Skip to contentSkip to conversation

MPT Fusion SAS 2.6.31 regression, crash on heavy load

DISCUSSION Denys Fedoryschenko 1 participant 1 message Sep 28, 2009 SCSI

lore
Share & tools
lore
#0 lore raw

Filled a bugzilla entry, no answer for 3 days, and at same time it is clear regression.
http://bugzilla.kernel.org/show_bug.cgi?id=14242

While on 2.6.30.5 MPT SAS controller worked fine, on 2.6.31 it fails on heavy operations and start spitting errors to dmesg (they vary). Failsystems also stopped, and i am unable to reboot box properly (only over sysrq or hardreset).

x86, Sun Fire X4100, 8 GB RAM, PAE kernel enabled, module loaded with default options

I upgrade BIOS, LSI controller BIOS to latest version, it didn't fix the bug. I cannot do bisection, because this is loaded server and semi-embedded system. But i can do tests of patches or reverse specific commits, if you point me to exact commit.

http://www.nuclearcat.com/files/dmesg.ok from 2.6.30.5 kernel
http://www.nuclearcat.com/files/dmesg.fail from 2.6.31.1 kernel
http://www.nuclearcat.com/files/config.gz config from 2.6.31.1 kernel

Let me know if you need any additional information.

Additionally - i have few other similar units (X4100), but with less amount of RAM (4GB),HDD's(2 only), less load (but still enough heavy at some moments) working ok.

Please CC me on answers, i am not subscribed at any SCSI/LSI list.