net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
PATCH 1/5 net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
This will be needed for MPC8360E-MDS boards with rev. 2.1 CPUs.
Signed-off-by Anton Vorontsov <[email protected]>
--- drivers/qe/uec.h | 1 + drivers/qe/uec_phy.c | 15 +++++++++++++-- 2 files changed, 14 insertions(+), 2 deletions(-)
drivers/qe/uec.h +1 -0
@@ -670,6 +670,7 @@ typedef enum enet_interface {ENET_1000_RGMII ,ENET_1000_RGMII_ID ,ENET_1000_RGMII_RXID , +ENET_1000_RGMII_TXID ,ENET_1000_TBI ,ENET_1000_RTBI ,ENET_1000_SGMII
drivers/qe/uec_phy.c +13 -2
@@ -429,12 +429,23 @@ static int marvell_init(struct uec_mii_info *mii_info) {struct eth_device *edev = mii_info->dev;uec_private_t *uec = edev->priv; +enum enet_interface iface = uec->uec_info->enet_interface; -if (uec->uec_info->enet_interface ==ENET_1000_RGMII_ID ) { +if (iface ==ENET_1000_RGMII_ID || + iface ==ENET_1000_RGMII_RXID || + iface ==ENET_1000_RGMII_TXID ) {int temp; temp =phy_read (mii_info,MII_M1111_PHY_EXT_CR ); - temp |= (MII_M1111_RX_DELAY |MII_M1111_TX_DELAY ); +if (iface ==ENET_1000_RGMII_ID ) { + temp |=MII_M1111_RX_DELAY |MII_M1111_TX_DELAY ; + }else if (iface ==ENET_1000_RGMII_RXID ) { + temp &= ~MII_M1111_TX_DELAY ; + temp |=MII_M1111_RX_DELAY ; + }else if (iface ==ENET_1000_RGMII_TXID ) { + temp &= ~MII_M1111_RX_DELAY ; + temp |=MII_M1111_TX_DELAY ; + }phy_write (mii_info,MII_M1111_PHY_EXT_CR , temp); temp =phy_read (mii_info,MII_M1111_PHY_EXT_SR );
Signature · 1 line
1.6.3.3