where would i add that to the source?
Quoted 6 lines
Just do lsusb -vvd USB:ID and post here. From that we usually can say which chips are used and correct driver needed for device. Also you can look driver .inf file, driver filenames, look strings from driver, look sniff or open the box to identify chips.
Antti
This is the output for the Stick:
root@Seth:~strowi/tmp> lsusb -vvd 1ba6:0001
Bus 001 Device 005: ID 1ba6:0001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x1ba6 idProduct 0x0001 bcdDevice 1.00 iManufacturer 1 Abilis Systems iProduct 2 ATon2 DVB Receiver iSerial 3 0001 bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 300mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
greetings,
Roman
Quoted 14 lines · Roman v. Gemmeren
Quoted 14 lines
Quoted 8 lines
i just bought the above mentioned DVBT-Stick after my terratec prodigy died (from overheating i guess).
I remembered sth. about digivox being supported, but i found only drivers for the "Digivox Mini II 3.0" which don't seem to recognize that stick at all.Anyone got that card working? If it is just the usb-id which is missing, how /where would i add that to the source?
Just do lsusb -vvd USB:ID and post here. From that we usually can say which chips are used and correct driver needed for device. Also you can look driver .inf file, driver filenames, look strings from driver, look sniff or open the box to identify chips.
Quoted 4 lines
Quoted 1 line
Antti
This is the output for the Stick:
root@Seth:~strowi/tmp> lsusb -vvd 1ba6:0001
Bad new. This looks like totally new chip. In my understanding no-one is working for that and this is first time I hear even it.
http://www.abilis.com/
If they are willing to give specs and sample code for the GPL then someone could be willing to write driver. Or reverse-engineering...
Antti
Signature · 1 line
http://palosaari.fi/
Am Tuesday 15 September 2009 21:52:33 schrieb Antti Palosaari:
Quoted 8 lines
Bad new. This looks like totally new chip. In my understanding no-one is working for that and this is first time I hear even it.
http://www.abilis.com/If they are willing to give specs and sample code for the GPL then someone could be willing to write driver. Or reverse-engineering...
Antti
*argh* that fits todays story... My Terratec Prodigy stick died, i went to the local dealer and got an hvr-900, which turned out to be really a hvr-900h, which is not supported. The message on hauppauge's website is old, and they do not have any plans on supporting that stick. Then i took my bike again back to the dealer (it started raining...), after 10min. arguing i finally could return the stick, and selected the digi vox micro, and didn't get my money back, just a coupon...
Next time i'll definitely order via internet again...
greetings,
Roman
Signature · 3 lines
BOFH Excuse #76: Unoptimized hard drive