ppc/p4080: Add p4080 platform immap definitions
PATCH v3 1/7 ppc/p4080: Add p4080 platform immap definitions
The p4080 SoC has a significant amount of commonality with the 85xx/PQ3 platform. We reuse the 85xx immap and just add new definitions for local access and global utils. The global utils is now broken into global utils, clocking and run control/power management.
The offsets from CCSR for a number of blocks have also changed. We introduce the CONFIG_FSL_CORENET define to distinquish the PQ3 style of platform from the new p4080 platform. We don't use QoirQ as there are products (like p2020) that are PQ3 based platforms but have the QoirQ name.
---
* Moved LAWs to be an array
include/asm-ppc/fsl_lbc.h | 4 + include/asm-ppc/immap_85xx.h | 287 +++++++++++++++++++++++++++++++++++++++--- 2 files changed, 271 insertions(+), 20 deletions(-)
include/asm-ppc/fsl_lbc.h +4 -0
@@ -317,6 +317,10 @@#define LCRR_CLKDIV_2 0x00000002#define LCRR_CLKDIV_4 0x00000004#define LCRR_CLKDIV_8 0x00000008 +#elif defined(CONFIG_FSL_CORENET ) +#define LCRR_CLKDIV_8 0x00000002 +#define LCRR_CLKDIV_16 0x00000004 +#define LCRR_CLKDIV_32 0x00000008#else #define LCRR_CLKDIV_4 0x00000002#define LCRR_CLKDIV_8 0x00000004
include/asm-ppc/immap_85xx.h +267 -20
328 lines not on this page · raw message
Signature · 1 line
1.6.0.6
PATCH v3 2/7 ppc/p4080: Add support for CoreNet style platform LAWs
On CoreNet based platforms the LAW address is split between an high & low register and we no longer shift the address. Also, the target IDs on CoreNet platforms have been completely re-assigned.
Additionally, added a new find_law() API to which LAW an address hits in. This is need for the CoreNet style boot release code since it will need to determine what the target ID should be set to for boot window translation.
---
* Updated based on LAWs being an array
drivers/misc/fsl_law.c | 94 ++++++++++++++++++++++++++++++++++++++++++++- include/asm-ppc/fsl_law.h | 31 +++++++++++++++ 2 files changed, 123 insertions(+), 2 deletions(-)
drivers/misc/fsl_law.c +92 -2
@@ -1,5 +1,5 @@/* -* Copyright 2008 Freescale Semiconductor, Inc. +* Copyright 2008-2009 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
@@ -29,7 +29,6 @@DECLARE_GLOBAL_DATA_PTR ; -#define LAWAR_EN 0x80000000/* number of LAWs in the hw implementation */ #if defined(CONFIG_MPC8540 ) || defined(CONFIG_MPC8541 ) || \ defined(CONFIG_MPC8560 ) || defined(CONFIG_MPC8555 )
@@ -48,6 +47,20 @@ DECLARE_GLOBAL_DATA_PTR;void set_law (u8 idx,phys_addr_t addr,enum law_size sz,enum law_trgt_if id) { +#ifdef CONFIG_FSL_CORENET +volatile ccsr_local_t *ccm = + (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR ); + + gd->used_laws |= (1 << idx); + +out_be32 (&ccm->law[idx].lawar,0 ); +out_be32 (&ccm->law[idx].lawbarh, ((u64 )addr >>32 )); +out_be32 (&ccm->law[idx].lawbarl, addr &0xffffffff ); +out_be32 (&ccm->law[idx].lawar,LAWAR_EN | ((u32 )id <<20 ) | (u32 )sz); + +/* Read back so that we sync the writes */ +in_be32 (&ccm->law[idx].lawar); +#else volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR +0xc08 );volatile u32 *lawbar = base +8 * idx;volatile u32 *lawar = base +8 * idx +2 ;
@@ -60,6 +73,7 @@ void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)/* Read back so that we sync the writes */ in_be32 (lawar); +#endif }int set_next_law (phys_addr_t addr,enum law_size sz,enum law_trgt_if id)
@@ -96,6 +110,19 @@ int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)void disable_law (u8 idx) { +#ifdef CONFIG_FSL_CORENET +volatile ccsr_local_t *ccm = + (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR ); + + gd->used_laws &= ~(1 << idx); + +out_be32 (&ccm->law[idx].lawar,0 ); +out_be32 (&ccm->law[idx].lawbarh,0 ); +out_be32 (&ccm->law[idx].lawbarl,0 ); + +/* Read back so that we sync the writes */ +in_be32 (&ccm->law[idx].lawar); +#else volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR +0xc08 );volatile u32 *lawbar = base +8 * idx;volatile u32 *lawar = base +8 * idx +2 ;
@@ -105,9 +132,66 @@ void disable_law(u8 idx)out_be32 (lawar,0 );out_be32 (lawbar,0 ); +/* Read back so that we sync the writes */ +in_be32 (lawar); +#endif +return ; } +#ifdef CONFIG_FSL_CORENET +#define GET_LAW_ADDR ((u64)in_be32(lawbarh) << 32) | in_be32(lawbarl) +#else +#define GET_LAW_ADDR ((u64)in_be32(lawbar) << 12) +#endif + +struct law_entry find_law (phys_addr_t addr) +{ +struct law_entry entry; +int i; + + entry.index =-1 ; + entry.addr =0 ; + entry.size =0 ; + entry.trgt_id =0 ; + +for (i =0 ; i <FSL_HW_NUM_LAWS ; i++) { + +u64 upper; +u32 temp; +#ifdef CONFIG_FSL_CORENET +volatile ccsr_local_t *ccm; +volatile u32 *lawbarh, *lawbarl, *lawar; + + ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR ); + + lawbarh = &ccm->law[i].lawbarh; + lawbarl = &ccm->law[i].lawbarl; + lawar = &ccm->law[i].lawar; +#else +volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR +0xc08 ); +volatile u32 *lawbar = base +8 * i; +volatile u32 *lawar = base +8 * i +2 ; +#endif + temp =in_be32 (lawar); + +if (!(temp &LAWAR_EN )) +continue ; + + entry.addr =GET_LAW_ADDR ; + entry.size = temp &0x3f ; + entry.trgt_id = (temp >>20 ) &0xff ; + + upper = entry.addr + (2ull << entry.size); +if ((addr >= entry.addr) && (addr < upper)) { + entry.index = i; +break ; + } + } + +return entry; +} +void print_laws (void ) {volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR +0xc08 );
@@ -173,7 +257,13 @@ void init_laws(void) {int i; +#if FSL_HW_NUM_LAWS <32 gd->used_laws = ~((1 <<FSL_HW_NUM_LAWS ) -1 ); +#elif FSL_HW_NUM_LAWS ==32 + gd->used_laws =0 ; +#else +#error FSL_HW_NUM_LAWS can not be greater than 32 w/o code changes +#endif for (i =0 ; i < num_law_entries; i++) {if (law_table[i].index ==-1 )
include/asm-ppc/fsl_law.h +31 -0
@@ -1,8 +1,18 @@ +/* +* Copyright 2008-2009 Freescale Semiconductor, Inc. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* Version 2 as published by the Free Software Foundation. +*/ +#ifndef _FSL_LAW_H_#define _FSL_LAW_H_#include <asm/io.h> +#define LAWAR_EN 0x80000000 +#define SET_LAW_ENTRY (idx, a, sz, trgt) \ { .index = idx, .addr = a, .size = sz, .trgt_id = trgt }
@@ -36,6 +46,25 @@ enum law_size { LAW_SIZE_32G, }; +#ifdef CONFIG_FSL_CORENET +enum law_trgt_if { +LAW_TRGT_IF_PCIE_1 =0x00 , +LAW_TRGT_IF_PCIE_2 =0x01 , +LAW_TRGT_IF_PCIE_3 =0x02 , +LAW_TRGT_IF_RIO_1 =0x08 , +LAW_TRGT_IF_RIO_2 =0x09 , + +LAW_TRGT_IF_DDR_1 =0x10 , +LAW_TRGT_IF_DDR_2 =0x11 ,/* 2nd controller */ +LAW_TRGT_IF_DDR_INTRLV =0x14 , + +LAW_TRGT_IF_BMAN =0x18 , +LAW_TRGT_IF_DCSR =0x1d , +LAW_TRGT_IF_LBC =0x1f , +LAW_TRGT_IF_QMAN =0x3c , +}; +#define LAW_TRGT_IF_DDR LAW_TRGT_IF_DDR_1 +#else enum law_trgt_if {LAW_TRGT_IF_PCI =0x00 , LAW_TRGT_IF_PCI_2 = 0x01,
@@ -64,6 +93,7 @@ enum law_trgt_if {#if defined(CONFIG_MPC8572 ) || defined(CONFIG_P2020 )#define LAW_TRGT_IF_PCIE_3 LAW_TRGT_IF_PCI#endif +#endif /* CONFIG_FSL_CORENET */ struct law_entry {int index;
@@ -76,6 +106,7 @@ extern void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_ifextern int set_next_law (phys_addr_t addr,enum law_size sz,enum law_trgt_if id);extern int set_last_law (phys_addr_t addr,enum law_size sz,enum law_trgt_if id);extern int set_ddr_laws (u64 start,u64 sz,enum law_trgt_if id); +extern struct law_entry find_law (phys_addr_t addr);extern void disable_law (u8 idx);extern void init_laws (void );extern void print_laws (void );
Signature · 1 line
1.6.0.6
PATCH v3 3/7 ppc/p4080: CoreNet platfrom style CCSRBAR setting
On CoreNet based platforms the CCSRBAR address is split between an high & low register and we no longer shift the address.
---
* Updated based on LAWs being an array
cpu/mpc85xx/cpu_init_early.c | 29 +++++++++++++++++++++++++++++ 1 files changed, 29 insertions(+), 0 deletions(-)
cpu/mpc85xx/cpu_init_early.c +29 -0
@@ -54,6 +54,9 @@ void cpu_init_early_f(void)u32 temp;volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR +0x1000 ); +#ifdef CONFIG_FSL_CORENET +volatile ccsr_local_t *ccm; +#endif mas0 =MAS0_TLBSEL (0 ) |MAS0_ESEL (1 );/* mas1 is the same as above */
@@ -64,9 +67,35 @@ void cpu_init_early_f(void)write_tlb (mas0, mas1, mas2, mas3, mas7); +#ifdef CONFIG_FSL_CORENET +/* +* We can't call set_law() because we haven't moved +* CCSR yet. +*/ + ccm = (void *)ccsr_virt; + +out_be32 (&ccm->law[0 ].lawbarh, + (u64 )CONFIG_SYS_CCSRBAR_PHYS >>32 ); +out_be32 (&ccm->law[0 ].lawbarl, (u32 )CONFIG_SYS_CCSRBAR_PHYS ); +out_be32 (&ccm->law[0 ].lawar, +LAWAR_EN | (0x1e <<20 ) |LAW_SIZE_4K ); + +in_be32 ((u32 *)(ccsr_virt +0 )); +in_be32 ((u32 *)(ccsr_virt +1 )); +isync (); + + ccm = (void *)CONFIG_SYS_CCSRBAR ; +/* Now use the temporary LAW to move CCSR */ +out_be32 (&ccm->ccsrbarh, (u64 )CONFIG_SYS_CCSRBAR_PHYS >>32 ); +out_be32 (&ccm->ccsrbarl, (u32 )CONFIG_SYS_CCSRBAR_PHYS ); +out_be32 (&ccm->ccsrar,CCSRAR_C ); + temp =in_be32 (&ccm->ccsrar); +disable_law (0 ); +#else temp =in_be32 (ccsr_virt);out_be32 (ccsr_virt,CONFIG_SYS_CCSRBAR_PHYS >>12 ); temp =in_be32 ((volatile u32 *)CONFIG_SYS_CCSRBAR ); +#endif }#endif
Signature · 1 line
1.6.0.6
PATCH v3 4/7 ppc/p4080: CoreNet platfrom style secondary core release
The CoreNet platform style of bringing secondary cores out of reset is a bit different that the PQ3 style. Mostly the registers that we use to setup boot translation, enable time bases, and boot release the cores have moved around.
--- cpu/mpc85xx/mp.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 67 insertions(+), 1 deletions(-)
cpu/mpc85xx/mp.c +67 -1
@@ -26,6 +26,7 @@#include <lmb.h> #include <asm/io.h> #include <asm/mmu.h> +#include <asm/fsl_law.h> #include "mp.h" DECLARE_GLOBAL_DATA_PTR ;
@@ -135,6 +136,66 @@ ulong get_spin_addr(void)return addr; } +#ifdef CONFIG_FSL_CORENET +static void corenet_mp_up (unsigned long bootpg) +{ +u32 up, cpu_up_mask, whoami; +u32 *table = (u32 *)get_spin_addr (); +volatile ccsr_gur_t *gur; +volatile ccsr_local_t *ccm; +volatile ccsr_rcpm_t *rcpm; +volatile ccsr_pic_t *pic; +int timeout =10 ; +u32 nr_cpus; +struct law_entry e; + + gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR ); + rcpm = (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR ); + pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR); + + nr_cpus = ((in_be32 (&pic->frr) >>8 ) &0xff ) +1 ; + + whoami =in_be32 (&pic->whoami); + cpu_up_mask =1 << whoami; +out_be32 (&ccm->bstrl, bootpg); + + e =find_law (bootpg); +out_be32 (&ccm->bstrar,LAWAR_EN | e.trgt_id <<20 |LAWAR_SIZE_4K ); + +/* disable time base@the platform */ +out_be32 (&rcpm->ctbenrl, cpu_up_mask); + +/* release the hounds */ + up = ((1 << nr_cpus) -1 ); +out_be32 (&gur->brrl, up); + +/* wait for everyone */ +while (timeout) { +int i; +for (i =0 ; i < nr_cpus; i++) { +if (table[i *NUM_BOOT_ENTRY +BOOT_ENTRY_ADDR_LOWER ]) + cpu_up_mask |= (1 << i); + }; + +if ((cpu_up_mask & up) == up) +break ; + +udelay (100 ); + timeout--; + } + +if (timeout ==0 ) +printf ("CPU up timeout. CPU up mask is %x should be %x\n" , + cpu_up_mask, up); + +/* enable time base@the platform */ +out_be32 (&rcpm->ctbenrl,0 ); +mtspr (SPRN_TBWU ,0 ); +mtspr (SPRN_TBWL ,0 ); +out_be32 (&rcpm->ctbenrl, (1 << nr_cpus) -1 ); +} +#else static void pq3_mp_up (unsigned long bootpg) {u32 up, cpu_up_mask, whoami;
@@ -196,6 +257,7 @@ static void pq3_mp_up(unsigned long bootpg) devdisr &= ~(MPC85xx_DEVDISR_TB0 | MPC85xx_DEVDISR_TB1); out_be32(&gur->devdisr, devdisr); } +#endif void cpu_mp_lmb_reserve (struct lmb *lmb) {
@@ -217,7 +279,7 @@ void setup_mp(void)if (i !=-1 ) {/* map reset page to bootpg so we can copy code there */ disable_tlb (i); - +set_tlb (1 ,0xfffff000 , bootpg,/* tlb, epn, rpn */ MAS3_SX |MAS3_SW |MAS3_SR ,MAS2_M ,/* perms, wimge */ 0 , i,BOOKE_PAGESZ_4K ,1 );/* ts, esel, tsize, iprot */
@@ -234,7 +296,11 @@ void setup_mp(void)MAS3_SX |MAS3_SW |MAS3_SR ,MAS2_I ,/* perms, wimge */ 0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */ +#ifdef CONFIG_FSL_CORENET +corenet_mp_up (bootpg); +#else pq3_mp_up (bootpg); +#endif }else {puts ("WARNING: No reset page TLB. " "Skipping secondary core setup\n" );
Signature · 1 line
1.6.0.6
PATCH v3 5/7 ppc/p4080: Add various p4080 related defines (and p4040)
There are various locations that we have chip specific info:
* Makefile for which ddr code to build
* Added p4080 & p4040 to cpu_type_list and SVR list
* Added number of LAWs for p4080
* Set CONFIG_MAX_CPUS to 8 for p4080
--- cpu/mpc85xx/Makefile | 1 + cpu/mpc8xxx/cpu.c | 4 ++++ drivers/misc/fsl_law.c | 2 ++ include/asm-ppc/config.h | 6 ++++-- include/asm-ppc/processor.h | 4 ++++ 5 files changed, 15 insertions(+), 2 deletions(-)
cpu/mpc85xx/Makefile +1 -0
@@ -53,6 +53,7 @@ COBJS-$(CONFIG_P1011) += ddr-gen3.o COBJS-$(CONFIG_P1020) += ddr-gen3.o COBJS-$(CONFIG_P2010) += ddr-gen3.o COBJS-$(CONFIG_P2020) += ddr-gen3.o +COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o COBJS-$(CONFIG_CPM2) += ether_fcc.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
cpu/mpc8xxx/cpu.c +4 -0
@@ -72,6 +72,10 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(P2010, P2010_E, 1), CPU_TYPE_ENTRY(P2020, P2020, 2), CPU_TYPE_ENTRY(P2020, P2020_E, 2), + CPU_TYPE_ENTRY(P4040, P4040, 4), + CPU_TYPE_ENTRY(P4040, P4040_E, 4), + CPU_TYPE_ENTRY(P4080, P4080, 8), + CPU_TYPE_ENTRY(P4080, P4080_E, 8), #elif defined(CONFIG_MPC86xx)CPU_TYPE_ENTRY (8610 ,8610 ,1 ), CPU_TYPE_ENTRY(8641, 8641, 2),
drivers/misc/fsl_law.c +2 -0
@@ -41,6 +41,8 @@ DECLARE_GLOBAL_DATA_PTR;defined (CONFIG_P1011 ) ||defined (CONFIG_P1020 ) || \ defined(CONFIG_P2010) || defined(CONFIG_P2020)#define FSL_HW_NUM_LAWS 12 +#elif defined(CONFIG_PPC_P4080 ) +#define FSL_HW_NUM_LAWS 32#else #error FSL_HW_NUM_LAWS not defined for this platform#endif
include/asm-ppc/config.h +4 -2
@@ -40,9 +40,11 @@#if defined(CONFIG_MPC8572 ) || defined(CONFIG_P1020 ) || \ defined(CONFIG_P2020 ) || defined(CONFIG_MPC8641 ) -#define CONFIG_MAX_CPUS 2 +#define CONFIG_MAX_CPUS 2 +#elif defined(CONFIG_PPC_P4080 ) +#define CONFIG_MAX_CPUS 8#else -#define CONFIG_MAX_CPUS 1 +#define CONFIG_MAX_CPUS 1#endif #endif /* _ASM_CONFIG_H_ */
include/asm-ppc/processor.h +4 -0
@@ -1031,6 +1031,10 @@#define SVR_P2010_E 0x80EB00#define SVR_P2020 0x80E200#define SVR_P2020_E 0x80EA00 +#define SVR_P4040 0x820100 +#define SVR_P4040_E 0x820900 +#define SVR_P4080 0x820000 +#define SVR_P4080_E 0x820800#define SVR_8610 0x80A000#define SVR_8641 0x809000
Signature · 1 line
1.6.0.6
PATCH v3 6/7 ppc/p4080: Handle timebase enabling and frequency reporting
On CoreNet style platforms the timebase frequency is the bus frequency defined by 16 (on PQ3 it is divide by 8). Also on the CoreNet platforms the core not longer controls the enabling of the timebase. We now need to enable the boot core's timebase via CCSR register writes.
---
* Used get_tbclk() in fdt code to remove #ifdef
cpu/mpc85xx/cpu.c | 4 ++++ cpu/mpc85xx/cpu_init.c | 12 ++++++++++++ cpu/mpc85xx/fdt.c | 4 ++-- 3 files changed, 18 insertions(+), 2 deletions(-)
cpu/mpc85xx/cpu.c +4 -0
@@ -184,7 +184,11 @@ int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])*/ unsigned long get_tbclk (void ) { +#ifdef CONFIG_FSL_CORENET +return (gd->bus_clk +8 ) /16 ; +#else return (gd->bus_clk +4UL )/8UL ; +#endif }
cpu/mpc85xx/cpu_init.c +12 -0
@@ -229,6 +229,18 @@ void cpu_init_f (void)#if defined(CONFIG_FSL_DMA )dma_init ();#endif +#ifdef CONFIG_FSL_CORENET + { +volatile ccsr_rcpm_t *rcpm = + (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR ); +volatile ccsr_pic_t *pic = + (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR); +u32 whoami =in_be32 (&pic->whoami); + +/* Enable the timebase register for this core */ +out_be32 (&rcpm->ctbenrl, (1 << whoami)); + } +#endif }
cpu/mpc85xx/fdt.c +2 -2
@@ -1,5 +1,5 @@/* -* Copyright 2007 Freescale Semiconductor, Inc. +* Copyright 2007-2009 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, [email protected].
@@ -287,7 +287,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)fdt_add_enet_stashing (blob);do_fixup_by_prop_u32 (blob,"device_type" ,"cpu" ,4 , -"timebase-frequency" , bd->bi_busfreq /8 ,1 ); +"timebase-frequency" ,get_tbclk (),1 );do_fixup_by_prop_u32 (blob,"device_type" ,"cpu" ,4 ,"bus-frequency" , bd->bi_busfreq,1 );get_sys_info (&sysinfo);
Signature · 1 line
1.6.0.6
PATCH v3 7/7 ppc/p4080: Determine various chip frequencies on CoreNet platforms
The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block.
--- cpu/mpc85xx/cpu.c | 29 +++++++++++++++++ cpu/mpc85xx/speed.c | 85 +++++++++++++++++++++++++++++++++++++++++++++++++++ include/e500.h | 6 +++ 3 files changed, 120 insertions(+), 0 deletions(-)
cpu/mpc85xx/cpu.c +29 -0
@@ -46,11 +46,20 @@ int checkcpu (void)char buf1[32 ], buf2[32 ];#ifdef CONFIG_DDR_CLK_FREQ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#ifdef CONFIG_FSL_CORENET +u32 ddr_sync = ((gur->rcwsr[5 ]) &FSL_CORENET_RCWSR5_DDR_SYNC ) + >>FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT ; +#else u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; +#endif +#else +#ifdef CONFIG_FSL_CORENET +u32 ddr_sync =0 ;#else u32 ddr_ratio =0 ;#endif +#endif int i; svr =get_svr ();
@@ -111,6 +120,16 @@ int checkcpu (void) }printf ("\n CCB:%-4s MHz,\n" ,strmhz (buf1, sysinfo.freqSystemBus)); +#ifdef CONFIG_FSL_CORENET +if (ddr_sync ==1 ) +printf (" DDR:%-4s MHz (%s MT/s data rate) (Synchronous), " , +strmhz (buf1, sysinfo.freqDDRBus/2 ), +strmhz (buf2, sysinfo.freqDDRBus)); +else +printf (" DDR:%-4s MHz (%s MT/s data rate) (Asynchronous), " , +strmhz (buf1, sysinfo.freqDDRBus/2 ), +strmhz (buf2, sysinfo.freqDDRBus)); +#else switch (ddr_ratio) {case 0x0 : printf(" DDR:%-4s MHz (%s MT/s data rate), ",
@@ -128,6 +147,7 @@ int checkcpu (void) strmhz(buf2, sysinfo.freqDDRBus)); break; } +#endif if (sysinfo.freqLocalBus >LCRR_CLKDIV )printf ("LBC:%-4s MHz\n" ,strmhz (buf1, sysinfo.freqLocalBus));
@@ -143,6 +163,15 @@ int checkcpu (void)printf (" QE:%-4s MHz\n" ,strmhz (buf1, sysinfo.freqQE));#endif +#ifdef CONFIG_SYS_DPAA_FMAN +for (i =0 ; i <CONFIG_SYS_NUM_FMAN ; i++) +printf (" FMAN%d: %s MHz\n" , i,strmhz (buf1, sysinfo.freqFMan[i])); +#endif + +#ifdef CONFIG_SYS_DPAA_PME +printf (" PME: %s MHz\n" ,strmhz (buf1, sysinfo.freqPME)); +#endif +puts ("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n" );return 0 ;
cpu/mpc85xx/speed.c +85 -0
102 lines not on this page · raw message
include/e500.h +6 -0
@@ -15,6 +15,12 @@ typedef structunsigned long freqDDRBus;unsigned long freqLocalBus;unsigned long freqQE; +#ifdef CONFIG_SYS_DPAA_FMAN +unsigned long freqFMan[CONFIG_SYS_NUM_FMAN ]; +#endif +#ifdef CONFIG_SYS_DPAA_PME +unsigned long freqPME; +#endif } MPC85xx_SYS_INFO;#endif /* _ASMLANGUAGE */
Signature · 1 line
1.6.0.6
PATCH v3 2/7 ppc/p4080: Add support for CoreNet style platform LAWs
In reply to Kumar GalaDear Kumar Gala,
Quoted 10 lines · In message <[email protected]> you…
On CoreNet based platforms the LAW address is split between an high & low register and we no longer shift the address. Also, the target IDs on CoreNet platforms have been completely re-assigned.
Additionally, added a new
find_law()API to which LAW an address hits in. This is need for the CoreNet style boot release code since it will need to determine what the target ID should be set to for boot window translation.Signed-off-by Kumar Gala <[email protected]>
...
Quoted 9 lines
void
set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id){drivers/misc/fsl_law.c +7
-0+#ifdef CONFIG_FSL_CORENET +volatile ccsr_local_t *ccm = + (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR ); + + gd->used_laws |= (1 << idx); + +out_be32 (&ccm->law[idx].lawar,0 );
drivers/misc/fsl_law.c DECLARE_GLOBAL_DATA_PTR; · line 66
Quoted 10 lines
drivers/misc/fsl_law.c +7
-0+out_be32 (&ccm->law[idx].lawbarh, ((u64 )addr >>32 )); +out_be32 (&ccm->law[idx].lawbarl, addr &0xffffffff ); +out_be32 (&ccm->law[idx].lawar,LAWAR_EN | ((u32 )id <<20 ) | (u32 )sz); + +/* Read back so that we sync the writes */ +in_be32 (&ccm->law[idx].lawar); +#else volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR +0xc08 );volatile u32 *lawbar = base +8 * idx;volatile u32 *lawar = base +8 * idx +2 ;
Now we have variable declarations after code (ok, #ifdef'ed code, but anyway). Please don't do that. Please check everywhere.
Quoted 1 line
...
drivers/misc/fsl_law.c void disable_law(u8 idx) · line 159
Quoted 12 lines
drivers/misc/fsl_law.c +12
-0+struct law_entry find_law (phys_addr_t addr) +{ +struct law_entry entry; +int i; + + entry.index =-1 ; + entry.addr =0 ; + entry.size =0 ; + entry.trgt_id =0 ; + +for (i =0 ; i <FSL_HW_NUM_LAWS ; i++) { +
Please add a space after the "for", and drop the empty line.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Conceptual integrity in turn dictates that the design must proceed from one mind, or from a very small number of agreeing resonant minds. - Frederick Brooks Jr., "The Mythical Man Month"
PATCH v3 1/7 ppc/p4080: Add p4080 platform immap definitions
In reply to Kumar GalaDear Kumar Gala,
Quoted 12 lines · In message <[email protected]> you…
The p4080 SoC has a significant amount of commonality with the 85xx/PQ3 platform. We reuse the 85xx immap and just add new definitions for local access and global utils. The global utils is now broken into global utils, clocking and run control/power management.
The offsets from CCSR for a number of blocks have also changed. We introduce the
CONFIG_FSL_CORENETdefine to distinquish the PQ3 style of platform from the new p4080 platform. We don't use QoirQ as there are products (like p2020) that are PQ3 based platforms but have the QoirQ name.Signed-off-by Kumar Gala <[email protected]>
...
include/asm-ppc/immap_85xx.h line 22
Quoted 4 lines
include/asm-ppc/immap_85xx.h +4
-0+typedef struct ccsr_local { + u32 ccsrbarh; /* 0x0 - Control Configuration Status Registers Base Address Register High */ + u32 ccsrbarl; /* 0x4 - Control Configuration Status Registers Base Address Register Low */ + u32 ccsrar; /* 0x8 - Configuration, Control, and Status Attribute Register */
Lines too long. Please check globally.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Microsoft Compatibility:
your old Windows 3.11 application crash exactly as the new ones.