Skip to contentSkip to conversation

ppc4xx: Add SDRAM detection for PMC440 boards

PATCH New Matthias Fuchs 2 participants 2 messages Sep 30, 2009 – Oct 2, 2009

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ppc4xx: Add SDRAM detection for PMC440 boards

This patch adds support to detect the amount of DDR2 SDRAM on PMC440 modules. Detection is done by probing through a list of available and supported hardware configurations from 1GByte down to 256MB.

The static TLB entry is replaced by dynamically created entries.

---
V2: - remove duplicate comment
- fix commit message
- coding style cleanup

 board/esd/pmc440/init.S  |   11 ++----
 board/esd/pmc440/sdram.c |   82 ++++++++++++++++++++++++++++++++-------------
 include/configs/PMC440.h |    1 -
 3 files changed, 61 insertions(+), 33 deletions(-)
board/esd/pmc440/init.S +3 -8
index 26a8282..6585fed 100644
@@ -23,7 +23,7 @@
 #include <asm-ppc/mmu.h>
 #include <config.h>
 
-/**************************************************************************
+/*
  * TLB TABLE
  *
  * This table is used by the cpu boot code to setup the initial tlb
@@ -32,7 +32,7 @@
  *
  *  Pointer to the table is returned in r1
  *
- *************************************************************************/
+ */
     .section .bootpg,"ax"
     .globl tlbtab
 
@@ -49,12 +49,7 @@ tlbtab:
 	tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
 #endif
 
-	/* TLB-entry for DDR SDRAM (Up to 2GB) */
-#ifdef CONFIG_4xx_DCACHE
-	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
-#else
-	tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-#endif
+	/* TLB entries for DDR2 SDRAM are generated dynamically */
 
 #ifdef CONFIG_SYS_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
board/esd/pmc440/sdram.c +58 -24

121 lines not on this page · raw message

include/configs/PMC440.h +0 -1
index 012ae79..d6e2f6b 100644
@@ -215,7 +215,6 @@
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MBYTES_SDRAM	(256)	/* 256MB                        */
 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CONFIG_DDR_DATA_EYE	/* use DDR2 optimization        */
 #endif
Signature · 1 line
1.6.1
#1 lore raw

PATCH v2 1/1 ppc4xx: Add SDRAM detection for PMC440 boards

Quoted 6 lines · On Wednesday 30 September 2009 11:55:04 Matthias Fuchs wrote:

This patch adds support to detect the amount of DDR2 SDRAM on PMC440 modules. Detection is done by probing through a list of available and supported hardware configurations from 1GByte down to 256MB.

The static TLB entry is replaced by dynamically created entries.

Applied to u-boot-ppc4xx/master. Thanks.

Cheers,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de