Details of fw_env.config file
Hi All,.
I wanted to know the meaning of Device Offset in the config file (fw_env.config).
I used it as
MTD device name Device offset Env. size Flash sector size
Number of sectors
/dev/mtd0 0x0000 0x1000 0x10000
The partition mtd0 contains uboot as well as Environment variables. when i used fw_setenv command to set the boot delay to 6, it actually erased my u-boot itself.
Should i Keep Environment variables in separate mtd partition say mtd1.?
Is it enough to change the device offset to point the environment variables within mtd1 itself?
Please help!!!!
Thanks
Rahanesh
Dear Rahanesh,
Quoted 3 lines · In message <[email protected]> you wrote:
I wanted to know the meaning of Device Offset in the config file (fw_env.config).
Please see "tools/env/README".
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "The whole problem with the world is that fools and fanatics are always so certain of themselves, but wiser people so full of doubts." - Bertrand Russell