mpc512x. Micron nand flash needs a reset before a read command is issued.
Subsystems (2)
PATCH 1/1 mpc512x. Micron nand flash needs a reset before a read command is issued.
Micron nand flash needs a reset before a read command is issued. The current mpc5121_nfc driver ignores the reset command.
--- drivers/mtd/nand/mpc5121_nfc.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/mtd/nand/mpc5121_nfc.c +0 -0
@@ -334,6 +334,7 @@ static void mpc5121_nfc_command(struct mtd_info
*mtd, unsigned command,
case NAND_CMD_ERASE2:
case NAND_CMD_READID:
case NAND_CMD_STATUS:
+ case NAND_CMD_RESET:
break;
default:
Signature · 1 line
1.6.0.4
Wolfgang Denk
AppliedPATCH 1/1 mpc512x. Micron nand flash needs a reset before a read command is issued.
Dear Paul Gibson,
Quoted 6 lines · In message <[email protected]> you…
Micron nand flash needs a reset before a read command is issued. The current
mpc5121_nfcdriver ignores the reset command.--- drivers/mtd/nand/mpc5121_nfc.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
Applied, after fixing the line wrapping added by your mailer.
Please use "git send-email" to submit patches, which avoid this (and other) problem(s).
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Hegel was right when he said that we learn from history that man can never learn anything from history. - George Bernard Shaw
PATCH 1/1 mpc512x. Micron nand flash needs a reset before a read command is issued.
Quoted 11 lines · Wolfgang Denk
Dear Paul Gibson,
Quoted 6 lines · In message <[email protected]> you…
Micron nand flash needs a reset before a read command is issued. The current
mpc5121_nfcdriver ignores the reset command.--- drivers/mtd/nand/mpc5121_nfc.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)Applied, after fixing the line wrapping added by your mailer.
I had already added it to u-boot-nand-flash.git...
-Scott
PATCH 1/1 mpc512x. Micron nand flash needs a reset before a read command is issued.
Dear Scott Wood,
Quoted 4 lines · In message <[email protected]> you wrote:
Quoted 2 lines
Applied, after fixing the line wrapping added by your mailer.
I had already added it to u-boot-nand-flash.git...
Ah, thanks. Didn't realize this, sorry. Should be no isse, though.
Best regards,
Wolfgang Denk
Signature · 8 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
When dreams become more important than reality, you give up travel,
building, creating; you even forget how to repair the machines left
behind by your ancestors. You just sit living and reliving other
lives left behind in the thought records.
-- Vina, "The Menagerie" ("The Cage"), stardate unknown