trivial fix of a very frequent spelling mistake
Subsystems (15)
PATCH 1/1 trivial fix of a very frequent spelling mistake
something-bility is spelled as something-blity
so a grep for 'blit' would find these lines
this is so trivial that I didn't split it by subsystem / copy additional maintainers - all changes are to comments The only purpose is to get fewer false positives when grepping around the kernel sources.
--- arch/parisc/kernel/perf.c | 2 +- arch/powerpc/kernel/vdso.c | 2 +- arch/powerpc/oprofile/op_model_cell.c | 2 +- drivers/char/tty_ioctl.c | 2 +- drivers/isdn/i4l/isdn_net.c | 2 +- drivers/md/dm-crypt.c | 2 +- drivers/media/dvb/dvb-core/dvb_net.c | 2 +- drivers/net/tokenring/ibmtr.c | 2 +- drivers/net/wireless/orinoco/hermes_dld.c | 4 ++-- drivers/scsi/3w-9xxx.c | 2 +- drivers/scsi/3w-xxxx.c | 2 +- drivers/scsi/nsp32.c | 2 +- drivers/staging/comedi/drivers/cb_das16_cs.c | 2 +- drivers/staging/comedi/drivers/cb_pcidda.c | 2 +- drivers/staging/comedi/drivers/dmm32at.c | 2 +- drivers/staging/comedi/drivers/dt2814.c | 2 +- drivers/staging/comedi/drivers/dt282x.c | 4 ++-- drivers/staging/comedi/drivers/ni_atmio16d.c | 2 +- drivers/staging/comedi/drivers/ni_mio_common.c | 2 +- drivers/staging/comedi/drivers/ni_pcidio.c | 2 +- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 2 +- drivers/staging/comedi/drivers/rtd520.c | 2 +- drivers/staging/comedi/drivers/s626.c | 2 +- drivers/staging/comedi/drivers/skel.c | 2 +- drivers/staging/comedi/drivers/usbdux.c | 4 ++-- drivers/uwb/neh.c | 2 +- net/sched/act_api.c | 2 +- sound/pci/ice1712/juli.c | 2 +- 28 files changed, 31 insertions(+), 31 deletions(-)
arch/parisc/kernel/perf.c +1 -1
@@ -24,7 +24,7 @@* * This driver programs the PCX-U/PCX-W performance counters * on the PA-RISC 2.0 chips. The driver keeps all images now -* internally to the kernel to hopefully eliminate the possiblity +* internally to the kernel to hopefully eliminate the possibility * of a bad image halting the CPU. Also, there are different * images for the PCX-W and later chips vs the PCX-U chips. *
arch/powerpc/kernel/vdso.c +1 -1
@@ -712,7 +712,7 @@ static int __init vdso_init(void)#ifdef CONFIG_PPC64 /* -* Fill up the "systemcfg" stuff for backward compatiblity +* Fill up the "systemcfg" stuff for backward compatibility */ strcpy ((char *)vdso_data->eye_catcher,"SYSTEMCFG:PPC64" ); vdso_data->version.major =SYSTEMCFG_MAJOR ;
arch/powerpc/oprofile/op_model_cell.c +1 -1
@@ -248,7 +248,7 @@ static int pm_rtas_activate_signals(u32 node, u32 count)* There is no debug setup required for the cycles event. * Note that only events in the same group can be used. * Otherwise, there will be conflicts in correctly routing -* the signals on the debug bus. It is the responsiblity +* the signals on the debug bus. It is the responsibility * of the OProfile user tool to check the events are in * the same group. */
drivers/char/tty_ioctl.c +1 -1
@@ -315,7 +315,7 @@ EXPORT_SYMBOL(tty_termios_input_baud_rate);* For maximal back compatibility with legacy SYS5/POSIX *nix behaviour * we need to carefully set the bits when the user does not get the * desired speed. We allow small margins and preserve as much of possible -* of the input intent to keep compatiblity. +* of the input intent to keep compatibility. * * Locking: Caller should hold termios lock. This is already held * when calling this function from the driver termios handler.
drivers/isdn/i4l/isdn_net.c +1 -1
@@ -1563,7 +1563,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data) *(__be32 *)(p +4 ) =cpu_to_be32 (CISCO_SLARP_KEEPALIVE ); *(__be32 *)(p +8 ) =cpu_to_be32 (lp->cisco_myseq); *(__be32 *)(p +12 ) =cpu_to_be32 (lp->cisco_yourseq); - *(__be16 *)(p +16 ) =cpu_to_be16 (0xffff );// reliablity, always 0xffff + *(__be16 *)(p +16 ) =cpu_to_be16 (0xffff );// reliability, always 0xffff p +=18 ;isdn_net_write_super (lp, skb);
drivers/md/dm-crypt.c +1 -1
@@ -988,7 +988,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad_cipher; } -/* Compatiblity mode for old dm-crypt cipher strings */ +/* Compatibility mode for old dm-crypt cipher strings */ if (!chainmode || (strcmp (chainmode,"plain" ) ==0 && !ivmode)) { chainmode ="cbc" ; ivmode ="plain" ;
drivers/media/dvb/dvb-core/dvb_net.c +1 -1
@@ -1395,7 +1395,7 @@ static int dvb_net_do_ioctl(struct inode *inode, struct file *file,return ret; } -/* binary compatiblity cruft */ +/* binary compatibility cruft */ case __NET_ADD_IF_OLD: {struct __dvb_net_if_old *dvbnetif = parg;
drivers/net/tokenring/ibmtr.c +1 -1
@@ -96,7 +96,7 @@* * Change by Mike Sullivan et al.: * + added turbo card support. No need to use lanaid to configure -* the adapter into isa compatiblity mode. +* the adapter into isa compatibility mode. * * Changes by Burt Silverman to allow the computer to behave nicely when * a cable is pulled or not in place, or a PCMCIA card is removed hot.
drivers/net/wireless/orinoco/hermes_dld.c +2 -2
@@ -550,7 +550,7 @@ static const struct { \#define DEFAULT_PDR (pid) default_pdr_data_##pid -/* HWIF Compatiblity */ +/* HWIF Compatibility */ DEFINE_DEFAULT_PDR (0x0005 ,10 ,"\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00" );/* PPPPSign */
@@ -656,7 +656,7 @@ int hermes_apply_pda_with_defaults(hermes_t *hw, record_id + 1, pdi); }break ; -case 0x5 :/* HWIF Compatiblity */ +case 0x5 :/* HWIF Compatibility */ default_pdi = (struct pdi *) &DEFAULT_PDR (0x0005 );break ;case 0x108 :/* PPPPSign */
drivers/scsi/3w-9xxx.c +1 -1
@@ -732,7 +732,7 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned intbreak ;case TW_IOCTL_GET_COMPATIBILITY_INFO : tw_ioctl->driver_command.status =0 ; -/* Copy compatiblity struct into ioctl data buffer */ +/* Copy compatibility struct into ioctl data buffer */ tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer;memcpy (tw_compat_info, &tw_dev->tw_compat_info,sizeof (TW_Compatibility_Info));break ;
drivers/scsi/3w-xxxx.c +1 -1
@@ -8,7 +8,7 @@ Copyright (C) 1999-2009 3ware Inc. - Kernel compatiblity By: Andre Hedrick <[email protected]> + Kernel compatibility By: Andre Hedrick <[email protected]> Non-Copyright (C) 2000 Andre Hedrick <[email protected]> Further tiny build fixes and trivial hoovering Alan Cox
drivers/scsi/nsp32.c +1 -1
@@ -1419,7 +1419,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)nsp32_msg (KERN_ERR ,"Received unexpected BMCNTERR IRQ! " );/* * TODO: To be implemented improving bus master -* transfer reliablity when BMCNTERR is occurred in +* transfer reliability when BMCNTERR is occurred in * AutoSCSI phase described in specification. */ }
drivers/staging/comedi/drivers/cb_das16_cs.c +1 -1
@@ -395,7 +395,7 @@ static int das16cs_ai_cmdtest(struct comedi_device *dev,/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src !=TRIG_TIMER && cmd->scan_begin_src !=TRIG_EXT ) err++;
drivers/staging/comedi/drivers/cb_pcidda.c +1 -1
@@ -497,7 +497,7 @@ static int cb_pcidda_ai_cmdtest(struct comedi_device *dev,/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src !=TRIG_TIMER && cmd->scan_begin_src !=TRIG_EXT ) err++;
drivers/staging/comedi/drivers/dmm32at.c +1 -1
@@ -629,7 +629,7 @@ static int dmm32at_ai_cmdtest(struct comedi_device *dev,/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src !=TRIG_TIMER && cmd->scan_begin_src !=TRIG_EXT ) err++;
drivers/staging/comedi/drivers/dt2814.c +1 -1
@@ -175,7 +175,7 @@ static int dt2814_ai_cmdtest(struct comedi_device *dev,/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->stop_src !=TRIG_TIMER && cmd->stop_src !=TRIG_EXT ) err++;
drivers/staging/comedi/drivers/dt282x.c +2 -2
@@ -777,7 +777,7 @@ static int dt282x_ai_cmdtest(struct comedi_device *dev,/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src !=TRIG_FOLLOW && cmd->scan_begin_src !=TRIG_EXT ) err++;
@@ -1050,7 +1050,7 @@ static int dt282x_ao_cmdtest(struct comedi_device *dev,/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->stop_src !=TRIG_COUNT && cmd->stop_src !=TRIG_NONE ) err++;
drivers/staging/comedi/drivers/ni_atmio16d.c +1 -1
@@ -325,7 +325,7 @@ static int atmio16d_ai_cmdtest(struct comedi_device *dev,return 1 ;/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src !=TRIG_FOLLOW && cmd->scan_begin_src !=TRIG_EXT && cmd->scan_begin_src !=TRIG_TIMER )
drivers/staging/comedi/drivers/ni_mio_common.c +1 -1
@@ -2206,7 +2206,7 @@ static int ni_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->start_src !=TRIG_NOW && cmd->start_src !=TRIG_INT && cmd->start_src !=TRIG_EXT ) err++;
drivers/staging/comedi/drivers/ni_pcidio.c +1 -1
@@ -794,7 +794,7 @@ static int ni_pcidio_cmdtest(struct comedi_device *dev,/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->start_src !=TRIG_NOW && cmd->start_src !=TRIG_INT ) err++; if (cmd->scan_begin_src != TRIG_TIMER &&
drivers/staging/comedi/drivers/quatech_daqp_cs.c +1 -1
@@ -506,7 +506,7 @@ static int daqp_ai_cmdtest(struct comedi_device *dev,/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src !=TRIG_TIMER && cmd->scan_begin_src !=TRIG_FOLLOW ) err++;
drivers/staging/comedi/drivers/rtd520.c +1 -1
@@ -1768,7 +1768,7 @@ static int rtd_ai_cmdtest(struct comedi_device *dev,/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src !=TRIG_TIMER && cmd->scan_begin_src !=TRIG_EXT ) { err++;
drivers/staging/comedi/drivers/s626.c +1 -1
@@ -1926,7 +1926,7 @@ static int s626_ai_cmdtest(struct comedi_device *dev,/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src !=TRIG_TIMER && cmd->scan_begin_src !=TRIG_EXT && cmd->scan_begin_src !=TRIG_FOLLOW )
drivers/staging/comedi/drivers/skel.c +1 -1
@@ -399,7 +399,7 @@ static int skel_ai_cmdtest(struct comedi_device *dev,/* step 2: make sure trigger sources are unique and mutually compatible */ -/* note that mutual compatiblity is not an issue here */ +/* note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src !=TRIG_TIMER && cmd->scan_begin_src !=TRIG_EXT ) err++;
drivers/staging/comedi/drivers/usbdux.c +2 -2
@@ -979,7 +979,7 @@ static int usbdux_ai_cmdtest(struct comedi_device *dev,/* * step 2: make sure trigger sources are unique and mutually compatible -* note that mutual compatiblity is not an issue here +* note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src != TRIG_FOLLOW && cmd->scan_begin_src != TRIG_EXT &&
@@ -1557,7 +1557,7 @@ static int usbdux_ao_cmdtest(struct comedi_device *dev,/* * step 2: make sure trigger sources are unique and mutually compatible -* note that mutual compatiblity is not an issue here +* note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src != TRIG_FOLLOW && cmd->scan_begin_src != TRIG_EXT &&
drivers/uwb/neh.c +1 -1
@@ -150,7 +150,7 @@ void uwb_rc_neh_put(struct uwb_rc_neh *neh)* 0xff is invalid, so they must not be used. Initialization * fills up those two in the bitmap so they are not allocated. * -* We spread the allocation around to reduce the posiblity of two +* We spread the allocation around to reduce the possibility of two * consecutive opened @neh's getting the same context ID assigned (to * avoid surprises with late events that timed out long time ago). So * first we search from where @rc->ctx_roll is, if not found, we
net/sched/act_api.c +1 -1
@@ -598,7 +598,7 @@ int tcf_action_copy_stats(struct sk_buff *skb, struct tc_action *a, goto errout;/* compat_mode being true specifies a call that is supposed -* to add additional backward compatiblity statistic TLVs. +* to add additional backward compatibility statistic TLVs. */ if (compat_mode) {if (a->type ==TCA_OLD_COMPAT )
sound/pci/ice1712/juli.c +1 -1
@@ -380,7 +380,7 @@ static struct snd_kcontrol_new juli_mute_controls[] __devinitdata = {* inputs) are fed from Xilinx. * * I even checked traces on board and coded a support in driver for -* an alternative possiblity - the unused I2S ICE output channels +* an alternative possibility - the unused I2S ICE output channels * switched to HW-IN/SPDIF-IN and providing the monitoring signal to * the DAC - to no avail. The I2S outputs seem to be unconnected. *
Signature · 1 line
1.6.2.5
Quoted 7 lines · Dirk Hohndel
something-bility is spelled as something-blity
so a grep for 'blit' would find these linesthis is so trivial that I didn't split it by subsystem / copy additional maintainers - all changes are to comments The only purpose is to get fewer false positives when grepping around the kernel sources.
I will split out the drivers/staging part and forward it to Greg (*) and apply the rest to trivial queue.
(*) I try to avoid merging the trivial changes to staging drivers, as these are usually being changed/rewritten quite heavily and we'd get a lot of unnecessary conflicts in -next.
Thanks,
Signature · 2 lines
Jiri Kosina SUSE Labs, Novell Inc.