Skip to contentSkip to conversation

ThinkPad T400 and the mute button ...

DISCUSSION Toralf Förster 2 participants 2 messages Sep 21, 2009

lore
Share & tools
lore
#0 lore raw

It works - but only if the T400 is plugged into the docking station. Then both the mute button at the T400 and the button of the external keyboard works fine. However w/o the docking station pressing the mute button of the T400 gives under KDE the graphical response "mute on" - but that's all, the sound isn't muted.

Is this behaviour known/expected or worth a bug report ?

BTW the BIOS is at the latest level (I hoped to avoid the command line eboot=pci w/ the new BIOS but no chance, that parameter is necessary to avoid an extra wait of about 10 seconds during reboot). OTOH the Intel Management Extension is way older but I'd like to avoid updating it.

Signature · 4 lines
MfG/Sincerely

Toralf Förster
pgp finger print: 7B1A 07F4 EC82 0F90 D4C2 8936 872A E508 7DB6 9DA3
#1 lore raw
Quoted 7 lines · Toralf Förster

It works - but only if the T400 is plugged into the docking station. Then both the mute button at the T400 and the button of the external keyboard works fine. However w/o the docking station pressing the mute button of the T400 gives under KDE the graphical response "mute on" - but that's all, the sound isn't muted.

Is this behaviour known/expected or worth a bug report ?

1. go single user, text mode. No userspace HAL/udev/KDE/GNOME crap allowed for these tests ;-)

2. Test mute/unmute in both keyboards, and check *WHICH* audio outputs get muted. You have at least three: dock line-out, built-in speakers, built-in headphone-out. Remember that some thinkpads (those without a MUTE LED) use a single press of volume up or down as unmute.

3. do the same testing using the alsa HDA mixer.

4. Anything that doesn't light-up the MUTE LED is doing it on the HDA mixer. If you don't have a MUTE led, it gets far more difficult to know what is happening :-(

5. thinkpad-acpi can tell you if the firmware thinks the internal MUTE gate is enabled or not: cat /proc/acpi/ibm/volume. It won't be able to *set* mute state, AFAIK. But it can read it.

Quoted 2 lines

BTW the BIOS is at the latest level (I hoped to avoid the command line eboot=pci w/ the new BIOS but no chance, that parameter is necessary to avoid

Get someone to write a proper, specific bug report that could be sent to a BIOS engineer, pinpointing what is wrong and what should be fixed, and either I or the SuSE people can forward it to Lenovo.

Signature · 4 lines
  "One disk to rule them all, One disk to find them. One disk to bring
  them all and in the darkness grind them. In the Land of Redmond
  where the shadows lie." -- The Silicon Valley Tarot
  Henrique Holschuh