Makefile ref to non-existent CONFIG_ATHEROS_AR71XX
searching for Makefile references to Kconfig variables that don't
exist, and i find:
===== ATHEROS_AR71XX ===== ./drivers/net/wireless/ath/ath9k/Makefile:ath9k-$(CONFIG_ATHEROS_AR71XX) += ahb.o
just FYI.
rday
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Annoying Kernel Pedantry.
Web page: http://crashcourse.ca Twitter: http://twitter.com/rpjday
========================================================================
Hi Robert,
Le vendredi 18 septembre 2009 16:01:25, Robert P. J. Day a ?crit :
Quoted 6 lines
searching for
Makefilereferences toKconfigvariables that don't
exist, and i find:=====
ATHEROS_AR71XX===== ./drivers/net/wireless/ath/ath9k/Makefile:ath9k-$(CONFIG_ATHEROS_AR71XX) += ahb.o
We need it in OpenWrt and plan to send Atheros AR71xx SoC support soon, do not consider this for removal. Thanks
Signature · 5 lines
Best regards, Florian Fainelli Email: florian at openwrt.org Web: http://openwrt.org IRC: [florian] on irc.freenode.net -------------------------------
Quoted 6 lines · Florian Fainelli
Hi Robert,
Le vendredi 18 septembre 2009 16:01:25, Robert P. J. Day a ?crit :
Quoted 3 lines
searching for
Makefilereferences toKconfigvariables that don't
exist, and i find:
Quoted 6 lines
Quoted 3 lines
=====
ATHEROS_AR71XX===== ./drivers/net/wireless/ath/ath9k/Makefile:ath9k-$(CONFIG_ATHEROS_AR71XX) += ahb.oWe need it in OpenWrt and plan to send Atheros AR71xx SoC support soon, do not consider this for removal. Thanks
Sure, fine...estimate when it will arrive?
John
Signature · 2 lines
John W. Linville Someday the world will need a hero, and you linville at tuxdriver.com might be all we have. Be ready.
Quoted 11 lines · On 2009.09.28. 20:29:45 John W. Linville <[email protected]> wrote:
Quoted 10 lines · Florian Fainelli
Hi Robert,
Le vendredi 18 septembre 2009 16:01:25, Robert P. J. Day a ?crit :
Quoted 6 lines
searching for
Makefilereferences toKconfigvariables that don't
exist, and i find:=====
ATHEROS_AR71XX===== ./drivers/net/wireless/ath/ath9k/Makefile:ath9k-$(CONFIG_ATHEROS_AR71XX) += ahb.o
Quoted 6 lines
Quoted 2 lines
We need it in OpenWrt and plan to send Atheros AR71xx SoC support soon, do not consider this for removal. Thanks
Sure, fine...estimate when it will arrive?
John
When we got access to some more info on the AR7240 so we can finish the support for it.
Imre
Quoted 17 lines · Imre Kaloz
Quoted 15 lines · On 2009.09.28. 20:29:45 John W. Linville <[email protected]> wrote:
Quoted 13 lines · Florian Fainelli
Hi Robert,
Le vendredi 18 septembre 2009 16:01:25, Robert P. J. Day a ?crit :
Quoted 7 lines
searching for
Makefilereferences toKconfigvariables that don't
exist, and i find:=====
ATHEROS_AR71XX===== ./drivers/net/wireless/ath/ath9k/Makefile:ath9k-$(CONFIG_ATHEROS_AR71XX) +=
ahb.oWe need it in OpenWrt and plan to send Atheros AR71xx SoC support soon, do not consider this for removal. Thanks
Quoted 6 lines
Quoted 3 lines
Sure, fine...estimate when it will arrive?
John
When we got access to some more info on the AR7240 so we can finish the support for it.
just FYI, i wasn't pushing to have it taken out, just pointing out
its current lack of use. what someone decides to do about it is entirely in their hands.
rday
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Annoying Kernel Pedantry.
Web page: http://crashcourse.ca Twitter: http://twitter.com/rpjday
========================================================================
[ath9k-devel] where to buy ar6k SDIO device
List,
Does anyone know where I can buy a working AR6000 sdio device? I know its driver is maintained by OpenMoko.
Appreciate for any help.
---henry
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
[ath9k-devel] where to buy ar6k SDIO device
Quoted 4 lines · hong zhang
List,
Does anyone know where I can buy a working AR6000 sdio device? I know its driver is maintained by OpenMoko.
You can't really purchase one through regular retail shops. As with other mobile wireless devices these will be built in on embedded devices. Of course people can dismantle their embedded devices and sell parts on ebay but I think thats very rare.
Luis
[ath9k-devel] ad-hoc
Luis,
I have a AR5008 NIC. it But does not work on ad-hoc mode. Does ath9k support ad-hoc?
---henry
[ath9k-devel] ad-hoc
For what I recall from your previous discussion on this list, the answer is NO, it does not support HT rates on adhoc mode. But I have used my ath9k device on non-HT rates.
Quoted 5 lines · hong zhang
Luis,
I have a AR5008 NIC. it But does not work on ad-hoc mode. Does ath9k support ad-hoc?
Quoted 9 lines
---henry
_______________________________________________
ath9k-devel mailing list
ath9k-devel at lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20091007/b808afd8/attachment.htm
[ath9k-devel] ad-hoc
that's true, ath9k/adhoc works well under non-HT mode only.
Quoted 50 lines · Rakesh Kumar
From: Rakesh Kumar <[email protected]>
Subject: Re: [ath9k-devel] ad-hoc
To: "hong zhang" <[email protected]>
Cc: ath9k-devel at lists.ath9k.org
Date: Wednesday, October 7, 2009, 5:29 PM
For what I recall from your previous
discussion on this list, the answer is NO, it does not support HT rates on adhoc mode. But I have used my ath9k device on non-HT rates.On Tue, Oct 6, 2009 at 8:44 PM,
hong zhang <[email protected]>
wrote:Luis,
I have a AR5008 NIC. it But does not work on ad-hoc mode.
Does ath9k support ad-hoc?
---henry
_______________________________________________
ath9k-devel mailing list
ath9k-devel at lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
-----Inline Attachment Follows-----
_______________________________________________
ath9k-devel mailing list
ath9k-devel at lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
[ath9k-devel] ad-hoc
I don't think there are any hardware limitations on using HT rates on ad-hoc mode but I may be wrong, maybe Louis or Johannes can clarify. If not then what is a good way to think about a hack?
--
Rakesh
Quoted 55 lines · xxiao
that's true, ath9k/adhoc works well under non-HT mode only.
Quoted 50 lines · Rakesh Kumar
From: Rakesh Kumar <[email protected]>
Subject: Re: [ath9k-devel] ad-hoc
To: "hong zhang" <[email protected]>
Cc: ath9k-devel at lists.ath9k.org
Date: Wednesday, October 7, 2009, 5:29 PM
For what I recall from your previous
discussion on this list, the answer is NO, it does not support HT rates on adhoc mode. But I have used my ath9k device on non-HT rates.On Tue, Oct 6, 2009 at 8:44 PM,
hong zhang <[email protected]>
wrote:Luis,
I have a AR5008 NIC. it But does not work on ad-hoc mode.
Does ath9k support ad-hoc?
---henry
_______________________________________________
ath9k-devel mailing list
ath9k-devel at lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
-----Inline Attachment Follows-----
_______________________________________________
ath9k-devel mailing list
ath9k-devel at lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20091008/98cb201e/attachment.htm
[ath9k-devel] ad-hoc
Quoted 3 lines · Rakesh Kumar
I don't think there are any hardware limitations on using HT rates on ad-hoc mode but I may be wrong, maybe Louis or Johannes can clarify. If not then what is a good way to think about a hack?
Someone interested in adhoc with 11n support just needs to read the 11n draft (now approved and should be released soon to the public if you don't have it) and address it on mac80211 first then test it with the driver and ensure aggregation is enabled for adhoc mode on the driver.
For mesh its the same but it seems the 11s draft does not cover aggregation but only using MCS rates.
Luis
[ath9k-devel] where to buy ar6k SDIO device
In reply to Luis R. RodriguezQuoted 11 lines · Luis R. Rodriguez
Quoted 3 lines · hong zhang
List,
Does anyone know where I can buy a working AR6000 sdio device? I know its driver is maintained by OpenMoko.
You can't really purchase one through regular retail shops. As with other mobile wireless devices these will be built in on embedded devices. Of course people can dismantle their embedded devices and sell parts on ebay but I think thats very rare.
Luis
I've recently been researching this [1], and there seems to be two possible SD sized SDIO options for AR6001 based devices (note that AR6002 devices do have a blob that needs to be loaded from linux):
1. SX-SDWAG (preferable as it has built in antenna)
http://www.silexamerica.com/products/wireless_modules/sx-sdwag.html
(Currently trying to source from a few places; one place had it listed but is currently out of stock; I'll see what they do with my order.)
2. CAW-SDIOG
http://www.cardaccess-inc.com/products/index.php?a=wlan_burt
[1] LibrePlanet: Hardware/Freest/Nanonote: Libre Wifi
http://groups.fsf.org/wiki/Hardware/Freest/Nanonote#Libre_Wifi
Happy Hacking,
Signature · 1 line
Daniel JB Clark | http://pobox.com/~dclark
[ath9k-devel] where to buy ar6k SDIO device
Quoted 8 lines · Daniel Clark
I've recently been researching this [1], and there seems to be two possible SD sized SDIO options for AR6001 based devices (note that AR6002 devices do have a blob that needs to be loaded from linux):
1. SX-SDWAG (preferable as it has built in antenna)
http://www.silexamerica.com/products/wireless_modules/sx-sdwag.html
(Currently trying to source from a few places; one place had it listed but is currently out of stock; I'll see what they do with my order.)
I've gotten a few requests off-list regarding the status of this, so I thought I'd post a general update:
(a) The SX-SDWAG is discontinued; Silex Technology US put out a "last buy request" notification to its resellers and distributors about 6 months ago.
(b) Several Chinese-language websites lead me to believe there are several companies in China that may have stock of this item; I have emailed them, but it is currently Chinese "Spring Festival", where pretty much no one works Feb 8 - 22 (and then of course have a big backlog when they get back), so I don't expect to hear back from any of them until early March.
(c) If you would be interested in going in on a group purchase of these, please email dclark at pobox.com with how many you would want and what range of prices you would be interested in that number (I've seen old prices from $70 to $160 on various web sites). I'm guessing if a Chinese supplier has them there will be a MOQ (minimum order quantity) of somewhere between 10 and 100, so group purchase would probably be the only way to get them.
Cheers,
Signature · 1 line
Daniel JB Clark | http://pobox.com/~dclark
[ath9k-devel] where to buy ar6k SDIO device
I bought an AR6001 SDIO card CAW-SDIO? from www.cardaccess-inc.com.
Please note that AR6001 is discontinued. I paid $80 for it.
Quoted 64 lines · Daniel Clark
From: Daniel Clark <[email protected]>
Subject: Re: [ath9k-devel] where to buy ar6k SDIO device
To: ath9k-devel at lists.ath9k.org
Date: Tuesday, February 9, 2010, 2:20 PMQuoted 1 line · Daniel Clark
I've recently been researching this [1], and there
seems to be two
Quoted 1 line
possible SD sized SDIO options for AR6001 based
devices (note that
Quoted 1 line
AR6002 devices do have a blob that needs to be loaded
from linux):
Quoted 4 lines
1. SX-SDWAG (preferable as it has built in antenna)
http://www.silexamerica.com/products/wireless_modules/sx-sdwag.html
(Currently trying to source from a few places; oneplace had it listed
Quoted 1 line
but is currently out of stock; I'll see what they do
with my order.)
I've gotten a few requests off-list regarding the status of this, so I
thought I'd post a general update:(a) The SX-SDWAG is discontinued; Silex Technology US put out a "last
buy request" notification to its resellers and distributors about 6
months ago.(b) Several Chinese-language websites lead me to believe there are
several companies in China that may have stock of this item; I have
emailed them, but it is currently Chinese "Spring Festival", where
pretty much no one works Feb 8 - 22 (and then of course have a big
backlog when they get back), so I don't expect to hear back from any of
them until early March.(c) If you would be interested in going in on a group purchase of these,
please email dclark at pobox.com
with how many you would want and what
range of prices you would be interested in that number (I've seen old
prices from $70 to $160 on various web sites). I'm guessing if a Chinese
supplier has them there will be a MOQ (minimum order quantity) of
somewhere between 10 and 100, so group purchase would probably be the
only way to get them.Cheers,
Signature · 6 lines
Daniel JB Clark | http://pobox.com/~dclark _______________________________________________ ath9k-devel mailing list ath9k-devel at lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
[ath9k-devel] where to buy ar6k SDIO device
Quoted 3 lines · hong zhang
I bought an AR6001 SDIO card CAW-SDIO? from www.cardaccess-inc.com.
Please note that AR6001 is discontinued. I paid $80 for it.
Does it comes as pictured (exposed circuit board), or with a plastic enclosure?
Have you found a good tiny antenna for it?
Thanks,
Signature · 1 line
Daniel JB Clark | Free Software Activist | http://pobox.com/~dclark
[ath9k-devel] where to buy ar6k SDIO device
Quoted 8 lines · Daniel Clark
From: Daniel Clark <[email protected]>
Subject: Re: [ath9k-devel] where to buy ar6k SDIO device
To: "hong zhang" <[email protected]>
Cc: ath9k-devel at lists.ath9k.org
Date: Tuesday, February 9, 2010, 8:59 PM
On Tue, Feb 9, 2010 at 7:22 PM, hong
zhang <[email protected]>
wrote:
Quoted 8 lines
Quoted 1 line
I bought an AR6001 SDIO card CAW-SDIO? from
www.cardaccess-inc.com.
Quoted 2 lines
Please note that AR6001 is discontinued. I paid $80
for it.
Does it comes as pictured (exposed circuit board), or with a plastic enclosure?
It is exposed circuit board as pictured.
Quoted 1 line
Have you found a good tiny antenna for it?
I have a few tiny antennas by myself. Not from it. You can ask if it has one.
Quoted 4 lines
Thanks,
Signature · 1 line
Daniel JB Clark | Free Software Activist | http://pobox.com/~dclark