linux-next: Tree for October 7
Subsystems (6)
Hi all,
Changes since 20091006:
Trees removed: thumb-2 and kmemleak (at the maintiners request)
Trees added: catalin (replacing the 2 above)
tmio-mmc
alacrity
My fixes tree contains a build fix for powerpc/kvm.
The pci tree gained a build failure so I used the version from next-20091006.
The wireless tree lost its build failure.
The block tree regained its build failure so I used the version from next-20091006 (and the same for the device-mapper tree which depends on the block tree).
The mfd tree still has a build failure so I used the version from next-20091005.
The suspend tree still has a build failure so I used the version from next-20091002.
----------------------------------------------------------------------------
I have created today's linux-next tree atgit://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(patches at http://www.kernel.org/pub/linux/kernel/v2.6/next/ ). If you are tracking the linux-next tree using git, you should not use "git pull" to do so as that will try to merge the new linux-next release with the old one. You should use "git fetch" as mentioned in the FAQ on the wiki (see below).
You can see which trees have been included by looking in the Next/Trees file in the source. There are also quilt-import.log and merge.log files in the Next directory. Between each merge, the tree was built with a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the final fixups (if any), it is also built with powerpc allnoconfig (32 and 64 bit), ppc44x_defconfig and allyesconfig (minus CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc and sparc64 defconfig. These builds also have CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and CONFIG_DEBUG_INFO disabled when necessary.
Below is a summary of the state of the merge.
We are up to 140 trees (counting Linus' and 21 trees of patches pending for Linus' tree), more are welcome (even if they are currently empty). Thanks to those who have contributed, and to those who haven't, please do.
Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next . If maintainers want to give advice about cross compilers/configs that work, we are always open to add more builds.
Thanks to Jan Dittmer for adding the linux-next tree to his build tests at http://l4x.org/k/ , the guys at http://test.kernel.org/ and Randy Dunlap for doing many randconfig builds.
There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.
Signature · 179 lines
Cheers, Stephen Rothwell [email protected] $ git checkout master $ git reset --hard stable Merging origin/master Merging fixes/fixes Merging arm-current/master Merging m68k-current/for-linus Merging powerpc-merge/merge Merging sparc-current/master Merging scsi-rc-fixes/master Merging net-current/master Merging sound-current/for-linus Merging pci-current/for-linus Merging wireless-current/master Merging kbuild-current/master Merging quilt/driver-core.current Merging quilt/tty.current Merging quilt/usb.current Merging cpufreq-current/fixes Merging input-current/for-linus Merging md-current/for-linus Merging audit-current/for-linus Merging crypto-current/master Merging ide-curent/master Merging dwmw2/master Merging arm/devel Merging davinci/for-next Merging pxa/for-next Merging avr32/avr32-arch Merging blackfin/for-linus Merging cris/for-next Merging ia64/test Merging m68k/for-next CONFLICT (content): Merge conflict in drivers/rtc/Kconfig Merging m68knommu/for-next Merging microblaze/next Merging mips/mips-for-linux-next CONFLICT (content): Merge conflict in arch/mips/Kconfig CONFLICT (add/add): Merge conflict in arch/mips/bcm63xx/Makefile CONFLICT (add/add): Merge conflict in arch/mips/bcm63xx/boards/board_bcm963xx.c CONFLICT (delete/modify): arch/mips/lemote/lm2e/Makefile deleted in HEAD and modified in mips/mips-for-linux-next. Version mips/mips-for-linux-next of arch/mips/lemote/lm2e/Makefile left in tree. CONFLICT (delete/modify): arch/mips/lemote/lm2e/pci.c deleted in HEAD and modified in mips/mips-for-linux-next. Version mips/mips-for-linux-next of arch/mips/lemote/lm2e/pci.c left in tree. CONFLICT (delete/modify): arch/mips/lemote/lm2e/prom.c deleted in HEAD and modified in mips/mips-for-linux-next. Version mips/mips-for-linux-next of arch/mips/lemote/lm2e/prom.c left in tree. $ git rm -f arch/mips/lemote/lm2e/Makefile arch/mips/lemote/lm2e/pci.c arch/mips/lemote/lm2e/prom.c Merging parisc/next CONFLICT (content): Merge conflict in arch/parisc/include/asm/thread_info.h CONFLICT (content): Merge conflict in arch/parisc/kernel/entry.S CONFLICT (content): Merge conflict in arch/parisc/kernel/signal.c Merging powerpc/next Merging 4xx/next Merging galak/next Merging s390/features Merging sh/master Merging sparc/master Merging xtensa/master Merging cifs/master Merging configfs/linux-next Merging ecryptfs/next Merging ext3/for_next Merging ext4/next Merging fatfs/master Merging fuse/for-next Merging gfs2/master Merging jfs/next Merging nfs/linux-next Merging nfsd/nfsd-next Merging nilfs2/for-next Merging ocfs2/linux-next Merging squashfs/master Merging udf/for_next Merging v9fs/for-next Merging ubifs/linux-next Merging xfs/master Merging vfs/for-next Merging pci/linux-next $ git reset --hard HEAD^ Merging refs/next/20091006/pci Merging hid/for-next Merging quilt/i2c Merging quilt/jdelvare-hwmon Merging quilt/kernel-doc Merging v4l-dvb/master Merging quota/for_next Merging kbuild/master Merging kconfig/for-next Merging ide/master Merging libata/NEXT Merging infiniband/for-next Merging acpi/test Merging ieee1394/for-next Merging ubi/linux-next Merging kvm/linux-next Merging dlm/next Merging scsi/master Merging async_tx/next Merging net/master Merging wireless/master Merging mtd/master Merging crypto/master Merging sound/for-next Merging cpufreq/next Merging quilt/rr Merging mmc/next Merging tmio-mmc/linux-next Merging input/next Merging lsm/for-next Merging block/for-next $ git reset --hard HEAD^ Merging refs/next/20091006/block Merging quilt/device-mapper $ git reset --hard HEAD^ Merging refs/next/20091006/device-mapper Merging embedded/master Merging firmware/master Merging pcmcia/master Merging battery/master Merging leds/for-mm Merging backlight/for-mm Merging kgdb/kgdb-next Merging slab/for-next Merging uclinux/for-next Merging md/for-next Merging mfd/for-next $ git reset --hard HEAD^ Merging refs/next/20091005/mfd Merging hdlc/hdlc-next Merging drm/drm-next CONFLICT (content): Merge conflict in drivers/gpu/drm/radeon/radeon.h CONFLICT (content): Merge conflict in drivers/gpu/drm/radeon/radeon_asic.h CONFLICT (content): Merge conflict in drivers/gpu/drm/radeon/radeon_device.c Merging voltage/for-next Merging security-testing/next Merging lblnet/master Merging agp/agp-next Merging uwb/for-upstream Merging watchdog/master Merging bdev/master Merging dwmw2-iommu/master Merging cputime/cputime Merging osd/linux-next Merging jc_docs/docs-next Merging nommu/master Merging trivial/for-next Merging audit/for-next Merging omap/for-next Merging quilt/aoe Merging suspend/linux-next $ git reset --hard HEAD^ Merging refs/next/20091002/suspend Merging bluetooth/master Merging fsnotify/for-next Merging irda/for-next Merging hwlat/for-linus Merging drbd/for-jens CONFLICT (add/add): Merge conflict in drivers/block/drbd/Kconfig CONFLICT (add/add): Merge conflict in drivers/block/drbd/Makefile CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_actlog.c CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_int.h CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_main.c CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_nl.c CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_receiver.c CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_req.c CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_worker.c Merging catalin/for-next Merging alacrity/linux-next CONFLICT (content): Merge conflict in lib/Kconfig Merging tip/auto-latest Merging oprofile/for-next Merging percpu/for-next Merging sfi/sfi-test Merging asm-generic/next Merging hwpoison/hwpoison Merging quilt/driver-core Merging quilt/tty Merging quilt/usb Merging quilt/staging Merging scsi-post-merge/master
next-20091007 - comedi driver build breaks on S390x
Hi Greg,
next-20091007 randconfig build breaks on s390x with build error
drivers/staging/comedi/comedi_fops.c: In function 'comedi_mmap':drivers/staging/comedi/comedi_fops.c:1453: error: 'PAGE_SHARED' undeclared (first use in this function) drivers/staging/comedi/comedi_fops.c:1453: error: (Each undeclared identifier is reported only once drivers/staging/comedi/comedi_fops.c:1453: error: for each function it appears in.) make[3]: *** [drivers/staging/comedi/comedi_fops.o] Error 1
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.32-rc3
# Wed Oct 7 04:26:29 2009
#CONFIG_SCHED_MC=yCONFIG_MMU=yCONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_BUG=yCONFIG_NO_IOMEM=yCONFIG_NO_DMA=yCONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_S390=yCONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y
#
# General setup
#
# CONFIG_EXPERIMENTAL is not setCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_WATCH=yCONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not setCONFIG_RCU_FANOUT=32CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=17CONFIG_CGROUPS=yCONFIG_CGROUP_DEBUG=yCONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not setCONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not setCONFIG_RELAY=y
# CONFIG_NAMESPACES is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not setCONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_EMBEDDED=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=y
# CONFIG_EPOLL is not setCONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not setCONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
# CONFIG_AIO is not setCONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLQB is not set
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_OPROFILE=mCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_SYSCALL_WRAPPERS=yCONFIG_KRETPROBES=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_USE_GENERIC_SMP_HELPERS=yCONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y
#
# GCOV-based kernel profiling
#CONFIG_GCOV_KERNEL=yCONFIG_GCOV_PROFILE_ALL=yCONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=yCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_INIT_ALL_POSSIBLE=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=y
# CONFIG_LBDAF is not setCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_INTEGRITY=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_DEADLINE=mCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_FREEZER is not set
#
# Base setup
#
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not setCONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_64BIT is not setCONFIG_32BIT=yCONFIG_KTIME_SCALAR=yCONFIG_SMP=yCONFIG_NR_CPUS=32CONFIG_HOTPLUG_CPU=yCONFIG_AUDIT_ARCH=yCONFIG_S390_SWITCH_AMODE=yCONFIG_S390_EXEC_PROTECT=y
#
# Code generation options
#
# CONFIG_MARCH_G5 is not setCONFIG_MARCH_Z900=y
# CONFIG_MARCH_Z990 is not set
# CONFIG_MARCH_Z9_109 is not set
# CONFIG_MARCH_Z10 is not setCONFIG_PACK_STACK=yCONFIG_CHECK_STACK=yCONFIG_STACK_GUARD=256CONFIG_WARN_STACK=yCONFIG_WARN_STACK_SIZE=2048CONFIG_ARCH_POPULATES_NODE_MAP=y
#
# Kernel preemption
#
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=yCONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_STATIC=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=yCONFIG_MEMORY_HOTPLUG=yCONFIG_MEMORY_HOTPLUG_SPARSE=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not setCONFIG_ZONE_DMA_FLAG=0CONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=yCONFIG_HAVE_MLOCKED_PAGE_BIT=yCONFIG_MMU_NOTIFIER=yCONFIG_KSM=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# I/O subsystem configuration
#CONFIG_QDIO=yCONFIG_CHSC_SCH=m
#
# Misc
#CONFIG_IPL=yCONFIG_IPL_TAPE=y
# CONFIG_IPL_VM is not set
# CONFIG_BINFMT_ELF is not set
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=mCONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PROCESS_DEBUG is not setCONFIG_PFAULT=yCONFIG_SHARED_KERNEL=yCONFIG_CMM=yCONFIG_CMM_PROC=y
# CONFIG_APPLDATA_BASE is not set
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_S390_HYPFS_FS is not setCONFIG_KEXEC=yCONFIG_ZFCPDUMP=yCONFIG_SECCOMP=y
#
# Power Management
#CONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_RUNTIME=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
# CONFIG_UNIX is not setCONFIG_XFRM=yCONFIG_XFRM_USER=yCONFIG_XFRM_IPCOMP=mCONFIG_NET_KEY=mCONFIG_IUCV=yCONFIG_AFIUCV=mCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not setCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=yCONFIG_NET_IPGRE=yCONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not setCONFIG_ARPD=yCONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not setCONFIG_INET_TUNNEL=yCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not setCONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=y
# CONFIG_DEFAULT_BIC is not setCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not setCONFIG_INET6_IPCOMP=mCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_INET6_XFRM_MODE_TRANSPORT=m
# CONFIG_INET6_XFRM_MODE_TUNNEL is not setCONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_IPV6_SIT is not setCONFIG_IPV6_TUNNEL=mCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=yCONFIG_NETFILTER_DEBUG=yCONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=yCONFIG_NETFILTER_NETLINK_QUEUE=yCONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not setCONFIG_NETFILTER_XTABLES=yCONFIG_NETFILTER_XT_TARGET_CLASSIFY=mCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_HL=mCONFIG_NETFILTER_XT_TARGET_MARK=y
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not setCONFIG_NETFILTER_XT_TARGET_NFQUEUE=mCONFIG_NETFILTER_XT_TARGET_RATEEST=yCONFIG_NETFILTER_XT_TARGET_TRACE=mCONFIG_NETFILTER_XT_TARGET_SECMARK=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not setCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ESP=y
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not setCONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not setCONFIG_NETFILTER_XT_MATCH_LENGTH=yCONFIG_NETFILTER_XT_MATCH_LIMIT=y
# CONFIG_NETFILTER_XT_MATCH_MAC is not setCONFIG_NETFILTER_XT_MATCH_MARK=yCONFIG_NETFILTER_XT_MATCH_MULTIPORT=yCONFIG_NETFILTER_XT_MATCH_OWNER=yCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not setCONFIG_NETFILTER_XT_MATCH_RATEEST=yCONFIG_NETFILTER_XT_MATCH_REALM=yCONFIG_NETFILTER_XT_MATCH_RECENT=mCONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not setCONFIG_NETFILTER_XT_MATCH_STRING=y
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not setCONFIG_NETFILTER_XT_MATCH_U32=yCONFIG_NETFILTER_XT_MATCH_OSF=mCONFIG_IP_VS=mCONFIG_IP_VS_DEBUG=yCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=m
# CONFIG_IP_VS_LBLCR is not setCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=m
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set
#
# IPVS application helper
#CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not setCONFIG_IP_NF_QUEUE=y
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#CONFIG_IP6_NF_QUEUE=mCONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not setCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_MATCH_FRAG=m
# CONFIG_IP6_NF_MATCH_OPTS is not setCONFIG_IP6_NF_MATCH_HL=m
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not setCONFIG_IP6_NF_MATCH_MH=m
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_TARGET_HL is not setCONFIG_IP6_NF_TARGET_LOG=mCONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not setCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_RAW=m
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not setCONFIG_LLC=mCONFIG_LLC2=mCONFIG_IPX=mCONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
# CONFIG_PHONET is not setCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not setCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_MULTIQ=mCONFIG_NET_SCH_RED=m
# CONFIG_NET_SCH_SFQ is not setCONFIG_NET_SCH_TEQL=yCONFIG_NET_SCH_TBF=yCONFIG_NET_SCH_GRED=y
# CONFIG_NET_SCH_DSMARK is not setCONFIG_NET_SCH_NETEM=yCONFIG_NET_SCH_DRR=mCONFIG_NET_SCH_INGRESS=y
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=yCONFIG_NET_CLS_TCINDEX=m
# CONFIG_NET_CLS_ROUTE4 is not setCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=yCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=y
# CONFIG_CLS_U32_MARK is not setCONFIG_NET_CLS_RSVP=y
# CONFIG_NET_CLS_RSVP6 is not setCONFIG_NET_CLS_FLOW=y
# CONFIG_NET_CLS_CGROUP is not setCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=yCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=y
# CONFIG_NET_EMATCH_META is not setCONFIG_NET_EMATCH_TEXT=mCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=mCONFIG_NET_ACT_GACT=m
# CONFIG_GACT_PROB is not set
# CONFIG_NET_ACT_MIRRED is not setCONFIG_NET_ACT_NAT=yCONFIG_NET_ACT_PEDIT=mCONFIG_NET_ACT_SIMP=m
# CONFIG_NET_ACT_SKBEDIT is not setCONFIG_NET_CLS_IND=yCONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_CAN=mCONFIG_CAN_RAW=m
# CONFIG_CAN_BCM is not set
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=mCONFIG_CAN_DEV=m
# CONFIG_CAN_CALC_BITTIMING is not set
# CONFIG_CAN_DEBUG_DEVICES is not setCONFIG_WIMAX=mCONFIG_WIMAX_DEBUG_LEVEL=8CONFIG_RFKILL=m
# CONFIG_PCMCIA is not setCONFIG_CCW=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not setCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not setCONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=mCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected #CONFIG_BLK_DEV_DRBD=mCONFIG_DRBD_FAULT_INJECTION=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set CONFIG_CDROM_PKTCDVD=yCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_ATA_OVER_ETH is not set
#
# S/390 block device drivers
#CONFIG_BLK_DEV_XPRAM=m
# CONFIG_DCSSBLK is not set
# CONFIG_DASD is not setCONFIG_MISC_DEVICES=yCONFIG_HWLAT_DETECTOR=mCONFIG_ENCLOSURE_SERVICES=m
#
# EEPROM support
#CONFIG_EEPROM_93CX6=m
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=m
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not setCONFIG_CHR_DEV_ST=mCONFIG_CHR_DEV_OSST=mCONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_ENCLOSURE=m
# CONFIG_SCSI_MULTI_LUN is not setCONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not setCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not setCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SAS_LIBSAS_DEBUG=y
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not setCONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not setCONFIG_SCSI_DH_HP_SW=mCONFIG_SCSI_DH_EMC=m
# CONFIG_SCSI_OSD_INITIATOR is not setCONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_NETDEVICES is not set
#
# Character devices
#CONFIG_DEVKMEM=y
# CONFIG_UNIX98_PTYS is not setCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_HVC_DRIVER=yCONFIG_HVC_IUCV=yCONFIG_HW_RANDOM=y
# CONFIG_R3964 is not setCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not setCONFIG_UMMUNOTIFY=m
#
# S/390 character device drivers
#
# CONFIG_TN3270 is not setCONFIG_TN3215=yCONFIG_TN3215_CONSOLE=yCONFIG_CCW_CONSOLE=yCONFIG_SCLP_TTY=yCONFIG_SCLP_CONSOLE=yCONFIG_SCLP_VT220_TTY=yCONFIG_SCLP_VT220_CONSOLE=y
# CONFIG_SCLP_CPI is not set
# CONFIG_SCLP_ASYNC is not setCONFIG_S390_TAPE=y
#
# S/390 tape interface support
#
# CONFIG_S390_TAPE_BLOCK is not set
#
# S/390 tape hardware support
#CONFIG_S390_TAPE_34XX=mCONFIG_S390_TAPE_3590=yCONFIG_VMLOGRDR=yCONFIG_VMCP=y
# CONFIG_MONREADER is not setCONFIG_MONWRITER=mCONFIG_S390_VMUR=m
#
# PPS support
#CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not setCONFIG_W1_SLAVE_DS2431=m
# CONFIG_W1_SLAVE_DS2433 is not setCONFIG_W1_SLAVE_DS2760=yCONFIG_W1_SLAVE_BQ27000=mCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=yCONFIG_BATTERY_DS2760=yCONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
# CONFIG_REGULATOR is not setCONFIG_MEMSTICK=mCONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_AUXDISPLAY is not set
#
# TI VLYNQ
#CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not setCONFIG_ECHO=yCONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
#
# Qualcomm MSM Camera And Video
#
#
# Camera Sensor Selection
#
# CONFIG_INPUT_GPIO is not setCONFIG_POHMELFS=mCONFIG_POHMELFS_DEBUG=yCONFIG_POHMELFS_CRYPTO=y
# CONFIG_PLAN9AUTH is not set
#
# RAR Register Driver
#CONFIG_RAR_REGISTER=mCONFIG_IIO=yCONFIG_IIO_RING_BUFFER=y
# CONFIG_IIO_SW_RING is not setCONFIG_IIO_TRIGGER=y
#
# Accelerometers
#
#
# Analog to digital convertors
#
#
# Light sensors
#
#
# Triggers - standalone
#CONFIG_COWLOOP=y
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not setCONFIG_EXT2_FS_XIP=yCONFIG_EXT3_FS=mCONFIG_EXT3_DEFAULTS_TO_ORDERED=yCONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not setCONFIG_EXT4_FS=mCONFIG_EXT4_FS_XATTR=yCONFIG_EXT4_FS_POSIX_ACL=yCONFIG_EXT4_FS_SECURITY=yCONFIG_EXT4_DEBUG=yCONFIG_FS_XIP=yCONFIG_JBD=mCONFIG_JBD_DEBUG=yCONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not setCONFIG_JFS_FS=mCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=yCONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_FILE_LOCKING is not setCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not setCONFIG_PRINT_QUOTA_WARNING=yCONFIG_QUOTA_TREE=yCONFIG_QFMT_V1=yCONFIG_QFMT_V2=yCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=yCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
#
# Caches
#
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=y
# CONFIG_ZISOFS is not setCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not setCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=yCONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
# CONFIG_SYSFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_MISC_FILESYSTEMS=yCONFIG_HFSPLUS_FS=m
# CONFIG_CRAMFS is not setCONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not setCONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3CONFIG_VXFS_FS=mCONFIG_MINIX_FS=yCONFIG_OMFS_FS=mCONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not setCONFIG_ROMFS_FS=mCONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not setCONFIG_ROMFS_ON_BLOCK=yCONFIG_SYSV_FS=yCONFIG_UFS_FS=yCONFIG_UFS_DEBUG=yCONFIG_NETWORK_FILESYSTEMS=yCONFIG_SMB_FS=mCONFIG_SMB_NLS_DEFAULT=yCONFIG_SMB_NLS_REMOTE="cp437"CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not setCONFIG_CIFS_DEBUG2=y
# CONFIG_CIFS_DFS_UPCALL is not setCONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not setCONFIG_NCPFS_IOCTL_LOCKING=yCONFIG_NCPFS_STRONG=yCONFIG_NCPFS_NFS_NS=y
# CONFIG_NCPFS_OS2_NS is not setCONFIG_NCPFS_SMALLDOS=yCONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_CODA_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=yCONFIG_ACORN_PARTITION_CUMANA=yCONFIG_ACORN_PARTITION_EESOX=yCONFIG_ACORN_PARTITION_ICS=yCONFIG_ACORN_PARTITION_ADFS=yCONFIG_ACORN_PARTITION_POWERTEC=yCONFIG_ACORN_PARTITION_RISCIX=yCONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_IBM_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=yCONFIG_LDM_DEBUG=yCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=yCONFIG_SYSV68_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not setCONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=mCONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not setCONFIG_NLS_CODEPAGE_857=mCONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not setCONFIG_NLS_CODEPAGE_862=yCONFIG_NLS_CODEPAGE_863=mCONFIG_NLS_CODEPAGE_864=mCONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not setCONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not setCONFIG_NLS_CODEPAGE_949=yCONFIG_NLS_CODEPAGE_874=mCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=yCONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not setCONFIG_NLS_ISO8859_7=yCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not setCONFIG_NLS_KOI8_U=yCONFIG_NLS_UTF8=m
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not setCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=yCONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not setCONFIG_DEBUG_OBJECTS=yCONFIG_DEBUG_OBJECTS_SELFTEST=y
# CONFIG_DEBUG_OBJECTS_FREE is not setCONFIG_DEBUG_OBJECTS_TIMERS=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1CONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=yCONFIG_DEBUG_LOCKDEP=yCONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not setCONFIG_DEBUG_LOCKING_API_SELFTESTS=yCONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=yCONFIG_DEBUG_VM=y
# CONFIG_DEBUG_WRITECOUNT is not setCONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not setCONFIG_DEBUG_SG=yCONFIG_DEBUG_NOTIFIERS=yCONFIG_DEBUG_CREDENTIALS=yCONFIG_FRAME_POINTER=yCONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_CPU_STALL_DETECTOR is not setCONFIG_KPROBES_SANITY_TEST=yCONFIG_BACKTRACE_SELF_TEST=m
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not setCONFIG_LKDTM=yCONFIG_FAULT_INJECTION=yCONFIG_FAILSLAB=yCONFIG_FAIL_PAGE_ALLOC=yCONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_LATENCYTOP is not setCONFIG_SYSCTL_SYSCALL_CHECK=yCONFIG_DEBUG_PAGEALLOC=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_RING_BUFFER_ALLOW_SWAP=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not setCONFIG_SCHED_TRACER=yCONFIG_FTRACE_SYSCALLS=yCONFIG_BOOT_TRACER=yCONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not setCONFIG_STACK_TRACER=yCONFIG_KMEMTRACE=yCONFIG_WORKQUEUE_TRACER=yCONFIG_DYNAMIC_FTRACE=yCONFIG_FUNCTION_PROFILER=yCONFIG_FTRACE_MCOUNT_RECORD=yCONFIG_FTRACE_SELFTEST=yCONFIG_FTRACE_STARTUP_TEST=yCONFIG_EVENT_TRACE_TEST_SYSCALLS=y
# CONFIG_RING_BUFFER_BENCHMARK is not setCONFIG_DYNAMIC_DEBUG=yCONFIG_SAMPLES=yCONFIG_SAMPLE_TRACEPOINTS=mCONFIG_SAMPLE_TRACE_EVENTS=mCONFIG_SAMPLE_KOBJECT=mCONFIG_SAMPLE_KPROBES=mCONFIG_SAMPLE_KRETPROBES=m
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITYFS=yCONFIG_SECURITY_FILE_CAPABILITIES=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not setCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=yCONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=yCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=yCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_PCBC=m
#
# Hash modes
#CONFIG_CRYPTO_HMAC=m
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not setCONFIG_CRYPTO_GHASH=yCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not setCONFIG_CRYPTO_RMD128=yCONFIG_CRYPTO_RMD160=yCONFIG_CRYPTO_RMD256=mCONFIG_CRYPTO_RMD320=y
# CONFIG_CRYPTO_SHA1 is not setCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=yCONFIG_CRYPTO_TGR192=yCONFIG_CRYPTO_WP512=y
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not setCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAST5=yCONFIG_CRYPTO_CAST6=yCONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not setCONFIG_CRYPTO_TEA=yCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_ZLIB=m
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=yCONFIG_CRYPTO_HW=yCONFIG_ZCRYPT=yCONFIG_ZCRYPT_MONOLITHIC=yCONFIG_CRYPTO_SHA1_S390=m
# CONFIG_CRYPTO_SHA256_S390 is not setCONFIG_CRYPTO_SHA512_S390=yCONFIG_CRYPTO_DES_S390=mCONFIG_CRYPTO_AES_S390=mCONFIG_S390_PRNG=mCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not setCONFIG_CRC16=mCONFIG_CRC_T10DIF=mCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=m
# CONFIG_LIBCRC32C is not setCONFIG_ZLIB_INFLATE=mCONFIG_ZLIB_DEFLATE=mCONFIG_DECOMPRESS_BZIP2=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=yCONFIG_TEXTSEARCH_BM=yCONFIG_TEXTSEARCH_FSM=yCONFIG_NLATTR=yCONFIG_LRU_CACHE=mCONFIG_SHM_SIGNAL=m
# CONFIG_IOQ is not setCONFIG_VIRTUALIZATION=y
# CONFIG_VIRTIO_BALLOON is not set
Kamalesh
Re: next-20091007 - comedi driver build breaks on S390x
Quoted 9 lines · Kamalesh Babulal
Hi Greg,
next-20091007 randconfig build breaks on s390x with build error
drivers/staging/comedi/comedi_fops.c: In function 'comedi_mmap':drivers/staging/comedi/comedi_fops.c:1453: error: 'PAGE_SHARED' undeclared (first use in this function)drivers/staging/comedi/comedi_fops.c:1453: error: (Each undeclared identifier is reported only oncedrivers/staging/comedi/comedi_fops.c:1453: error: for each function it appears in.) make[3]: *** [drivers/staging/comedi/comedi_fops.o] Error 1
Odd. What changed in the header files to cause this?
thanks,
greg k-h
Re: next-20091007 - comedi driver build breaks on S390x
Quoted 5 lines · On Wed, 7 Oct 2009 06:07:44 -0700 Greg KH <[email protected]> wrote:
Quoted 4 lines · Kamalesh Babulal
Hi Greg,
next-20091007 randconfig build breaks on s390x with build error
Quoted 7 lines
Quoted 5 lines
drivers/staging/comedi/comedi_fops.c: In function 'comedi_mmap':drivers/staging/comedi/comedi_fops.c:1453: error: 'PAGE_SHARED' undeclared (first use in this function)drivers/staging/comedi/comedi_fops.c:1453: error: (Each undeclared identifier is reported only oncedrivers/staging/comedi/comedi_fops.c:1453: error: for each function it appears in.) make[3]: *** [drivers/staging/comedi/comedi_fops.o] Error 1Odd. What changed in the header files to cause this?
The problem has always been present, only now did randconfig find it. The compile breaks because PAGE_SHARED is not defined for s390. The equivalent define for s390 is PAGE_RW. The problem has not shown up so far because all drivers who use the remap_pfn_range call with PAGE_SHARED has dependencies not available on s390, e.g. CONFIG_PCI.
To fix this I see are two options: 1) add a PAGE_SHARED define to arch/s390/include/asm/pgtable.h, 2) make comedi depend on !S390.
Signature · 4 lines
blue skies, Martin. "Reality continues to ruin my life." - Calvin.
Re: next-20091007 - comedi driver build breaks on S390x
Quoted 16 lines · Martin Schwidefsky
Quoted 5 lines · On Wed, 7 Oct 2009 06:07:44 -0700 Greg KH <[email protected]> wrote:
Quoted 4 lines · Kamalesh Babulal
Hi Greg,
next-20091007 randconfig build breaks on s390x with build errorQuoted 7 lines
Quoted 5 lines
drivers/staging/comedi/comedi_fops.c: In function 'comedi_mmap':drivers/staging/comedi/comedi_fops.c:1453: error: 'PAGE_SHARED' undeclared (first use in this function)drivers/staging/comedi/comedi_fops.c:1453: error: (Each undeclared identifier is reported only oncedrivers/staging/comedi/comedi_fops.c:1453: error: for each function it appears in.) make[3]: *** [drivers/staging/comedi/comedi_fops.o] Error 1Odd. What changed in the header files to cause this?
Quoted 8 lines
The problem has always been present, only now did randconfig find it. The compile breaks because
PAGE_SHAREDis not defined for s390. The equivalent define for s390 isPAGE_RW. The problem has not shown up so far because all drivers who use theremap_pfn_rangecall withPAGE_SHAREDhas dependencies not available on s390, e.g.CONFIG_PCI.To fix this I see are two options: 1) add a
PAGE_SHAREDdefine toarch/s390/include/asm/pgtable.h, 2) make comedi depend on !S390.
I'll drop s390 support for comedi, it doesn't make sense at all for that platform.
Actually, I'll just go off of PCI/ISA/USB/PCMCIA, that should drop s390 automatically, right?
thanks,
greg k-h
Re: next-20091007 - comedi driver build breaks on S390x
Quoted 23 lines · On Wed, 7 Oct 2009 10:27:15 -0700 Greg KH <[email protected]> wrote:
Quoted 22 lines · Martin Schwidefsky
Quoted 5 lines · On Wed, 7 Oct 2009 06:07:44 -0700 Greg KH <[email protected]> wrote:
Quoted 4 lines · Kamalesh Babulal
Hi Greg,
next-20091007 randconfig build breaks on s390x with build errorQuoted 7 lines
Quoted 5 lines
drivers/staging/comedi/comedi_fops.c: In function 'comedi_mmap':drivers/staging/comedi/comedi_fops.c:1453: error: 'PAGE_SHARED' undeclared (first use in this function)drivers/staging/comedi/comedi_fops.c:1453: error: (Each undeclared identifier is reported only oncedrivers/staging/comedi/comedi_fops.c:1453: error: for each function it appears in.) make[3]: *** [drivers/staging/comedi/comedi_fops.o] Error 1Odd. What changed in the header files to cause this?
The problem has always been present, only now did randconfig find it. The compile breaks because
PAGE_SHAREDis not defined for s390. The equivalent define for s390 isPAGE_RW. The problem has not shown up so far because all drivers who use theremap_pfn_rangecall withPAGE_SHAREDhas dependencies not available on s390, e.g.CONFIG_PCI.
Quoted 8 lines
Quoted 2 lines
To fix this I see are two options: 1) add a
PAGE_SHAREDdefine toarch/s390/include/asm/pgtable.h, 2) make comedi depend on !S390.I'll drop s390 support for comedi, it doesn't make sense at all for that platform.
Actually, I'll just go off of PCI/ISA/USB/PCMCIA, that should drop s390 automatically, right?
Correct.
Signature · 4 lines
blue skies, Martin. "Reality continues to ruin my life." - Calvin.
PATCH 1/1 drbd: needs __ratelimit()
In reply to Stephen RothwellFrom: Randy Dunlap <[email protected]>
drbd_int.h uses __ratelimit(), so it needs to #include ratelimit.h:
drivers/block/drbd/drbd_int.h:1765: error: implicit declaration of function '__ratelimit'
--- drivers/block/drbd/drbd_int.h | 1 + 1 file changed, 1 insertion(+)
drivers/block/drbd/drbd_int.h +1 -0
@@ -34,6 +34,7 @@#include <linux/bitops.h> #include <linux/slab.h> #include <linux/crypto.h> +#include <linux/ratelimit.h> #include <linux/tcp.h> #include <linux/mutex.h> #include <linux/major.h>
Re: [PATCH -next] drbd: needs __ratelimit()
Quoted 5 lines · Randy Dunlap
From: Randy Dunlap <[email protected]>
drbd_int.huses__ratelimit(), so it needs to #includeratelimit.h:
drivers/block/drbd/drbd_int.h:1765: error: implicit declaration of function '__ratelimit'
Thanks Randy, applied.
Signature · 1 line
Jens Axboe
PATCH 1/1 vbus: proxy uses, select IOQ
In reply to Stephen RothwellFrom: Randy Dunlap <[email protected]>
vbus-proxy also uses ioq, so it should select IOQ.
When CONFIG_VBUS_PROXY=[ym] and VBUS_PCIBRIDGE=n:
ERROR: "ioq_init" [drivers/vbus/vbus-proxy.ko] undefined!
--- drivers/vbus/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/vbus/Kconfig +1 -0
@@ -5,6 +5,7 @@ config VBUS_PROXY tristate "Virtual-Bus support" select SHM_SIGNAL + select IOQ default n help Adds support for a virtual-bus model drivers in a guest to connect
Re: [PATCH -next] vbus: proxy uses, select IOQ
Quoted 10 lines · Randy Dunlap
From: Randy Dunlap <[email protected]>
vbus-proxy also uses ioq, so it should select IOQ.
When
CONFIG_VBUS_PROXY=[ym]and VBUS_PCIBRIDGE=n:ERROR: "
ioq_init" [drivers/vbus/vbus-proxy.ko] undefined!Signed-off-by Randy Dunlap <[email protected]>Cc Gregory Haskins <[email protected]>
Thanks Randy, applied.
Kind Regards,
-Greg
Re: linux-next: Tree for October 7 (libertas build failure)
In reply to Stephen RothwellQuoted 3 lines · On Wed, 7 Oct 2009 17:35:17 +1100 Stephen Rothwell wrote:
Hi all,
Changes since 20091006:
drivers/built-in.o: In function `lbs_cfg_free':
(.text+0x3479e0): undefined reference to wiphy_unregister' drivers/built-in.o: In function lbs_cfg_free':
(.text+0x3479e7): undefined reference to wiphy_free' drivers/built-in.o: In function lbs_cfg_register':
(.text+0x347a52): undefined reference to wiphy_register' drivers/built-in.o: In function lbs_cfg_alloc':
(.text+0x347acf): undefined reference to `wiphy_new'
(rand)config attached.
---
~Randy
Re: linux-next: Tree for October 7 (libertas build failure)
Quoted 7 lines · Randy Dunlap
Quoted 3 lines · On Wed, 7 Oct 2009 17:35:17 +1100 Stephen Rothwell wrote:
Hi all,
Changes since 20091006:
Quoted 8 lines
drivers/built-in.o: In function `lbs_cfg_free':
(.text+0x3479e0): undefined reference towiphy_unregister' drivers/built-in.o: In functionlbs_cfg_free':
(.text+0x3479e7): undefined reference towiphy_free' drivers/built-in.o: In functionlbs_cfg_register':
(.text+0x347a52): undefined reference towiphy_register' drivers/built-in.o: In functionlbs_cfg_alloc':
(.text+0x347acf): undefined reference to `wiphy_new'
Holger, perhaps we need some Kconfig updates to select cfg80211?
Dan
Johannes Berg
maintainerRe: linux-next: Tree for October 7 (libertas build failure)
Quoted 10 lines · Dan Williams
Quoted 8 lines
drivers/built-in.o: In function `lbs_cfg_free':
(.text+0x3479e0): undefined reference towiphy_unregister' drivers/built-in.o: In functionlbs_cfg_free':
(.text+0x3479e7): undefined reference towiphy_free' drivers/built-in.o: In functionlbs_cfg_register':
(.text+0x347a52): undefined reference towiphy_register' drivers/built-in.o: In functionlbs_cfg_alloc':
(.text+0x347acf): undefined reference to `wiphy_new'Holger, perhaps we need some
Kconfigupdates to select cfg80211?
Depend on, please -- cfg80211 has dependencies that would otherwise be messed up.
johannes
Re: linux-next: Tree for October 7 (wireless/wext)
In reply to Stephen RothwellQuoted 3 lines · On Wed, 7 Oct 2009 17:35:17 +1100 Stephen Rothwell wrote:
Hi all,
Changes since 20091006:
net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler' make[3]: *** [net/wireless/wext-priv.o] Error 1
config attached.
---
~Randy
PATCH 1/1 wireless: make WEXT_SPY and WEXT_PRIV select WEXT_CORE
Should prevent this build error reported by Randy...
net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler' make[3]: *** [net/wireless/wext-priv.o] Error 1
--- net/wireless/Kconfig | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
net/wireless/Kconfig +2 -0
@@ -12,9 +12,11 @@ config WEXT_PROC config WEXT_SPY bool + depends on WEXT_CORE config WEXT_PRIV bool + depends on WEXT_CORE config CFG80211 tristate "cfg80211 - wireless configuration API"
Signature · 1 line
1.6.2.5
Re: [PATCH] wireless: make WEXT_SPY and WEXT_PRIV select WEXT_CORE
Quoted 7 lines · John W. Linville
Should prevent this build error reported by Randy...
net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler' make[3]: *** [net/wireless/wext-priv.o] Error 1Reported-by Randy Dunlap <[email protected]>Signed-off-by John W. Linville <[email protected]>
Sorry, it did not work for me.
linux-next-20091007/net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler' make[3]: *** [net/wireless/wext-priv.o] Error 1
Drivers like hostap and orinoco (hermes) select WEXT_PRIV regardless of the setting of WEXT_CORE. oh, and staging/ drivers do that also.
Quoted 12 lines
net/wireless/Kconfig +2
-0@@ -12,9 +12,11 @@ config WEXT_PROC config WEXT_SPY bool + depends on WEXT_CORE config WEXT_PRIV bool + depends on WEXT_CORE config CFG80211 tristate "cfg80211 - wireless configuration API"
Johannes Berg
maintainerRe: [PATCH] wireless: make WEXT_SPY and WEXT_PRIV select WEXT_CORE
Quoted 9 lines · Randy Dunlap
Quoted 7 lines · John W. Linville
Should prevent this build error reported by Randy...
net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler' make[3]: *** [net/wireless/wext-priv.o] Error 1Reported-by Randy Dunlap <[email protected]>Signed-off-by John W. Linville <[email protected]>
Quoted 7 lines
Sorry, it did not work for me.
linux-next-20091007/net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler' make[3]: *** [net/wireless/wext-priv.o] Error 1Drivers like hostap and orinoco (hermes) select
WEXT_PRIVregardless of the setting ofWEXT_CORE. oh, and staging/ drivers do that also.
But they also select WIRELESS_EXT, which should cause WEXT_CORE to be turned on. Is it possible that is failing?
johannes
Re: [PATCH] wireless: make WEXT_SPY and WEXT_PRIV select WEXT_CORE
Quoted 11 lines · Johannes Berg
Quoted 9 lines · Randy Dunlap
Quoted 7 lines · John W. Linville
Should prevent this build error reported by Randy...
net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler' make[3]: *** [net/wireless/wext-priv.o] Error 1Reported-by Randy Dunlap <[email protected]>Signed-off-by John W. Linville <[email protected]>Sorry, it did not work for me.
Quoted 8 lines
Quoted 5 lines
linux-next-20091007/net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler' make[3]: *** [net/wireless/wext-priv.o] Error 1Drivers like hostap and orinoco (hermes) select
WEXT_PRIVregardless of the setting ofWEXT_CORE. oh, and staging/ drivers do that also.But they also select
WIRELESS_EXT, which should causeWEXT_COREto be turned on. Is it possible that is failing?
# CONFIG_WIRELESS is not setCONFIG_WIRELESS_EXT=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=y
WEXT_CORE is not enabled. I haven't found the culprit, but I suspect "select".
but what in WIRELESS_EXT would also cause WEXT_CORE to be enabled?
~Randy
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Johannes Berg
maintainerRe: [PATCH] wireless: make WEXT_SPY and WEXT_PRIV select WEXT_CORE
Quoted 9 lines · Randy Dunlap
Quoted 2 lines
But they also select
WIRELESS_EXT, which should causeWEXT_COREto be turned on. Is it possible that is failing?#
CONFIG_WIRELESSis not setCONFIG_WIRELESS_EXT=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=y
WEXT_COREis not enabled. I haven't found the culprit, but I suspect "select".
Interesting.
Quoted 1 line
but what in
WIRELESS_EXTwould also causeWEXT_COREto be enabled?
Well, the way WEXT_CORE is defined as def_bool y ought to, no?
johannes
Re: [PATCH] wireless: make WEXT_SPY and WEXT_PRIV select WEXT_CORE
Quoted 10 lines · On Thu, 08 Oct 2009 01:14:16 +0200 Johannes Berg wrote:
Quoted 8 lines · Randy Dunlap
Quoted 2 lines
But they also select
WIRELESS_EXT, which should causeWEXT_COREto be turned on. Is it possible that is failing?#
CONFIG_WIRELESSis not setCONFIG_WIRELESS_EXT=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=y
Quoted 7 lines
Quoted 1 line
WEXT_COREis not enabled. I haven't found the culprit, but I suspect "select".Interesting.
Quoted 1 line
but what in
WIRELESS_EXTwould also causeWEXT_COREto be enabled?Well, the way
WEXT_COREis defined asdef_booly ought to, no?
Ah, I see what you mean.
Here's what's happening:
net/wireless/Kconfig says:
config WEXT_CORE
def_bool y depends on CFG80211_WEXT || WIRELESS_EXT
and net/Kconfig says:
if WIRELESS
source "net/wireless/Kconfig"
source "net/mac80211/Kconfig"
endif # WIRELESS
so WEXT_CORE actually depends on NET && WIRELESS && (CFG80211_WEXT || WIRELESS_EXT) (that's what xconfig shows me).
But WIRELESS is not enabled. Pooh.
I was already toying with making CONFIG_WIRELESS a real/usable kconfig symbol. That may have to be done unless someone else comes up with another solution.
---
~Randy
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Johannes Berg
maintainerRe: [PATCH] wireless: make WEXT_SPY and WEXT_PRIV select WEXT_CORE
Quoted 34 lines · Randy Dunlap
Quoted 5 lines
Quoted 5 lines
#
CONFIG_WIRELESSis not setCONFIG_WIRELESS_EXT=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=yQuoted 7 lines
Quoted 1 line
WEXT_COREis not enabled. I haven't found the culprit, but I suspect "select".Interesting.
Quoted 1 line
but what in
WIRELESS_EXTwould also causeWEXT_COREto be enabled?Well, the way
WEXT_COREis defined asdef_booly ought to, no?Ah, I see what you mean.
Here's what's happening:
net/wireless/Kconfigsays:config
WEXT_COREdef_bool y depends on CFG80211_WEXT || WIRELESS_EXTand net/Kconfig says:
if WIRELESS
source "
net/wireless/Kconfig"
source "net/mac80211/Kconfig"endif # WIRELESS
Quoted 6 lines
so
WEXT_COREactually depends on NET && WIRELESS && (CFG80211_WEXT||WIRELESS_EXT) (that's what xconfig shows me).
But WIRELESS is not enabled. Pooh.I was already toying with making
CONFIG_WIRELESSa real/usable kconfig symbol. That may have to be done unless someone else comes up with another solution.
Ah!
It's kinda strange though that you can select wireless drivers without selecting WIRELESS. Maybe the solution is as simple as making WLAN (drivers/net/wireless/Kconfig) depend on WIRELESS?
johannes
Re: [PATCH] wireless: make WEXT_SPY and WEXT_PRIV select WEXT_CORE
Quoted 40 lines · On Thu, 08 Oct 2009 11:48:02 +0200 Johannes Berg wrote:
Quoted 38 lines · Randy Dunlap
Quoted 5 lines
Quoted 5 lines
#
CONFIG_WIRELESSis not setCONFIG_WIRELESS_EXT=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=yQuoted 7 lines
Quoted 1 line
WEXT_COREis not enabled. I haven't found the culprit, but I suspect "select".Interesting.
Quoted 1 line
but what in
WIRELESS_EXTwould also causeWEXT_COREto be enabled?Well, the way
WEXT_COREis defined asdef_booly ought to, no?Ah, I see what you mean.
Here's what's happening:
net/wireless/Kconfigsays:config
WEXT_COREdef_bool y depends on CFG80211_WEXT || WIRELESS_EXTand net/Kconfig says:
if WIRELESS
source "
net/wireless/Kconfig"
source "net/mac80211/Kconfig"endif # WIRELESS
so
WEXT_COREactually depends on NET && WIRELESS && (CFG80211_WEXT||WIRELESS_EXT) (that's what xconfig shows me).
But WIRELESS is not enabled. Pooh.
Quoted 8 lines
Quoted 2 lines
I was already toying with making
CONFIG_WIRELESSa real/usable kconfig symbol. That may have to be done unless someone else comes up with another solution.Ah!
It's kinda strange though that you can select wireless drivers without selecting WIRELESS. Maybe the solution is as simple as making WLAN (
drivers/net/wireless/Kconfig) depend on WIRELESS?
Yes, I think that would be a very good start.
---
~Randy
Johannes Berg
maintainerRe: [PATCH] wireless: make WEXT_SPY and WEXT_PRIV select WEXT_CORE
Quoted 5 lines · Randy Dunlap
Quoted 3 lines
It's kinda strange though that you can select wireless drivers without selecting WIRELESS. Maybe the solution is as simple as making WLAN (
drivers/net/wireless/Kconfig) depend on WIRELESS?Yes, I think that would be a very good start.
On the other hand, of course, the whole WIRELESS thing is somewhat stupid. How about this?
johannes
From: Johannes Berg <[email protected]>
Subject: wireless: make wireless drivers select core
It is somewhat non-sensical to allow selecting wireless drivers without showing wireless core code options, and since the wext refactoring this has made it possible to generate configurations that will not build. Avoid this and make wireless drivers select the wireless options.
--- drivers/net/wireless/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/net/wireless/Kconfig +1 -0
@@ -5,6 +5,7 @@ menuconfig WLAN bool "Wireless LAN" depends on !S390 + select WIRELESS default y ---help--- This section contains all the pre 802.11 and 802.11 wireless
Re: [PATCH] wireless: make WEXT_SPY and WEXT_PRIV select WEXT_CORE
Quoted 30 lines · On Thu, 08 Oct 2009 20:29:23 +0200 Johannes Berg wrote:
Quoted 5 lines · Randy Dunlap
Quoted 3 lines
It's kinda strange though that you can select wireless drivers without selecting WIRELESS. Maybe the solution is as simple as making WLAN (
drivers/net/wireless/Kconfig) depend on WIRELESS?Yes, I think that would be a very good start.
On the other hand, of course, the whole WIRELESS thing is somewhat stupid. How about this?
johannes
From: Johannes Berg <[email protected]>
Subject: wireless: make wireless drivers select coreIt is somewhat non-sensical to allow selecting wireless drivers without showing wireless core code options, and since the wext refactoring this has made it possible to generate configurations that will not build. Avoid this and make wireless drivers select the wireless options.
Signed-off-by Johannes Berg <[email protected]>--- drivers/net/wireless/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/net/wireless/Kconfig line 11
Quoted 7 lines
drivers/net/wireless/Kconfig +1
-0@@ -5,6 +5,7 @@ menuconfig WLAN bool "Wireless LAN" depends on !S390 + select WIRELESS default y ---help--- This section contains all the pre 802.11 and 802.11 wireless
I suppose that's OK, although I prefer "depends" rather than "select".
I tracked down one of the problems that I was seeing:
net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler'
with:
# CONFIG_WIRELESS is not setCONFIG_WIRELESS_EXT=yCONFIG_WEXT_PRIV=y
This is being caused by several drivers in drivers/staging/ doing
select WEXT_PRIV
without using either enough dependencies or even more (ugly) selects. (or just because kconfig isn't sufficient)
---
~Randy
Johannes Berg
maintainerRe: [PATCH] wireless: make WEXT_SPY and WEXT_PRIV select WEXT_CORE
Quoted 10 lines · Randy Dunlap
drivers/net/wireless/Kconfig line 11
Quoted 7 lines
menuconfig WLAN
drivers/net/wireless/Kconfig +1
-0bool "Wireless LAN" depends on !S390 + select WIRELESS default y ---help--- This section contains all the pre 802.11 and 802.11 wirelessI suppose that's OK, although I prefer "depends" rather than "select".
I tend to as well, but in this case the WIRELESS itself is just an option that makes other options invisible, it's not used elsewhere, and as such I think this is ok -- why hide the wireless drivers unless the user first selects the wireless core options?
OTOH, you already need to select cfg80211/mac80211 for most drivers, so I suppose "depends on WIRELESS" would be ok too.
Quoted 9 lines
I tracked down one of the problems that I was seeing:
net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler'with:
#CONFIG_WIRELESSis not setCONFIG_WIRELESS_EXT=yCONFIG_WEXT_PRIV=y
Quoted 4 lines
This is being caused by several drivers in
drivers/staging/doing
selectWEXT_PRIV
without using either enough dependencies or even more (ugly) selects. (or just because kconfig isn't sufficient)
Hah, staging/, well, that's kinda hard to solve I guess. Except by fixing all the staging/ drivers to depend on WIRELESS too, like the patch would do for the regular drivers.
I think you can get the same effect now with the non-staging drivers. I'll submit this patch formally and ask John to include it, and staging/ can just depend on WIRELESS.
johannes
Re: [PATCH] wireless: make WEXT_SPY and WEXT_PRIV select WEXT_CORE
Quoted 30 lines · Johannes Berg
Quoted 10 lines · Randy Dunlap
drivers/net/wireless/Kconfig line 11
Quoted 7 lines
menuconfig WLAN
drivers/net/wireless/Kconfig +1
-0bool "Wireless LAN" depends on !S390 + select WIRELESS default y ---help--- This section contains all the pre 802.11 and 802.11 wirelessI suppose that's OK, although I prefer "depends" rather than "select".
I tend to as well, but in this case the WIRELESS itself is just an option that makes other options invisible, it's not used elsewhere, and as such I think this is ok -- why hide the wireless drivers unless the user first selects the wireless core options?
OTOH, you already need to select cfg80211/mac80211 for most drivers, so I suppose "depends on WIRELESS" would be ok too.
Quoted 9 lines
I tracked down one of the problems that I was seeing:
net/wireless/wext-priv.c:206: error: implicit declaration of function 'call_commit_handler'with:
#CONFIG_WIRELESSis not setCONFIG_WIRELESS_EXT=yCONFIG_WEXT_PRIV=y
Quoted 8 lines
Quoted 4 lines
This is being caused by several drivers in
drivers/staging/doing
selectWEXT_PRIV
without using either enough dependencies or even more (ugly) selects. (or just because kconfig isn't sufficient)Hah, staging/, well, that's kinda hard to solve I guess. Except by fixing all the staging/ drivers to depend on WIRELESS too, like the patch would do for the regular drivers.
That's fine, I'll gladly take patches to do that.
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html