Skip to contentSkip to conversation

omap3: ehci: remove chargepump hack

PATCH In review Anand Gadiyar 3 participants 6 messages Sep 24, 2009 – Sep 30, 2009

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 omap3: ehci: remove chargepump hack

omap3: ehci: remove chargepump hack

This hack was for a very early development board that is no longer in use. Remove it. No board should require it.

---

arch/arm/mach-omap2/board-3430sdp.c +0 -1
index 5f913c3..5571f44 100644
@@ -486,7 +486,6 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
-	.chargepump = true,
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 57,
 	.reset_gpio_port[1]  = 61,
arch/arm/mach-omap2/board-omap3beagle.c +0 -1
index aa403e6..f81141f 100644
@@ -406,7 +406,6 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
-	.chargepump = false,
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
 	.reset_gpio_port[1]  = 147,
arch/arm/mach-omap2/board-omap3evm.c +0 -1
index 62a6f32..a2fcd06 100644
@@ -299,7 +299,6 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
-	.chargepump = false,
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
 	.reset_gpio_port[1]  = 135,
arch/arm/mach-omap2/board-omap3pandora.c +0 -1
index 9f115dc..fd4a951 100644
@@ -389,7 +389,6 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
-	.chargepump = false,
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 16,
 	.reset_gpio_port[1]  = -EINVAL,
arch/arm/mach-omap2/board-overo.c +0 -1
index d16172d..46e376f 100644
@@ -389,7 +389,6 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
-	.chargepump = false,
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
 	.reset_gpio_port[1]  = OVERO_GPIO_USBH_NRESET,
arch/arm/plat-omap/include/mach/usb.h +0 -1
index d1b14cc..a4068a4 100644
@@ -14,7 +14,6 @@ enum ehci_hcd_omap_mode {
 
 struct ehci_hcd_omap_platform_data {
 	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
-	unsigned			chargepump:1;
 	unsigned			phy_reset:1;
 
 	/* have to be valid if phy_reset is true and portx is in phy mode */
drivers/usb/host/ehci-omap.c +0 -22
index 36fb183..f2771cf 100644
@@ -169,9 +169,6 @@ struct ehci_hcd_omap {
 	/* phy reset workaround */
 	int			phy_reset;
 
-	/* vbus internal chargepump workaround */
-	int			chargepump;
-
 	/* desired phy_mode: TLL, PHY */
 	enum ehci_hcd_omap_mode	port_mode[OMAP3_HS_USB_PORTS];
 
@@ -423,25 +420,6 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 			gpio_set_value(omap->reset_gpio_port[1], 1);
 	}
 
-	if (omap->chargepump) {
-
-		/* Refer ISSUE2: LINK assumes external charge pump */
-
-		/* use Port1 VBUS to charge externally Port2:
-		 *	So for PHY mode operation use Port2 only
-		 */
-		ehci_omap_writel(omap->ehci_base, EHCI_INSNREG05_ULPI,
-				/* OTG ctrl reg*/
-				(0xa << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |
-				/*   Write */
-				(2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |
-				/* Port1 */
-				(1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |
-				/* Start */
-				(1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |
-				(0x26));
-	}
-
 	return 0;
 
 err_sys_status:
#1 lore raw
Quoted 4 lines · ext Anand Gadiyar

omap3: ehci: remove chargepump hack

This hack was for a very early development board that is no longer in use. Remove it. No board should require it.

do we have anyone using it besides development boards ?

Signature · 1 line
balbi
#2 lore raw
Quoted 8 lines · ext Anand Gadiyar
Quoted 4 lines

omap3: ehci: remove chargepump hack

This hack was for a very early development board that is no longer in use. Remove it. No board should require it.

do we have anyone using it besides development boards ?

Not sure I understand the question. If you meant "is anyone other than development boards using the chargepump hack", then the short answer is no.

The chargepump hack was only for one particular reference design board - the very first version of it. Only 6-odd boards were made which needed that hack. It's long gone from internal codebases, as are the boards.

As far as I know, no board in the wild will need it. If you look at the patch, only the 3430 SDP board set this flag to true, and all others were false. I confirm that all later versions of the expansion board in use with the 3430SDP do not require this hack.

So there's no point having it around.

- Anand

Acked-by
#3 lore raw
Quoted 16 lines · Anand
Quoted 8 lines · ext Anand Gadiyar
Quoted 4 lines

omap3: ehci: remove chargepump hack

This hack was for a very early development board that is no longer in use. Remove it. No board should require it.

do we have anyone using it besides development boards ?

Not sure I understand the question. If you meant "is anyone other than development boards using the chargepump hack", then the short answer is no.

The chargepump hack was only for one particular reference design board - the very first version of it. Only 6-odd boards were made which needed that hack. It's long gone from internal codebases, as are the boards.

Quoted 6 lines

As far as I know, no board in the wild will need it. If you look at the patch, only the 3430 SDP board set this flag to true, and all others were false. I confirm that all later versions of the expansion board in use with the 3430SDP do not require this hack.

So there's no point having it around.

good, so:

Signature · 1 line
balbi
maintainer
#5 lore raw

PATCH 1/1 omap3: ehci: remove chargepump hack

In reply to Anand Gadiyar

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Branch in linux-omap: ehci

Initial commit ID (Likely to change): 8aab384eab253c463f3eafae1c19bc44f744cdca

PatchWorks
http://patchwork.kernel.org/patch/49837/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=8aab384eab253c463f3eafae1c19bc44f744cdca