x86: hw-breakpoints: Actually flush thread breakpoints in flush_thread().
PATCH 1/1 x86: hw-breakpoints: Actually flush thread breakpoints in flush_thread().
[ I noticed this whilst hacking up SH support, applies to the current
tracing/hw-breakpoints topic branch. ]
flush_thread() tries to do a TIF_DEBUG check before calling in to flush_thread_hw_breakpoint() (which subsequently clears the thread flag), but for some reason, the x86 code is manually clearing TIF_DEBUG immediately before the test, so this path will never be taken.
This kills off the erroneous clear_tsk_thread_flag() and lets flush_thread_hw_breakpoint() actually get invoked.
Presumably folks were getting lucky with testing and the free_thread_info() -> free_thread_xstate() path was taking care of the flush there.
---
arch/x86/kernel/process.c | 2 -- 1 file changed, 2 deletions(-)
arch/x86/kernel/process.c +0 -2
@@ -110,8 +110,6 @@ void flush_thread(void) }#endif -clear_tsk_thread_flag (tsk,TIF_DEBUG ); -if (unlikely (test_tsk_thread_flag (tsk,TIF_DEBUG )))flush_thread_hw_breakpoint (tsk);memset (tsk->thread.tls_array,0 ,sizeof (tsk->thread.tls_array));
Quoted 11 lines · Paul Mundt
[ I noticed this whilst hacking up SH support, applies to the current
tracing/hw-breakpoints topic branch. ]
flush_thread()tries to do aTIF_DEBUGcheck before calling in toflush_thread_hw_breakpoint()(which subsequently clears the thread flag), but for some reason, the x86 code is manually clearingTIF_DEBUGimmediately before the test, so this path will never be taken.This kills off the erroneous
clear_tsk_thread_flag()and letsflush_thread_hw_breakpoint()actually get invoked.
Yes, this is wrong and we missed it. Thanks for fixing!
Quoted 5 lines
Presumably folks were getting lucky with testing and the
free_thread_info()->free_thread_xstate()path was taking care of the flush there.Signed-off-by Paul Mundt <[email protected]>
Quoted 15 lines · K.Prasad
Quoted 11 lines · Paul Mundt
[ I noticed this whilst hacking up SH support, applies to the current
tracing/hw-breakpoints topic branch. ]
flush_thread()tries to do aTIF_DEBUGcheck before calling in toflush_thread_hw_breakpoint()(which subsequently clears the thread flag), but for some reason, the x86 code is manually clearingTIF_DEBUGimmediately before the test, so this path will never be taken.This kills off the erroneous
clear_tsk_thread_flag()and letsflush_thread_hw_breakpoint()actually get invoked.Yes, this is wrong and we missed it. Thanks for fixing!
Quoted 9 lines
Quoted 5 lines
Presumably folks were getting lucky with testing and the
free_thread_info()->free_thread_xstate()path was taking care of the flush there.Signed-off-by Paul Mundt <[email protected]>Acked-by K.Prasad <[email protected]>
Ingo, are you planning on picking this up? Or is there a hw-breakpoints tree somewhere outside of -tip that I'm unaware of?
Quoted 20 lines · Paul Mundt
Quoted 19 lines · K.Prasad
Quoted 11 lines · Paul Mundt
[ I noticed this whilst hacking up SH support, applies to the current
tracing/hw-breakpoints topic branch. ]
flush_thread()tries to do aTIF_DEBUGcheck before calling in toflush_thread_hw_breakpoint()(which subsequently clears the thread flag), but for some reason, the x86 code is manually clearingTIF_DEBUGimmediately before the test, so this path will never be taken.This kills off the erroneous
clear_tsk_thread_flag()and letsflush_thread_hw_breakpoint()actually get invoked.Yes, this is wrong and we missed it. Thanks for fixing!
Quoted 4 lines
Presumably folks were getting lucky with testing and the
free_thread_info()->free_thread_xstate()path was taking care of the flush there.
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Signed-off-by Paul Mundt <[email protected]>Acked-by K.Prasad <[email protected]>Ingo, are you planning on picking this up? Or is there a hw-breakpoints tree somewhere outside of -tip that I'm unaware of?
Joining: Acked-by: Frederic Weisbecker <[email protected]>
Even if a rewrite on top of perf event is planned, this is still a fix on the current state. Something that the rewrite won't need to handle.
Thanks.
Quoted 20 lines · Paul Mundt
Quoted 19 lines · K.Prasad
Quoted 11 lines · Paul Mundt
[ I noticed this whilst hacking up SH support, applies to the current
tracing/hw-breakpoints topic branch. ]
flush_thread()tries to do aTIF_DEBUGcheck before calling in toflush_thread_hw_breakpoint()(which subsequently clears the thread flag), but for some reason, the x86 code is manually clearingTIF_DEBUGimmediately before the test, so this path will never be taken.This kills off the erroneous
clear_tsk_thread_flag()and letsflush_thread_hw_breakpoint()actually get invoked.Yes, this is wrong and we missed it. Thanks for fixing!
Quoted 4 lines
Presumably folks were getting lucky with testing and the
free_thread_info()->free_thread_xstate()path was taking care of the flush there.
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Signed-off-by Paul Mundt <[email protected]>Acked-by K.Prasad <[email protected]>Ingo, are you planning on picking this up? Or is there a hw-breakpoints tree somewhere outside of -tip that I'm unaware of?
I'm picking it.
Thanks.
Quoted 26 lines · Frederic Weisbecker
Quoted 25 lines · Paul Mundt
Quoted 24 lines · K.Prasad
Quoted 11 lines · Paul Mundt
[ I noticed this whilst hacking up SH support, applies to the current
tracing/hw-breakpoints topic branch. ]
flush_thread()tries to do aTIF_DEBUGcheck before calling in toflush_thread_hw_breakpoint()(which subsequently clears the thread flag), but for some reason, the x86 code is manually clearingTIF_DEBUGimmediately before the test, so this path will never be taken.This kills off the erroneous
clear_tsk_thread_flag()and letsflush_thread_hw_breakpoint()actually get invoked.Yes, this is wrong and we missed it. Thanks for fixing!
Quoted 5 lines
Presumably folks were getting lucky with testing and the
free_thread_info()->free_thread_xstate()path was taking care of the flush there.Signed-off-by Paul Mundt <[email protected]>Acked-by K.Prasad <[email protected]>
Quoted 7 lines
Quoted 2 lines
Ingo, are you planning on picking this up? Or is there a hw-breakpoints tree somewhere outside of -tip that I'm unaware of?
I'm picking it.
Thanks.
Thanks. If you're setting up a tree somewhere can you let me know where it will be hosted? I'm pretty much done with the SH support for the existing topic branch in -tip, but if it's being reworked, then I'd like to get my changes reworked and integrated as soon as possible.
Quoted 31 lines · Paul Mundt
Quoted 30 lines · Frederic Weisbecker
Quoted 27 lines · Paul Mundt
Quoted 15 lines · K.Prasad
Quoted 11 lines · Paul Mundt
[ I noticed this whilst hacking up SH support, applies to the current
tracing/hw-breakpoints topic branch. ]
flush_thread()tries to do aTIF_DEBUGcheck before calling in toflush_thread_hw_breakpoint()(which subsequently clears the thread flag), but for some reason, the x86 code is manually clearingTIF_DEBUGimmediately before the test, so this path will never be taken.This kills off the erroneous
clear_tsk_thread_flag()and letsflush_thread_hw_breakpoint()actually get invoked.Yes, this is wrong and we missed it. Thanks for fixing!
Quoted 9 lines
Quoted 5 lines
Presumably folks were getting lucky with testing and the
free_thread_info()->free_thread_xstate()path was taking care of the flush there.Signed-off-by Paul Mundt <[email protected]>Acked-by K.Prasad <[email protected]>Ingo, are you planning on picking this up? Or is there a hw-breakpoints tree somewhere outside of -tip that I'm unaware of?
Quoted 7 lines
Quoted 3 lines
I'm picking it.
Thanks.Thanks. If you're setting up a tree somewhere can you let me know where it will be hosted? I'm pretty much done with the SH support for the existing topic branch in -tip, but if it's being reworked, then I'd like to get my changes reworked and integrated as soon as possible.
I'm working on the v2 of the hardware breakpoints through perf integration. I've included your patch inside, I'll Cc you on the patches.
Quoted 4 lines · Paul Mundt
Thanks. If you're setting up a tree somewhere can you let me know where it will be hosted? I'm pretty much done with the SH support for the existing topic branch in -tip, but if it's being reworked, then I'd like to get my changes reworked and integrated as soon as possible.
Oh you have based SH breakpoint support on top of the current breakpoint API in -tip?
Hm, you should have talked to us about that since it's being reworked.
I'll probably post soon the rebase on top of perf events. And even if it gets merged in -tip, it should still be considered as very unstable.
May be should you better wait for it to get upstream?
Quoted 7 lines · Frederic Weisbecker
Quoted 4 lines · Paul Mundt
Thanks. If you're setting up a tree somewhere can you let me know where it will be hosted? I'm pretty much done with the SH support for the existing topic branch in -tip, but if it's being reworked, then I'd like to get my changes reworked and integrated as soon as possible.
Quoted 5 lines
Oh you have based SH breakpoint support on top of the current breakpoint API in -tip?
Hm, you should have talked to us about that since it's being reworked.
Strange, I thought that's what I was doing ;-)
Quoted 5 lines
I'll probably post soon the rebase on top of perf events. And even if it gets merged in -tip, it should still be considered as very unstable.
May be should you better wait for it to get upstream?
I wanted to get the initial support out of the way early to see if there was anything in the generic code that needed work, but apart from some minor stuff it's been kept fairly well isolated. The SH support I have works fine, but isn't a lot of code, and can trivially be reworked on top of whatever the new interface looks like. I've left out things like ptrace and kgdb stub integration precisely because I knew the code was being reworked.
Given that, I'm not in any particular rush, so whenever the reworked patches are available, I'll give them a run and rebase accordingly.
Quoted 6 lines · Paul Mundt
Quoted 5 lines
Oh you have based SH breakpoint support on top of the current breakpoint API in -tip?
Hm, you should have talked to us about that since it's being reworked.
Strange, I thought that's what I was doing ;-)
[...]
Quoted 10 lines
I wanted to get the initial support out of the way early to see if there was anything in the generic code that needed work, but apart from some minor stuff it's been kept fairly well isolated. The SH support I have works fine, but isn't a lot of code, and can trivially be reworked on top of whatever the new interface looks like. I've left out things like ptrace and kgdb stub integration precisely because I knew the code was being reworked.
Given that, I'm not in any particular rush, so whenever the reworked patches are available, I'll give them a run and rebase accordingly.
Ah ok. I was just worrying you thought the current state is stable. Ok, no problem then, Thanks. :)
[tip:perf/core] x86/hw-breakpoints: Actually flush thread breakpoints in flush_thread().
In reply to Paul MundtCommit-ID: 41a48d14f6991020c9bb6b93e289ca5b411ed09a Gitweb: http://git.kernel.org/tip/41a48d14f6991020c9bb6b93e289ca5b411ed09a Author: Paul Mundt <[email protected]> AuthorDate: Mon, 5 Oct 2009 19:23:06 +0900 Committer: Frederic Weisbecker <[email protected]> CommitDate: Tue, 3 Nov 2009 18:05:44 +0100
x86/hw-breakpoints: Actually flush thread breakpoints in flush_thread().
flush_thread() tries to do a TIF_DEBUG check before calling in to flush_thread_hw_breakpoint() (which subsequently clears the thread flag), but for some reason, the x86 code is manually clearing TIF_DEBUG immediately before the test, so this path will never be taken.
This kills off the erroneous clear_tsk_thread_flag() and lets flush_thread_hw_breakpoint() actually get invoked.
Presumably folks were getting lucky with testing and the free_thread_info() -> free_thread_xstate() path was taking care of the flush there.
LKML-Reference: <[email protected]>
--- arch/x86/kernel/process.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-)
arch/x86/kernel/process.c +0 -2
@@ -107,8 +107,6 @@ void flush_thread(void) }#endif -clear_tsk_thread_flag (tsk,TIF_DEBUG ); -if (unlikely (test_tsk_thread_flag (tsk,TIF_DEBUG )))flush_thread_hw_breakpoint (tsk);memset (tsk->thread.tls_array,0 ,sizeof (tsk->thread.tls_array));