Skip to contentSkip to conversation

x86: add show_lapic=

PATCH In review Yinghai Lu 3 participants 11 messages Sep 27, 2009 – Sep 30, 2009 x86

lore
Share & tools
lore

Yinghai Lu

author
#0 lore raw

PATCH 1/1 x86: add show_lapic=

so could use that together with apci=debug to print less cpu apic.

otherwise for system have more cpus will take a while

also move apic_verbosity check to print_all_ICs

---
 arch/x86/kernel/apic/io_apic.c |   42 ++++++++++++++++++++++++++---------------
 1 file changed, 27 insertions(+), 15 deletions(-)
arch/x86/kernel/apic/io_apic.c +27 -15
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
@@ -1599,9 +1599,6 @@ __apicdebuginit(void) print_IO_APIC(void
 	struct irq_desc *desc;
 	unsigned int irq;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (i = 0; i < nr_ioapics; i++)
 		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
@@ -1708,9 +1705,6 @@ __apicdebuginit(void) print_APIC_field(i
 {
 	int i;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG);
 
 	for (i = 0; i < 8; i++)
@@ -1724,9 +1718,6 @@ __apicdebuginit(void) print_local_APIC(v
 	unsigned int i, v, ver, maxlvt;
 	u64 icr;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
@@ -1824,13 +1815,17 @@ __apicdebuginit(void) print_local_APIC(v
 	printk("\n");
 }
 
-__apicdebuginit(void) print_all_local_APICs(void)
+__apicdebuginit(void) print_local_APICs(int num)
 {
 	int cpu;
 
 	preempt_disable();
-	for_each_online_cpu(cpu)
+	for_each_online_cpu(cpu) {
+		if (cpu >= num)
+			break;
+
 		smp_call_function_single(cpu, print_local_APIC, NULL, 1);
+	}
 	preempt_enable();
 }
 
@@ -1839,7 +1834,7 @@ __apicdebuginit(void) print_PIC(void)
 	unsigned int v;
 	unsigned long flags;
 
-	if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs)
+	if (!nr_legacy_irqs)
 		return;
 
 	printk(KERN_DEBUG "\nprinting PIC contents\n");
@@ -1866,21 +1861,38 @@ __apicdebuginit(void) print_PIC(void)
 	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
 }
 
-__apicdebuginit(int) print_all_ICs(void)
+static int __initdata show_lapic = 1;
+static __init int setup_show_lapic(char *arg)
+{
+	int num;
+
+	get_option(&arg, &num);
+
+	if (num >= 0)
+		show_lapic = num;
+
+	return 1;
+}
+__setup("show_lapic=", setup_show_lapic);
+
+__apicdebuginit(int) print_ICs(void)
 {
+	if (apic_verbosity == APIC_QUIET)
+		return 0;
+
 	print_PIC();
 
 	/* don't print out if apic is not there */
 	if (!cpu_has_apic && !apic_from_smp_config())
 		return 0;
 
-	print_all_local_APICs();
+	print_local_APICs(show_lapic);
 	print_IO_APIC();
 
 	return 0;
 }
 
-fs_initcall(print_all_ICs);
+fs_initcall(print_ICs);
 
 
 /* Where if anywhere is the i8259 connect in external int mode */
#1 lore raw

[Yinghai Lu - Sun, Sep 27, 2009 at 12:01:52AM -0700]

| 
| so could use that together with apci=debug to print less cpu apic.
| 
| otherwise for system have more cpus will take a while
| 
| also move apic_verbosity check to print_all_ICs
| 
| Signed-off-by: Yinghai Lu <[email protected]>
| 
| ---
|  arch/x86/kernel/apic/io_apic.c |   42 ++++++++++++++++++++++++++---------------
|  1 file changed, 27 insertions(+), 15 deletions(-)

...

Hi Yinghai, good idea!

I've tuned your patch a bit together with changelog.

1) show_lapic=1 by default does change current kernel behaviour so it should be set to max cpu available.
2) show_lapic contains the max number of lapics being printed so we need to count them instead of plain comparation with cpu number, as a result I've changed print_local_APICs. Or you meant _exactly_ cpuid number? In meaning like show_lapic=max_cpuid. Hmm?

Someting like this perhaps?

(I keep you SOB since I've touched a few lines only)

How do you think?
---
[PATCH -tip] x86,apic: introduce show_lapic setup option

In case if a system has a large number of cpus printing apics contents may consume a long time period. So to control it we introduce "show_lapic" setup option which allow us to limit the number of APICs being dumped.

Also move apic_verbosity check up so helpers routine do not need to check it.

---
 arch/x86/kernel/apic/io_apic.c |   43 ++++++++++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 15 deletions(-)
arch/x86/kernel/apic/io_apic.c +28 -15
Index: linux-2.6.git/arch/x86/kernel/apic/io_apic.c
=====================================================================
@@ -1599,9 +1599,6 @@ __apicdebuginit(void) print_IO_APIC(void
 	struct irq_desc *desc;
 	unsigned int irq;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (i = 0; i < nr_ioapics; i++)
 		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
@@ -1708,9 +1705,6 @@ __apicdebuginit(void) print_APIC_field(i
 {
 	int i;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG);
 
 	for (i = 0; i < 8; i++)
@@ -1724,9 +1718,6 @@ __apicdebuginit(void) print_local_APIC(v
 	unsigned int i, v, ver, maxlvt;
 	u64 icr;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
@@ -1824,13 +1815,19 @@ __apicdebuginit(void) print_local_APIC(v
 	printk("\n");
 }
 
-__apicdebuginit(void) print_all_local_APICs(void)
+__apicdebuginit(void) print_local_APICs(int napics)
 {
 	int cpu;
 
+	if (!napics)
+		return;
+
 	preempt_disable();
-	for_each_online_cpu(cpu)
+	for_each_online_cpu(cpu) {
+		if (!napics--)
+			break;
 		smp_call_function_single(cpu, print_local_APIC, NULL, 1);
+	}
 	preempt_enable();
 }
 
@@ -1839,7 +1836,7 @@ __apicdebuginit(void) print_PIC(void)
 	unsigned int v;
 	unsigned long flags;
 
-	if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs)
+	if (!nr_legacy_irqs)
 		return;
 
 	printk(KERN_DEBUG "\nprinting PIC contents\n");
@@ -1866,21 +1863,37 @@ __apicdebuginit(void) print_PIC(void)
 	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
 }
 
-__apicdebuginit(int) print_all_ICs(void)
+static int __initdata show_lapic = NR_CPUS;
+static __init int setup_show_lapic(char *arg)
 {
+	int num;
+
+	get_option(&arg, &num);
+	if (num >= 0)
+		show_lapic = num;
+
+	return 1;
+}
+__setup("show_lapic=", setup_show_lapic);
+
+__apicdebuginit(int) print_ICs(void)
+{
+	if (apic_verbosity == APIC_QUIET)
+		return 0;
+
 	print_PIC();
 
 	/* don't print out if apic is not there */
 	if (!cpu_has_apic && !apic_from_smp_config())
 		return 0;
 
-	print_all_local_APICs();
+	print_local_APICs(show_lapic);
 	print_IO_APIC();
 
 	return 0;
 }
 
-fs_initcall(print_all_ICs);
+fs_initcall(print_ICs);
 
 
 /* Where if anywhere is the i8259 connect in external int mode */
author
#2 lore raw
Quoted 13 lines · Cyrill Gorcunov

[Yinghai Lu - Sun, Sep 27, 2009 at 12:01:52AM -0700]

| 
| so could use that together with apci=debug to print less cpu apic.
| 
| otherwise for system have more cpus will take a while
| 
| also move apic_verbosity check to print_all_ICs
| 
| Signed-off-by: Yinghai Lu <[email protected]>
| 
| ---
|  arch/x86/kernel/apic/io_apic.c |   42 ++++++++++++++++++++++++++---------------
|  1 file changed, 27 insertions(+), 15 deletions(-)
Quoted 8 lines

...

Hi Yinghai, good idea!

I've tuned your patch a bit together with changelog.

1) show_lapic=1 by default does change current kernel behaviour so it should be set to max cpu available.

think about system with lots of cpu. but i still want to use apic=debug

Quoted 6 lines

2) show_lapic contains the max number of lapics being printed so we need to count them instead of plain comparation with cpu number, as a result I've changed print_local_APICs. Or you meant _exactly_ cpuid number? In meaning like show_lapic=max_cpuid. Hmm?

your change anything about that. there is not gap between cpu id.

YH

#3 lore raw

[Yinghai Lu - Sun, Sep 27, 2009 at 01:29:22AM -0700]

| Cyrill Gorcunov wrote:
| > [Yinghai Lu - Sun, Sep 27, 2009 at 12:01:52AM -0700]
| > | 
| > | so could use that together with apci=debug to print less cpu apic.
| > | 
| > | otherwise for system have more cpus will take a while
| > | 
| > | also move apic_verbosity check to print_all_ICs
| > | 
| > | Signed-off-by: Yinghai Lu <[email protected]>
| > | 
| > | ---
| > |  arch/x86/kernel/apic/io_apic.c |   42 ++++++++++++++++++++++++++---------------
| > |  1 file changed, 27 insertions(+), 15 deletions(-)
| > ...
| > 
| > Hi Yinghai, good idea!
| > 
| > I've tuned your patch a bit together with changelog.
| > 
| > 1) show_lapic=1 by default does change current kernel behaviour
| >    so it should be set to max cpu available.
| 
| think about system with lots of cpu. but i still want to use apic=debug

but you should not change current behaviour. starting with this change I'll get only first apic dump, so if I don;t know how many apics I have what the number I should pass? Does it mean I would need to pass say show_lapic=2, or 4, or 6 or whatever _all-the-time_ to be sure my Core2Duo prints all lapics?

| 
| > 2) show_lapic contains the max number of lapics being printed
| >    so we need to count them instead of plain comparation with
| >    cpu number, as a result I've changed print_local_APICs. Or
| >    you meant _exactly_ cpuid number? In meaning like
| >    show_lapic=max_cpuid. Hmm?
| > 
| your change anything about that. there is not gap between cpu id.

you walk with for_each_online_cpu with is not the same as for_each_present_cpu. yes, at this stage we hardly get the situation when cpu initialized and then suddenly get offline status but anyway

| 
| YH
| 

-- Cyrill

#4 lore raw

[Cyrill Gorcunov - Sun, Sep 27, 2009 at 12:54:06PM +0400]

| [Yinghai Lu - Sun, Sep 27, 2009 at 01:29:22AM -0700]
| | Cyrill Gorcunov wrote:
| | > [Yinghai Lu - Sun, Sep 27, 2009 at 12:01:52AM -0700]
| | > | 
| | > | so could use that together with apci=debug to print less cpu apic.
| | > | 
| | > | otherwise for system have more cpus will take a while
| | > | 
| | > | also move apic_verbosity check to print_all_ICs
| | > | 
| | > | Signed-off-by: Yinghai Lu <[email protected]>
| | > | 
| | > | ---
| | > |  arch/x86/kernel/apic/io_apic.c |   42 ++++++++++++++++++++++++++---------------
| | > |  1 file changed, 27 insertions(+), 15 deletions(-)
| | > ...
| | > 
| | > Hi Yinghai, good idea!
| | > 
| | > I've tuned your patch a bit together with changelog.
| | > 
| | > 1) show_lapic=1 by default does change current kernel behaviour
| | >    so it should be set to max cpu available.
| | 
| | think about system with lots of cpu. but i still want to use apic=debug
| 
| but you should not change current behaviour. starting with this change
| I'll get only first apic dump, so if I don;t know how many apics I have
| what the number I should pass? Does it mean I would need to
| pass say show_lapic=2, or 4, or 6 or whatever  _all-the-time_ to be sure
| my Core2Duo prints all lapics?
| 
| | 
| | > 2) show_lapic contains the max number of lapics being printed
| | >    so we need to count them instead of plain comparation with
| | >    cpu number, as a result I've changed print_local_APICs. Or
| | >    you meant _exactly_ cpuid number? In meaning like
| | >    show_lapic=max_cpuid. Hmm?
| | > 
| | your change anything about that. there is not gap between cpu id.
| 
| you walk with for_each_online_cpu with is not the same
| as for_each_present_cpu. yes, at this stage we hardly get
| the situation when cpu initialized and then suddenly get
| offline status but anyway
| 
| | 
| | YH
| | 
| 	-- Cyrill

Also and your and my "update" (that named :-) missed the fact that get_option may return without set argument at all, so num should be explicitly initialized as well (in setup_show_lapic).

-- Cyrill

#5 lore raw

[Cyrill Gorcunov - Sun, Sep 27, 2009 at 02:28:05PM +0400]

| [Cyrill Gorcunov - Sun, Sep 27, 2009 at 12:54:06PM +0400]
| | [Yinghai Lu - Sun, Sep 27, 2009 at 01:29:22AM -0700]
| | | Cyrill Gorcunov wrote:
| | | > [Yinghai Lu - Sun, Sep 27, 2009 at 12:01:52AM -0700]
| | | > | 
| | | > | so could use that together with apci=debug to print less cpu apic.
| | | > | 
| | | > | otherwise for system have more cpus will take a while
| | | > | 
| | | > | also move apic_verbosity check to print_all_ICs
| | | > | 
| | | > | Signed-off-by: Yinghai Lu <[email protected]>
| | | > | 
| | | > | ---
| | | > |  arch/x86/kernel/apic/io_apic.c |   42 ++++++++++++++++++++++++++---------------
| | | > |  1 file changed, 27 insertions(+), 15 deletions(-)
| | | > ...
| | | > 
| | | > Hi Yinghai, good idea!
| | | > 
| | | > I've tuned your patch a bit together with changelog.
| | | > 
| | | > 1) show_lapic=1 by default does change current kernel behaviour
| | | >    so it should be set to max cpu available.
| | | 
| | | think about system with lots of cpu. but i still want to use apic=debug
| | 
| | but you should not change current behaviour. starting with this change
| | I'll get only first apic dump, so if I don;t know how many apics I have
| | what the number I should pass? Does it mean I would need to
| | pass say show_lapic=2, or 4, or 6 or whatever  _all-the-time_ to be sure
| | my Core2Duo prints all lapics?
| | 
| | | 
| | | > 2) show_lapic contains the max number of lapics being printed
| | | >    so we need to count them instead of plain comparation with
| | | >    cpu number, as a result I've changed print_local_APICs. Or
| | | >    you meant _exactly_ cpuid number? In meaning like
| | | >    show_lapic=max_cpuid. Hmm?
| | | > 
| | | your change anything about that. there is not gap between cpu id.
| | 
| | you walk with for_each_online_cpu with is not the same
| | as for_each_present_cpu. yes, at this stage we hardly get
| | the situation when cpu initialized and then suddenly get
| | offline status but anyway
| | 
| | | 
| | | YH
| | | 
| | 	-- Cyrill
| 
| Also and your and my "update" (that named :-) missed the fact that get_option
| may return without set argument at all, so num should be explicitly
| initialized as well (in setup_show_lapic).
| 
| 	-- Cyrill

Yinghai, I've updated it to fix this nit. Convinced on for_each_online_cpu, since it's early stage indeed. But for show_lapic=1 by default -- this is plainly *wrong*. Now I put apic=debug and see only one apic dump regardless how many apics I have, so we should place limit explicitly.

So here is an updated version. I don't know what is the best way would be to say that initial patch was yours and the idea as well.

If you *agreed* on this patch -- you may either SOB it, Ack it, or take it without my SOB at all (ie do anything you like) -- I don't care much :)

-- Cyrill
---
[PATCH -tip] x86,apic: introduce show_lapic setup option

In case if a system has a large number of cpus printing apics contents may consume a long time period. So to control it we introduce "show_lapic" setup option which allow us to limit the number of APICs being dumped.

Example: apic=debug show_lapic=5

Also lift apic_verbosity checking upper that way so helper routines do not need to inspect it at all.

---
 arch/x86/kernel/apic/io_apic.c |   43 ++++++++++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 15 deletions(-)
arch/x86/kernel/apic/io_apic.c +28 -15
Index: linux-2.6.git/arch/x86/kernel/apic/io_apic.c
=====================================================================
@@ -1599,9 +1599,6 @@ __apicdebuginit(void) print_IO_APIC(void
 	struct irq_desc *desc;
 	unsigned int irq;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (i = 0; i < nr_ioapics; i++)
 		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
@@ -1708,9 +1705,6 @@ __apicdebuginit(void) print_APIC_field(i
 {
 	int i;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG);
 
 	for (i = 0; i < 8; i++)
@@ -1724,9 +1718,6 @@ __apicdebuginit(void) print_local_APIC(v
 	unsigned int i, v, ver, maxlvt;
 	u64 icr;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
@@ -1824,13 +1815,19 @@ __apicdebuginit(void) print_local_APIC(v
 	printk("\n");
 }
 
-__apicdebuginit(void) print_all_local_APICs(void)
+__apicdebuginit(void) print_local_APICs(int maxcpu)
 {
 	int cpu;
 
+	if (!maxcpu)
+		return;
+
 	preempt_disable();
-	for_each_online_cpu(cpu)
+	for_each_online_cpu(cpu) {
+		if (cpu >= maxcpu)
+			break;
 		smp_call_function_single(cpu, print_local_APIC, NULL, 1);
+	}
 	preempt_enable();
 }
 
@@ -1839,7 +1836,7 @@ __apicdebuginit(void) print_PIC(void)
 	unsigned int v;
 	unsigned long flags;
 
-	if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs)
+	if (!nr_legacy_irqs)
 		return;
 
 	printk(KERN_DEBUG "\nprinting PIC contents\n");
@@ -1866,21 +1863,37 @@ __apicdebuginit(void) print_PIC(void)
 	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
 }
 
-__apicdebuginit(int) print_all_ICs(void)
+static int __initdata show_lapic = NR_CPUS;
+static __init int setup_show_lapic(char *arg)
 {
+	int num = 0;
+
+	get_option(&arg, &num);
+	if (num >= 0)
+		show_lapic = num;
+
+	return 1;
+}
+__setup("show_lapic=", setup_show_lapic);
+
+__apicdebuginit(int) print_ICs(void)
+{
+	if (apic_verbosity == APIC_QUIET)
+		return 0;
+
 	print_PIC();
 
 	/* don't print out if apic is not there */
 	if (!cpu_has_apic && !apic_from_smp_config())
 		return 0;
 
-	print_all_local_APICs();
+	print_local_APICs(show_lapic);
 	print_IO_APIC();
 
 	return 0;
 }
 
-fs_initcall(print_all_ICs);
+fs_initcall(print_ICs);
 
 
 /* Where if anywhere is the i8259 connect in external int mode */
#6 lore raw

[Cyrill Gorcunov - Sun, Sep 27, 2009 at 06:40:08PM +0400]
...

| @@ -1866,21 +1863,37 @@ __apicdebuginit(void) print_PIC(void)
|  	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
|  }
|  
| -__apicdebuginit(int) print_all_ICs(void)
| +static int __initdata show_lapic = NR_CPUS;
| +static __init int setup_show_lapic(char *arg)
|  {
| +	int num = 0;
| +
| +	get_option(&arg, &num);
| +	if (num >= 0)
| +		show_lapic = num;
| +
| +	return 1;
| +}
| +__setup("show_lapic=", setup_show_lapic);
| +

...

Sigh... this is wrong as well. The proper initial value should be -1 :(

-- Cyrill

#7 lore raw

Yinghai, if you still need show_lapic=1 by default the acceptable solution (I guess) could be that we accept show_lapic=all as well. So a user may safely put it without knowing how many apics he has.

Does it look acceptable for you? Something like (tested) below. Also I think maybe we should better extend apic= option itself instead of intruducing new one?

Anyway, what you think? (again, if you like this patch -- SOB it, Ack it, or whatever you want).
---
[PATCH -tip] x86,apic: limit apic dumping, introduce show_lapic setup option

In case if a system has a large number of cpus printing apics contents may consume a long time period.

We limit such an output by 1 apic by default. But to have an ability to see all apics or some part of them we introduce "show_lapic" setup option which allow us to limit/unlimit the number of APICs being dumped.

Example: apic=debug show_lapic=5, or apic=debug show_lapic=all

Also move apic_verbosity checking upper that way so helper routines do not need to inspect it at all.

---
 arch/x86/kernel/apic/io_apic.c |   47 +++++++++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 15 deletions(-)
arch/x86/kernel/apic/io_apic.c +32 -15
Index: linux-2.6.git/arch/x86/kernel/apic/io_apic.c
=====================================================================
@@ -1599,9 +1599,6 @@ __apicdebuginit(void) print_IO_APIC(void
 	struct irq_desc *desc;
 	unsigned int irq;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (i = 0; i < nr_ioapics; i++)
 		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
@@ -1708,9 +1705,6 @@ __apicdebuginit(void) print_APIC_field(i
 {
 	int i;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG);
 
 	for (i = 0; i < 8; i++)
@@ -1724,9 +1718,6 @@ __apicdebuginit(void) print_local_APIC(v
 	unsigned int i, v, ver, maxlvt;
 	u64 icr;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
@@ -1824,13 +1815,19 @@ __apicdebuginit(void) print_local_APIC(v
 	printk("\n");
 }
 
-__apicdebuginit(void) print_all_local_APICs(void)
+__apicdebuginit(void) print_local_APICs(int maxcpu)
 {
 	int cpu;
 
+	if (!maxcpu)
+		return;
+
 	preempt_disable();
-	for_each_online_cpu(cpu)
+	for_each_online_cpu(cpu) {
+		if (cpu >= maxcpu)
+			break;
 		smp_call_function_single(cpu, print_local_APIC, NULL, 1);
+	}
 	preempt_enable();
 }
 
@@ -1839,7 +1836,7 @@ __apicdebuginit(void) print_PIC(void)
 	unsigned int v;
 	unsigned long flags;
 
-	if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs)
+	if (!nr_legacy_irqs)
 		return;
 
 	printk(KERN_DEBUG "\nprinting PIC contents\n");
@@ -1866,21 +1863,41 @@ __apicdebuginit(void) print_PIC(void)
 	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
 }
 
-__apicdebuginit(int) print_all_ICs(void)
+static int __initdata show_lapic = 1;
+static __init int setup_show_lapic(char *arg)
+{
+	int num = -1;
+
+	if (strcmp(arg, "all") == 0) {
+		show_lapic = CONFIG_NR_CPUS;
+	} else {
+		get_option(&arg, &num);
+		if (num >= 0)
+			show_lapic = num;
+	}
+
+	return 1;
+}
+__setup("show_lapic=", setup_show_lapic);
+
+__apicdebuginit(int) print_ICs(void)
 {
+	if (apic_verbosity == APIC_QUIET)
+		return 0;
+
 	print_PIC();
 
 	/* don't print out if apic is not there */
 	if (!cpu_has_apic && !apic_from_smp_config())
 		return 0;
 
-	print_all_local_APICs();
+	print_local_APICs(show_lapic);
 	print_IO_APIC();
 
 	return 0;
 }
 
-fs_initcall(print_all_ICs);
+fs_initcall(print_ICs);
 
 
 /* Where if anywhere is the i8259 connect in external int mode */
#8 lore raw
Quoted 100 lines · Cyrill Gorcunov

Yinghai, if you still need show_lapic=1 by default the acceptable solution (I guess) could be that we accept show_lapic=all as well. So a user may safely put it without knowing how many apics he has.

Does it look acceptable for you? Something like (tested) below. Also I think maybe we should better extend apic= option itself instead of intruducing new one?

Anyway, what you think? (again, if you like this patch -- SOB it, Ack it, or whatever you want).
---
[PATCH -tip] x86,apic: limit apic dumping, introduce show_lapic setup option

In case if a system has a large number of cpus printing apics contents may consume a long time period.

We limit such an output by 1 apic by default. But to have an ability to see all apics or some part of them we introduce "show_lapic" setup option which allow us to limit/unlimit the number of APICs being dumped.

Example: apic=debug show_lapic=5, or apic=debug show_lapic=all

Also move apic_verbosity checking upper that way so helper routines do not need to inspect it at all.

---
 arch/x86/kernel/apic/io_apic.c |   47 +++++++++++++++++++++++++++--------------

 1 file changed, 32 insertions(+), 15 deletions(-)

Index: linux-2.6.git/arch/x86/kernel/apic/io_apic.c
=====================================================================

arch/x86/kernel/apic/io_apic.c +9 -12
@@ -1599,9 +1599,6 @@ __apicdebuginit(void) print_IO_APIC(void
        struct irq_desc *desc;
        unsigned int irq;
 
-       if (apic_verbosity == APIC_QUIET)
-               return;
-
        printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
        for (i = 0; i < nr_ioapics; i++)
                printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
@@ -1708,9 +1705,6 @@ __apicdebuginit(void) print_APIC_field(i
  {
        int i;
 
-       if (apic_verbosity == APIC_QUIET)
-               return;
-
        printk(KERN_DEBUG);
 
        for (i = 0; i < 8; i++)
@@ -1724,9 +1718,6 @@ __apicdebuginit(void) print_local_APIC(v
        unsigned int i, v, ver, maxlvt;
        u64 icr;
 
-       if (apic_verbosity == APIC_QUIET)
-               return;
-
        printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
                smp_processor_id(), hard_smp_processor_id());
        v = apic_read(APIC_ID);
@@ -1824,13 +1815,19 @@ __apicdebuginit(void) print_local_APIC(v
        printk("\n");
  }
 
-__apicdebuginit(void) print_all_local_APICs(void)
+__apicdebuginit(void) print_local_APICs(int maxcpu)
  {
        int cpu;
 
+       if (!maxcpu)
+               return;
+
        preempt_disable();
-       for_each_online_cpu(cpu)
+       for_each_online_cpu(cpu) {
+               if (cpu >= maxcpu)
+                       break;
                smp_call_function_single(cpu, print_local_APIC, NULL, 1);
+       }
        preempt_enable();
  }
 
@@ -1839,7 +1836,7 @@ __apicdebuginit(void) print_PIC(void)
        unsigned int v;
        unsigned long flags;
 
-       if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs)
+       if (!nr_legacy_irqs)
                return;
 
        printk(KERN_DEBUG "\nprinting PIC contents\n");
@@ -1866,21 +1863,41 @@ __apicdebuginit(void) print_PIC(void)
        printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);

arch/x86/kernel/apic/io_apic.c __apicdebuginit(void) print_PIC(void) · line 1872

Quoted 10 lines
arch/x86/kernel/apic/io_apic.c +7 -1
  }
 
-__apicdebuginit(int) print_all_ICs(void)
+static int __initdata show_lapic = 1;
+static __init int setup_show_lapic(char *arg)
+{
+       int num = -1;
+
+       if (strcmp(arg, "all") == 0) {
+               show_lapic = CONFIG_NR_CPUS;

NR_CPUS or nr_cpu_ids?

YH

#9 lore raw

[Yinghai Lu - Mon, Sep 28, 2009 at 10:46:54AM -0700]
| On Mon, Sep 28, 2009 at 9:07 AM, Cyrill Gorcunov <[email protected]> wrote:
...

| >
| > -__apicdebuginit(int) print_all_ICs(void)
| > +static int __initdata show_lapic = 1;
| > +static __init int setup_show_lapic(char *arg)
| > +{
| > +       int num = -1;
| > +
| > +       if (strcmp(arg, "all") == 0) {
| > +               show_lapic = CONFIG_NR_CPUS;
| 
| NR_CPUS or nr_cpu_ids?

NR_CPUS as far as I can tell -- maximal to not exit for() loop until end. nr_cpu_ids safe here as well, but constant is better :)

| 
| YH
| 

-- Cyrill

#10 lore raw

[Cyrill Gorcunov - Mon, Sep 28, 2009 at 10:02:01PM +0400]

| [Yinghai Lu - Mon, Sep 28, 2009 at 10:46:54AM -0700]
| | On Mon, Sep 28, 2009 at 9:07 AM, Cyrill Gorcunov <[email protected]> wrote:
| ...
| | >
| | > -__apicdebuginit(int) print_all_ICs(void)
| | > +static int __initdata show_lapic = 1;
| | > +static __init int setup_show_lapic(char *arg)
| | > +{
| | > +       int num = -1;
| | > +
| | > +       if (strcmp(arg, "all") == 0) {
| | > +               show_lapic = CONFIG_NR_CPUS;
| | 
| | NR_CPUS or nr_cpu_ids?
| 
| NR_CPUS as far as I can tell -- maximal to not exit for() loop until end.
| nr_cpu_ids safe here as well, but constant is better :)
| 
| | 
| | YH
| | 
| 	-- Cyrill

Yinghai, any news here? I would like to know your conclusion on this patch.

-- Cyrill