Skip to contentSkip to conversation

mfd: Convert WM8350 to use request_threaded_irq()

PATCH Applied Mark Brown 2 participants 3 messages Sep 16, 2009 – Sep 17, 2009

Subsystems (2)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/1 mfd: Convert WM8350 to use request_threaded_irq()

Instead of hand rolling our own variant.

---
 drivers/mfd/wm8350-core.c       |   24 ++++++------------------
 include/linux/mfd/wm8350/core.h |    1 -
 2 files changed, 6 insertions(+), 19 deletions(-)
drivers/mfd/wm8350-core.c +6 -18
index 9d662a5..ba27c9d 100644
@@ -353,15 +353,15 @@ static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq)
 }
 
 /*
- * wm8350_irq_worker actually handles the interrupts.  Since all
+ * This is a threaded IRQ handler so can access I2C/SPI.  Since all
  * interrupts are clear on read the IRQ line will be reasserted and
  * the physical IRQ will be handled again if another interrupt is
  * asserted while we run - in the normal course of events this is a
  * rare occurrence so we save I2C/SPI reads.
  */
-static void wm8350_irq_worker(struct work_struct *work)
+static irqreturn_t wm8350_irq(int irq, void *data)
 {
-	struct wm8350 *wm8350 = container_of(work, struct wm8350, irq_work);
+	struct wm8350 *wm8350 = data;
 	u16 level_one, status1, status2, comp;
 
 	/* TODO: Use block reads to improve performance? */
@@ -552,16 +552,6 @@ static void wm8350_irq_worker(struct work_struct *work)
 		}
 	}
 
-	enable_irq(wm8350->chip_irq);
-}
-
-static irqreturn_t wm8350_irq(int irq, void *data)
-{
-	struct wm8350 *wm8350 = data;
-
-	disable_irq_nosync(irq);
-	schedule_work(&wm8350->irq_work);
-
 	return IRQ_HANDLED;
 }
 
@@ -1428,9 +1418,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 
 	mutex_init(&wm8350->auxadc_mutex);
 	mutex_init(&wm8350->irq_mutex);
-	INIT_WORK(&wm8350->irq_work, wm8350_irq_worker);
 	if (irq) {
-		int flags = 0;
+		int flags = IRQF_ONESHOT;
 
 		if (pdata && pdata->irq_high) {
 			flags |= IRQF_TRIGGER_HIGH;
@@ -1444,8 +1433,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 					  WM8350_IRQ_POL);
 		}
 
-		ret = request_irq(irq, wm8350_irq, flags,
-				  "wm8350", wm8350);
+		ret = request_threaded_irq(irq, NULL, wm8350_irq, flags,
+					   "wm8350", wm8350);
 		if (ret != 0) {
 			dev_err(wm8350->dev, "Failed to request IRQ: %d\n",
 				ret);
@@ -1505,7 +1494,6 @@ void wm8350_device_exit(struct wm8350 *wm8350)
 	platform_device_unregister(wm8350->codec.pdev);
 
 	free_irq(wm8350->chip_irq, wm8350);
-	flush_work(&wm8350->irq_work);
 	kfree(wm8350->reg_cache);
 }
 EXPORT_SYMBOL_GPL(wm8350_device_exit);
include/linux/mfd/wm8350/core.h +0 -1
index 969b0b5..1d595de 100644
@@ -626,7 +626,6 @@ struct wm8350 {
 	struct mutex auxadc_mutex;
 
 	/* Interrupt handling */
-	struct work_struct irq_work;
 	struct mutex irq_mutex; /* IRQ table mutex */
 	struct wm8350_irq irq[WM8350_NUM_IRQ];
 	int chip_irq;
Signature · 1 line
1.6.3.3
Applied
#1 lore raw

Hi Mark,

Quoted 1 line · Mark Brown

Instead of hand rolling our own variant.

Very nice. I expect many other mfd drivers will eventually go the same way. I'll look at the ones I have HW for.

Applied, thanks.

Cheers,
Samuel.

Quoted 91 lines
---
 drivers/mfd/wm8350-core.c       |   24 ++++++------------------
 include/linux/mfd/wm8350/core.h |    1 -
 2 files changed, 6 insertions(+), 19 deletions(-)
drivers/mfd/wm8350-core.c +6 -18
index 9d662a5..ba27c9d 100644
@@ -353,15 +353,15 @@ static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq)
 }
 
 /*
- * wm8350_irq_worker actually handles the interrupts.  Since all
+ * This is a threaded IRQ handler so can access I2C/SPI.  Since all
  * interrupts are clear on read the IRQ line will be reasserted and
  * the physical IRQ will be handled again if another interrupt is
  * asserted while we run - in the normal course of events this is a
  * rare occurrence so we save I2C/SPI reads.
  */
-static void wm8350_irq_worker(struct work_struct *work)
+static irqreturn_t wm8350_irq(int irq, void *data)
 {
-	struct wm8350 *wm8350 = container_of(work, struct wm8350, irq_work);
+	struct wm8350 *wm8350 = data;
 	u16 level_one, status1, status2, comp;
 
 	/* TODO: Use block reads to improve performance? */
@@ -552,16 +552,6 @@ static void wm8350_irq_worker(struct work_struct *work)
 		}
 	}
 
-	enable_irq(wm8350->chip_irq);
-}
-
-static irqreturn_t wm8350_irq(int irq, void *data)
-{
-	struct wm8350 *wm8350 = data;
-
-	disable_irq_nosync(irq);
-	schedule_work(&wm8350->irq_work);
-
 	return IRQ_HANDLED;
 }
 
@@ -1428,9 +1418,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 
 	mutex_init(&wm8350->auxadc_mutex);
 	mutex_init(&wm8350->irq_mutex);
-	INIT_WORK(&wm8350->irq_work, wm8350_irq_worker);
 	if (irq) {
-		int flags = 0;
+		int flags = IRQF_ONESHOT;
 
 		if (pdata && pdata->irq_high) {
 			flags |= IRQF_TRIGGER_HIGH;
@@ -1444,8 +1433,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 					  WM8350_IRQ_POL);
 		}
 
-		ret = request_irq(irq, wm8350_irq, flags,
-				  "wm8350", wm8350);
+		ret = request_threaded_irq(irq, NULL, wm8350_irq, flags,
+					   "wm8350", wm8350);
 		if (ret != 0) {
 			dev_err(wm8350->dev, "Failed to request IRQ: %d\n",
 				ret);
@@ -1505,7 +1494,6 @@ void wm8350_device_exit(struct wm8350 *wm8350)
 	platform_device_unregister(wm8350->codec.pdev);
 
 	free_irq(wm8350->chip_irq, wm8350);
-	flush_work(&wm8350->irq_work);
 	kfree(wm8350->reg_cache);
 }
 EXPORT_SYMBOL_GPL(wm8350_device_exit);
include/linux/mfd/wm8350/core.h +0 -1
index 969b0b5..1d595de 100644
@@ -626,7 +626,6 @@ struct wm8350 {
 	struct mutex auxadc_mutex;
 
 	/* Interrupt handling */
-	struct work_struct irq_work;
 	struct mutex irq_mutex; /* IRQ table mutex */
 	struct wm8350_irq irq[WM8350_NUM_IRQ];
 	int chip_irq;
Signature · 1 line
1.6.3.3
Signature · 2 lines
Intel Open Source Technology Centre
http://oss.intel.com/
author
#2 lore raw
Quoted 6 lines · Samuel Ortiz
Quoted 1 line · Mark Brown

Instead of hand rolling our own variant.

Very nice. I expect many other mfd drivers will eventually go the same way. I'll look at the ones I have HW for.

I've got a patch sitting waiting to convert wm831x completely to genirq, including changing to use threaded IRQ handlers. It'll probably be after the merge window before I finish up testing and post it.