PCI: Disable AER with pci=nomsi
PATCH 1/1 PCI: Disable AER with pci=nomsi
PCI: Disable AER with pci=nomsi
When booting with pci=nomsi aer causes lost interrupts and lockdep inversions.
So check if MSIs are not disabled before initializing the aer driver.
Signed-off-by Andi Kleen <[email protected]>
--- drivers/pci/pcie/aer/aerdrv.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/pci/pcie/aer/aerdrv.c +2 -0
@@ -316,6 +316,8 @@ static int __init aer_service_init(void) {if (pcie_aer_disable)return -ENXIO ; +if (!pci_msi_enabled ()) +return -ENXIO ;return pcie_port_service_register (&aerdriver); }
Jesse Barnes
AppliedQuoted 9 lines · On Wed, 16 Sep 2009 22:40:22 +0200 Andi Kleen <[email protected]> wrote:
PCI: Disable AER with pci=nomsi
When booting with pci=nomsi aer causes lost interrupts and lockdep inversions.
So check if MSIs are not disabled before initializing the aer driver.
Signed-off-by Andi Kleen <[email protected]>
Applied to my linux-next tree for the next pull. Thanks.
Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center