test for "spurious" IRQ ignores possible IRQ_WAKE_THREAD value
never ashamed to embarrass myself in public, i just noticed the
following. from kernel/irq/spurious.c:
...
static void
__report_bad_irq(unsigned int irq, struct irq_desc *desc,
irqreturn_t action_ret)
{
struct irqaction *action;
if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) {
printk(KERN_ERR "irq event %d: bogus return value %x\n",
irq, action_ret); but from include/linux/irqreturn.h, we see *three* possible return
values:
enum irqreturn {
IRQ_NONE,
IRQ_HANDLED,
IRQ_WAKE_THREAD,
};
typedef enum irqreturn irqreturn_t;
#define IRQ_RETVAL(x) ((x) != IRQ_NONE)
is there an inconsistency here?
rday
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Annoying Kernel Pedantry.
Web page: http://crashcourse.ca Twitter: http://twitter.com/rpjday
========================================================================
Quoted 23 lines · Robert P. J. Day
never ashamed to embarrass myself in public, i just noticed the
following. fromkernel/irq/spurious.c:...
static void
__report_bad_irq(unsigned int irq, structirq_desc*desc,
irqreturn_taction_ret){ struct irqaction *action; if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) { printk(KERN_ERR "irq event %d: bogus return value %x\n", irq, action_ret);but from
include/linux/irqreturn.h, we see *three* possible return
values:enum irqreturn {
IRQ_NONE,
IRQ_HANDLED,
IRQ_WAKE_THREAD,
};
Quoted 4 lines
typedef enum irqreturn
irqreturn_t;
#defineIRQ_RETVAL(x)((x) !=IRQ_NONE)is there an inconsistency here?
i should have pointed out that there is (apparently) only one place
in the entire tree that uses that third return value:
$ grep -rw IRQ_WAKE_THREAD * drivers/net/wireless/b43/main.c: return IRQ_WAKE_THREAD; <-- there include/linux/irqreturn.h: * @IRQ_WAKE_THREAD handler requests to wake the handler thread include/linux/irqreturn.h: IRQ_WAKE_THREAD, Binary file include/linux/.irqreturn.h.swp matches include/linux/interrupt.h: * IRQTF_WARNED - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed kernel/irq/handle.c: printk(KERN_WARNING "IRQ %d device %s returned IRQ_WAKE_THREAD " kernel/irq/handle.c: case IRQ_WAKE_THREAD: kernel/irq/manage.c: return IRQ_WAKE_THREAD; kernel/irq/manage.c: * IRQ_WAKE_THREAD which will wake up the handler thread and run $
for what that's worth.
rday
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Annoying Kernel Pedantry.
Web page: http://crashcourse.ca Twitter: http://twitter.com/rpjday
========================================================================
[Robert P. J. Day - Mon, Sep 14, 2009 at 04:34:48PM -0400]
| On Mon, 14 Sep 2009, Robert P. J. Day wrote:
|
| > never ashamed to embarrass myself in public, i just noticed the
| > following. from kernel/irq/spurious.c:
| >
| > ...
| > static void
| > __report_bad_irq(unsigned int irq, struct irq_desc *desc,
| > irqreturn_t action_ret)
| > {
| > struct irqaction *action;
| >
| > if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) {
| > printk(KERN_ERR "irq event %d: bogus return value %x\n",
| > irq, action_ret);
| >
| > but from include/linux/irqreturn.h, we see *three* possible return
| > values:
| >
| > enum irqreturn {
| > IRQ_NONE,
| > IRQ_HANDLED,
| > IRQ_WAKE_THREAD,
| > };
| >
| > typedef enum irqreturn irqreturn_t;
| > #define IRQ_RETVAL(x) ((x) != IRQ_NONE)
| >
| > is there an inconsistency here?
| ...
Hi Robert,
It could that IRQ_WAKE_THREAD is just missed here. I suppose it was brough there as thread irq merged. But I think only Thomas know for sure, I definitely miss something :) CC'ed
-- Cyrill
Quoted 31 lines · Cyrill Gorcunov
[Robert P. J. Day - Mon, Sep 14, 2009 at 04:34:48PM -0400]
| On Mon, 14 Sep 2009, Robert P. J. Day wrote: | | > never ashamed to embarrass myself in public, i just noticed the | > following. from kernel/irq/spurious.c: | > | > ... | > static void | > __report_bad_irq(unsigned int irq, struct irq_desc *desc, | > irqreturn_t action_ret) | > { | > struct irqaction *action; | > | > if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) { | > printk(KERN_ERR "irq event %d: bogus return value %x\n", | > irq, action_ret); | > | > but from include/linux/irqreturn.h, we see *three* possible return | > values: | > | > enum irqreturn { | > IRQ_NONE, | > IRQ_HANDLED, | > IRQ_WAKE_THREAD, | > }; | > | > typedef enum irqreturn irqreturn_t; | > #define IRQ_RETVAL(x) ((x) != IRQ_NONE) | > | > is there an inconsistency here? |
Quoted 7 lines
...
Hi Robert,
It could that
IRQ_WAKE_THREADis just missed here. I suppose it was brough there as thread irq merged. But I think only Thomas know for sure, I definitely miss something :) CC'ed
from kernel/irq/handle.c:
trace_irq_handler_entry(irq, action);
ret = action->handler(irq, action->dev_id);
trace_irq_handler_exit(irq, action, ret);
switch (ret) {
case IRQ_WAKE_THREAD:
/*
* Set result to handled so the spurious check
* does not trigger.
*/
ret = IRQ_HANDLED;So nothing to worry about :)
Thanks,
tglx
Quoted 31 lines · Cyrill Gorcunov
[Robert P. J. Day - Mon, Sep 14, 2009 at 04:34:48PM -0400]
| On Mon, 14 Sep 2009, Robert P. J. Day wrote: | | > never ashamed to embarrass myself in public, i just noticed the | > following. from kernel/irq/spurious.c: | > | > ... | > static void | > __report_bad_irq(unsigned int irq, struct irq_desc *desc, | > irqreturn_t action_ret) | > { | > struct irqaction *action; | > | > if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) { | > printk(KERN_ERR "irq event %d: bogus return value %x\n", | > irq, action_ret); | > | > but from include/linux/irqreturn.h, we see *three* possible return | > values: | > | > enum irqreturn { | > IRQ_NONE, | > IRQ_HANDLED, | > IRQ_WAKE_THREAD, | > }; | > | > typedef enum irqreturn irqreturn_t; | > #define IRQ_RETVAL(x) ((x) != IRQ_NONE) | > | > is there an inconsistency here? |
Quoted 7 lines
...
Hi Robert,
It could that
IRQ_WAKE_THREADis just missed here. I suppose it was brough there as thread irq merged. But I think only Thomas know for sure, I definitely miss something :) CC'ed
actually, after a bit more reading, i found this inkernel/irq/handle.c:
...
switch (ret) {
case IRQ_WAKE_THREAD:
/*
* Set result to handled so the spurious check
* does not trigger.
*/
ret = IRQ_HANDLED;
...so it looks like that value of IRQ_WAKE_THREAD is simply "mapped" to IRQ_HANDLED, and perhaps that's done before __report_bad_irq is ever called so that that latter routine never sees a value of IRQ_WAKE_THREAD. but that's just a guess.
rday
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Annoying Kernel Pedantry.
Web page: http://crashcourse.ca Twitter: http://twitter.com/rpjday
========================================================================
[Robert P. J. Day - Thu, Sep 17, 2009 at 04:08:32PM -0400]
...
| > Hi Robert,
| >
| > It could that IRQ_WAKE_THREAD is just missed here. I suppose it was
| > brough there as thread irq merged. But I think only Thomas know for
| > sure, I definitely miss something :) CC'ed
|
| actually, after a bit more reading, i found this in
| kernel/irq/handle.c:
| ...
| switch (ret) {
| case IRQ_WAKE_THREAD:
| /*
| * Set result to handled so the spurious check
| * does not trigger.
| */
| ret = IRQ_HANDLED;
| ...
|
| so it looks like that value of IRQ_WAKE_THREAD is simply "mapped" to
| IRQ_HANDLED, and perhaps that's done before __report_bad_irq is ever
| called so that that latter routine never sees a value of
| IRQ_WAKE_THREAD. but that's just a guess.
|
| rday
| --yeah, Thomas just pointed it too :) The note_interrupt is called after handle_IRQ_event (except a few drivers which don;t use threaded irq) so it doesnt reach bad irq state with IRQ_WAKE_THREAD, for now at least.
-- Cyrill