ARM: remove unused declaration of fpundefinstr
Subsystems (3)
PATCH 1/6 ARM: remove unused declaration of fpundefinstr
The purpose of armksyms.c is to declare certain symbols and export them to modules. fpundefinstr is declared but not exported, and it has no definition anywhere in the kernel.
(The only other use of this name is inside a comment in nwfpe/entry.S,
as a "metavariable" in example code).
Build testing shows that the generated vmlinux is unchanged.
--- arch/arm/kernel/armksyms.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-)
arch/arm/kernel/armksyms.c +0 -2
@@ -47,8 +47,6 @@ extern void __aeabi_uidiv(void);extern void __aeabi_uidivmod (void );extern void __aeabi_ulcmp (void ); -extern void fpundefinstr (void ); -EXPORT_SYMBOL (__backtrace);
Signature · 1 line
1.6.3.2
PATCH 2/6 ARM: remove out of date comment
All exports are now versioned. See historical commit "Convert in-kernel users of EXPORT_SYMBOL_NOVERS() to EXPORT_SYMBOL()"
--- arch/arm/kernel/armksyms.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/kernel/armksyms.c +1 -1
@@ -24,7 +24,7 @@/* * libgcc functions - functions that are used internally by the * compiler... (prototypes are not correct though, but that -* doesn't really matter since they're not versioned). +* doesn't really matter). */ extern void __ashldi3 (void );extern void __ashrdi3 (void );
Signature · 1 line
1.6.3.2
PATCH 3/6 ARM: update Kconfig help text for floating point
In reply to Alan JenkinsWe do now support some floating point hardware. Update the help text for floating point emulation accordingly, and rename the enclosing Kconfig menu to "floating point support". Also remove a reference to the Acorn FPEmulator; the last public release was built for kernel version 2.2 and will not load on 2.6.[1]
[1] http://ftp.arm.linux.org.uk/pub/linux/arm/fpemulator/
--- arch/arm/Kconfig | 16 +++++++--------- 1 files changed, 7 insertions(+), 9 deletions(-)
arch/arm/Kconfig +7 -9
@@ -1411,21 +1411,19 @@ source "drivers/cpuidle/Kconfig" endmenu -menu "Floating point emulation" +menu "Floating point support" -comment "At least one emulation must be selected" +comment "At least one option must be selected" config FPE_NWFPE bool "NWFPE math emulation" depends on !AEABI || OABI_COMPAT ---help--- Say Y to include the NWFPE floating point emulator in the kernel. - This is necessary to run most binaries. Linux does not currently - support floating point hardware so you need to say Y here even if - your machine has an FPA or floating point co-processor podule. - - You may say N here if you are going to load the Acorn FPEmulator - early in the bootup. + This is necessary to run most old ABI binaries. Linux does not + support FPA floating point hardware, so you need to say Y here + even if your machine has an FPA or floating point co-processor + podule. config FPE_NWFPE_XP bool "Support extended precision"
@@ -1437,7 +1435,7 @@ config FPE_NWFPE_XP so in most cases this option only enlarges the size of the floating point emulator without any good reason. - You almost surely want to say N here. + You almost certainly want to say N here. config FPE_FASTFPE bool "FastFPE math emulation (EXPERIMENTAL)"
Signature · 1 line
1.6.3.2
PATCH 4/6 ARM: remove references to non-existent fastfpe
In reply to Alan Jenkins# Do we have FASTFPE? FASTFPE :=arch/arm/fastfpe ifeq ($(FASTFPE),$(wildcard $(FASTFPE))) FASTFPE_OBJ :=$(FASTFPE)/ endif fastfpe
We don't have FASTFPE. If this code still exists out of tree, it can surely maintain its own Makefile and Kconfig entries. Let's not confuse users by allowing them to select FASTFPE, and then silently not building it.
--- arch/arm/Kconfig | 14 -------------- arch/arm/Makefile | 7 ------- arch/arm/configs/acs5k_defconfig | 1 - arch/arm/configs/acs5k_tiny_defconfig | 1 - arch/arm/configs/afeb9260_defconfig | 1 - arch/arm/configs/ams_delta_defconfig | 1 - arch/arm/configs/assabet_defconfig | 1 - arch/arm/configs/at91cap9adk_defconfig | 1 - arch/arm/configs/at91rm9200dk_defconfig | 1 - arch/arm/configs/at91rm9200ek_defconfig | 1 - arch/arm/configs/at91sam9260ek_defconfig | 1 - arch/arm/configs/at91sam9261ek_defconfig | 1 - arch/arm/configs/at91sam9263ek_defconfig | 1 - arch/arm/configs/at91sam9g20ek_defconfig | 1 - arch/arm/configs/at91sam9rlek_defconfig | 1 - arch/arm/configs/ateb9200_defconfig | 1 - arch/arm/configs/badge4_defconfig | 1 - arch/arm/configs/cam60_defconfig | 1 - arch/arm/configs/carmeva_defconfig | 1 - arch/arm/configs/cerfcube_defconfig | 3 +-- arch/arm/configs/cm_x2xx_defconfig | 1 - arch/arm/configs/cm_x300_defconfig | 1 - arch/arm/configs/colibri_pxa270_defconfig | 1 - arch/arm/configs/colibri_pxa300_defconfig | 1 - arch/arm/configs/collie_defconfig | 1 - arch/arm/configs/corgi_defconfig | 1 - arch/arm/configs/cpu9260_defconfig | 1 - arch/arm/configs/cpu9g20_defconfig | 1 - arch/arm/configs/cpuat91_defconfig | 1 - arch/arm/configs/csb337_defconfig | 1 - arch/arm/configs/csb637_defconfig | 1 - arch/arm/configs/ebsa110_defconfig | 1 - arch/arm/configs/ecbat91_defconfig | 1 - arch/arm/configs/edb7211_defconfig | 1 - arch/arm/configs/em_x270_defconfig | 1 - arch/arm/configs/ep93xx_defconfig | 1 - arch/arm/configs/eseries_pxa_defconfig | 1 - arch/arm/configs/ezx_defconfig | 1 - arch/arm/configs/footbridge_defconfig | 1 - arch/arm/configs/fortunet_defconfig | 3 +-- arch/arm/configs/h3600_defconfig | 1 - arch/arm/configs/h5000_defconfig | 1 - arch/arm/configs/h7201_defconfig | 1 - arch/arm/configs/h7202_defconfig | 1 - arch/arm/configs/hackkit_defconfig | 1 - arch/arm/configs/integrator_defconfig | 1 - arch/arm/configs/iop13xx_defconfig | 1 - arch/arm/configs/iop32x_defconfig | 1 - arch/arm/configs/iop33x_defconfig | 1 - arch/arm/configs/ixp2000_defconfig | 1 - arch/arm/configs/ixp23xx_defconfig | 1 - arch/arm/configs/ixp4xx_defconfig | 1 - arch/arm/configs/jornada720_defconfig | 1 - arch/arm/configs/kafa_defconfig | 1 - arch/arm/configs/kb9202_defconfig | 1 - arch/arm/configs/ks8695_defconfig | 1 - arch/arm/configs/lart_defconfig | 1 - arch/arm/configs/loki_defconfig | 1 - arch/arm/configs/lpd270_defconfig | 1 - arch/arm/configs/lpd7a400_defconfig | 1 - arch/arm/configs/lpd7a404_defconfig | 1 - arch/arm/configs/lubbock_defconfig | 1 - arch/arm/configs/lusl7200_defconfig | 1 - arch/arm/configs/magician_defconfig | 1 - arch/arm/configs/mainstone_defconfig | 1 - arch/arm/configs/mv78xx0_defconfig | 1 - arch/arm/configs/mx1_defconfig | 1 - arch/arm/configs/mx1ads_defconfig | 1 - arch/arm/configs/mx21_defconfig | 1 - arch/arm/configs/mx27_defconfig | 1 - arch/arm/configs/mx3_defconfig | 1 - arch/arm/configs/n770_defconfig | 1 - arch/arm/configs/n8x0_defconfig | 1 - arch/arm/configs/neocore926_defconfig | 1 - arch/arm/configs/neponset_defconfig | 1 - arch/arm/configs/netwinder_defconfig | 1 - arch/arm/configs/netx_defconfig | 1 - arch/arm/configs/nhk8815_defconfig | 1 - arch/arm/configs/omap3_beagle_defconfig | 1 - arch/arm/configs/omap3_evm_defconfig | 1 - arch/arm/configs/omap3_pandora_defconfig | 1 - arch/arm/configs/omap_2430sdp_defconfig | 1 - arch/arm/configs/omap_apollon_2420_defconfig | 1 - arch/arm/configs/omap_generic_1510_defconfig | 1 - arch/arm/configs/omap_generic_1610_defconfig | 1 - arch/arm/configs/omap_generic_1710_defconfig | 1 - arch/arm/configs/omap_generic_2420_defconfig | 1 - arch/arm/configs/omap_h2_1610_defconfig | 1 - arch/arm/configs/omap_h4_2420_defconfig | 1 - arch/arm/configs/omap_innovator_1510_defconfig | 1 - arch/arm/configs/omap_innovator_1610_defconfig | 1 - arch/arm/configs/omap_ldp_defconfig | 1 - arch/arm/configs/omap_osk_5912_defconfig | 1 - arch/arm/configs/omap_perseus2_730_defconfig | 1 - arch/arm/configs/omap_zoom2_defconfig | 1 - arch/arm/configs/onearm_defconfig | 1 - arch/arm/configs/orion5x_defconfig | 1 - arch/arm/configs/palmte_defconfig | 1 - arch/arm/configs/palmtt_defconfig | 1 - arch/arm/configs/palmz71_defconfig | 1 - arch/arm/configs/palmz72_defconfig | 1 - arch/arm/configs/picotux200_defconfig | 1 - arch/arm/configs/pleb_defconfig | 1 - arch/arm/configs/pnx4008_defconfig | 1 - arch/arm/configs/pxa168_defconfig | 1 - arch/arm/configs/pxa255-idp_defconfig | 1 - arch/arm/configs/pxa3xx_defconfig | 1 - arch/arm/configs/pxa910_defconfig | 1 - arch/arm/configs/qil-a9260_defconfig | 1 - arch/arm/configs/realview-smp_defconfig | 1 - arch/arm/configs/realview_defconfig | 1 - arch/arm/configs/s3c2410_defconfig | 1 - arch/arm/configs/s3c6400_defconfig | 1 - arch/arm/configs/s5pc100_defconfig | 1 - arch/arm/configs/sam9_l9260_defconfig | 1 - arch/arm/configs/shannon_defconfig | 1 - arch/arm/configs/shark_defconfig | 1 - arch/arm/configs/simpad_defconfig | 1 - arch/arm/configs/spitz_defconfig | 1 - arch/arm/configs/stmp378x_defconfig | 1 - arch/arm/configs/stmp37xx_defconfig | 1 - arch/arm/configs/sx1_defconfig | 1 - arch/arm/configs/tct_hammer_defconfig | 1 - arch/arm/configs/trizeps4_defconfig | 1 - arch/arm/configs/u300_defconfig | 1 - arch/arm/configs/usb-a9260_defconfig | 1 - arch/arm/configs/usb-a9263_defconfig | 1 - arch/arm/configs/versatile_defconfig | 1 - arch/arm/configs/viper_defconfig | 1 - arch/arm/configs/w90p910_defconfig | 1 - arch/arm/configs/xcep_defconfig | 1 - arch/arm/kernel/setup.c | 2 +- 132 files changed, 3 insertions(+), 153 deletions(-)
arch/arm/Kconfig +0 -14
@@ -1437,20 +1437,6 @@ config FPE_NWFPE_XP You almost certainly want to say N here. -config FPE_FASTFPE - bool "FastFPE math emulation (EXPERIMENTAL)" - depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL - ---help--- - Say Y here to include the FAST floating point emulator in the kernel. - This is an experimental much faster emulator which now also has full - precision for the mantissa. It does not support any exceptions. - It is very simple, and approximately 3-6 times faster than NWFPE. - - It should be sufficient for most programs. It may be not suitable - for scientific calculations, but you have to check this for yourself. - If you do not feel you need a faster FP emulation you should better - choose NWFPE. - config VFP bool "VFP-format floating point maths" depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
arch/arm/Makefile +0 -7
@@ -211,17 +211,10 @@ endif export TEXT_OFFSET GZFLAGS MMUEXT -# Do we have FASTFPE? -FASTFPE :=arch/arm/fastfpe -ifeq ($(FASTFPE),$(wildcard $(FASTFPE))) -FASTFPE_OBJ :=$(FASTFPE)/ -endif - # If we have a machine-specific directory, then include it in the build. core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ core-y += $(machdirs) $(platdirs) core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ -core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
arch/arm/configs/acs5k_defconfig +0 -1
@@ -280,7 +280,6 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/acs5k_tiny_defconfig +0 -1
@@ -260,7 +260,6 @@ CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/afeb9260_defconfig +0 -1
@@ -302,7 +302,6 @@ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/ams_delta_defconfig +0 -1
@@ -286,7 +286,6 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000, # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/assabet_defconfig +0 -1
@@ -169,7 +169,6 @@ CONFIG_CPU_FREQ_SA1110=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/at91cap9adk_defconfig +0 -1
@@ -253,7 +253,6 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/at91rm9200dk_defconfig +0 -1
@@ -200,7 +200,6 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/at91rm9200ek_defconfig +0 -1
@@ -191,7 +191,6 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/at91sam9260ek_defconfig +0 -1
@@ -257,7 +257,6 @@ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/at91sam9261ek_defconfig +0 -1
@@ -250,7 +250,6 @@ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/at91sam9263ek_defconfig +0 -1
@@ -250,7 +250,6 @@ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/at91sam9g20ek_defconfig +0 -1
@@ -261,7 +261,6 @@ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/at91sam9rlek_defconfig +0 -1
@@ -248,7 +248,6 @@ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/de # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/ateb9200_defconfig +0 -1
@@ -202,7 +202,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/badge4_defconfig +0 -1
@@ -172,7 +172,6 @@ CONFIG_CPU_FREQ_SA1100=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/cam60_defconfig +0 -1
@@ -269,7 +269,6 @@ CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jff # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/carmeva_defconfig +0 -1
@@ -150,7 +150,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/cerfcube_defconfig +1 -2
@@ -178,8 +178,7 @@ CONFIG_CPU_FREQ_SA1110=y # # At least one emulation must be selected # -# CONFIG_FPE_NWFPE is not set -CONFIG_FPE_FASTFPE=y +CONFIG_FPE_NWFPE=y # # Userspace binary formats
arch/arm/configs/cm_x2xx_defconfig +0 -1
@@ -314,7 +314,6 @@ CONFIG_CMDLINE="root=1f03 mem=32M" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/cm_x300_defconfig +0 -1
@@ -335,7 +335,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/colibri_pxa270_defconfig +0 -1
@@ -287,7 +287,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/colibri_pxa300_defconfig +0 -1
@@ -298,7 +298,6 @@ CONFIG_CPU_IDLE_GOV_LADDER=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/collie_defconfig +0 -1
@@ -203,7 +203,6 @@ CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/corgi_defconfig +0 -1
@@ -308,7 +308,6 @@ CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/cpu9260_defconfig +0 -1
@@ -313,7 +313,6 @@ CONFIG_CMDLINE="" # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/cpu9g20_defconfig +0 -1
@@ -303,7 +303,6 @@ CONFIG_CMDLINE="" # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/cpuat91_defconfig +0 -1
@@ -313,7 +313,6 @@ CONFIG_CMDLINE="" # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/csb337_defconfig +0 -1
@@ -275,7 +275,6 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/csb637_defconfig +0 -1
@@ -297,7 +297,6 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/ebsa110_defconfig +0 -1
@@ -140,7 +140,6 @@ CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -CONFIG_FPE_FASTFPE=y # # Userspace binary formats
arch/arm/configs/ecbat91_defconfig +0 -1
@@ -266,7 +266,6 @@ CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 r # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/edb7211_defconfig +0 -1
@@ -137,7 +137,6 @@ CONFIG_CMDLINE="" # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/em_x270_defconfig +0 -1
@@ -299,7 +299,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=m # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/ep93xx_defconfig +0 -1
@@ -283,7 +283,6 @@ CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp" # CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/eseries_pxa_defconfig +0 -1
@@ -297,7 +297,6 @@ CONFIG_ATAGS_PROC=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/ezx_defconfig +0 -1
@@ -279,7 +279,6 @@ CONFIG_ATAGS_PROC=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/footbridge_defconfig +0 -1
@@ -148,7 +148,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/fortunet_defconfig +1 -2
@@ -132,8 +132,7 @@ CONFIG_CMDLINE="" # # At least one emulation must be selected # -# CONFIG_FPE_NWFPE is not set -CONFIG_FPE_FASTFPE=y +CONFIG_FPE_NWFPE=y # # Userspace binary formats
arch/arm/configs/h3600_defconfig +0 -1
@@ -178,7 +178,6 @@ CONFIG_CPU_FREQ_SA1100=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/h5000_defconfig +0 -1
@@ -285,7 +285,6 @@ CONFIG_ATAGS_PROC=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/h7201_defconfig +0 -1
@@ -133,7 +133,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/h7202_defconfig +0 -1
@@ -137,7 +137,6 @@ CONFIG_CMDLINE="console=ttyS0,19200" # CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/hackkit_defconfig +0 -1
@@ -171,7 +171,6 @@ CONFIG_CPU_FREQ_SA1100=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/integrator_defconfig +0 -1
@@ -176,7 +176,6 @@ CONFIG_CPU_FREQ_INTEGRATOR=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/iop13xx_defconfig +0 -1
@@ -233,7 +233,6 @@ CONFIG_CMDLINE="ip=bootp root=nfs console=ttyS0,115200 nfsroot=,tcp,v3,wsize=819 # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/iop32x_defconfig +0 -1
@@ -237,7 +237,6 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writeall # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/iop33x_defconfig +0 -1
@@ -233,7 +233,6 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writeall # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/ixp2000_defconfig +0 -1
@@ -215,7 +215,6 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M at 0x0" # CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/ixp23xx_defconfig +0 -1
@@ -211,7 +211,6 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp" # CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/ixp4xx_defconfig +0 -1
@@ -263,7 +263,6 @@ CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/jornada720_defconfig +0 -1
@@ -304,7 +304,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/kafa_defconfig +0 -1
@@ -195,7 +195,6 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/kb9202_defconfig +0 -1
@@ -319,7 +319,6 @@ CONFIG_ATAGS_PROC=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/ks8695_defconfig +0 -1
@@ -279,7 +279,6 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/lart_defconfig +0 -1
@@ -165,7 +165,6 @@ CONFIG_CPU_FREQ_SA1100=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/loki_defconfig +0 -1
@@ -246,7 +246,6 @@ CONFIG_CMDLINE="" # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/lpd270_defconfig +0 -1
@@ -204,7 +204,6 @@ CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/lpd7a400_defconfig +0 -1
@@ -148,7 +148,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/lpd7a404_defconfig +0 -1
@@ -178,7 +178,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/lubbock_defconfig +0 -1
@@ -152,7 +152,6 @@ CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/lusl7200_defconfig +0 -1
@@ -127,7 +127,6 @@ CONFIG_CMDLINE="console=tty0 console=ttyLU1,115200 root=/dev/ram initrd=0xf10000 # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/magician_defconfig +0 -1
@@ -302,7 +302,6 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/mainstone_defconfig +0 -1
@@ -142,7 +142,6 @@ CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/mv78xx0_defconfig +0 -1
@@ -274,7 +274,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y #
arch/arm/configs/mx1_defconfig +0 -1
@@ -275,7 +275,6 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/mx1ads_defconfig +0 -1
@@ -139,7 +139,6 @@ CONFIG_CMDLINE="console=ttySMX0,57600n8 ip=bootp root=/dev/nfs" # CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y -CONFIG_FPE_FASTFPE=y # # Userspace binary formats
arch/arm/configs/mx21_defconfig +0 -1
@@ -271,7 +271,6 @@ CONFIG_CMDLINE="" # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/mx27_defconfig +0 -1
@@ -293,7 +293,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/mx3_defconfig +0 -1
@@ -303,7 +303,6 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y #
arch/arm/configs/n770_defconfig +0 -1
@@ -288,7 +288,6 @@ CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/n8x0_defconfig +0 -1
@@ -323,7 +323,6 @@ CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y #
arch/arm/configs/neocore926_defconfig +0 -1
@@ -292,7 +292,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/neponset_defconfig +0 -1
@@ -175,7 +175,6 @@ CONFIG_CPU_FREQ_SA1110=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/netwinder_defconfig +0 -1
@@ -142,7 +142,6 @@ CONFIG_CMDLINE="root=0x301" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/netx_defconfig +0 -1
@@ -183,7 +183,6 @@ CONFIG_CMDLINE="console=ttySMX0,115200" # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/nhk8815_defconfig +0 -1
@@ -281,7 +281,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/omap3_beagle_defconfig +0 -1
@@ -304,7 +304,6 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.16 # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y # CONFIG_NEON is not set
arch/arm/configs/omap3_evm_defconfig +0 -1
@@ -316,7 +316,6 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.16 # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y CONFIG_NEON=y
arch/arm/configs/omap3_pandora_defconfig +0 -1
@@ -300,7 +300,6 @@ CONFIG_CMDLINE=" debug " # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y CONFIG_NEON=y
arch/arm/configs/omap_2430sdp_defconfig +0 -1
@@ -280,7 +280,6 @@ CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ra # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/omap_apollon_2420_defconfig +0 -1
@@ -277,7 +277,6 @@ CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600 # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y #
arch/arm/configs/omap_generic_1510_defconfig +0 -1
@@ -285,7 +285,6 @@ CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/omap_generic_1610_defconfig +0 -1
@@ -287,7 +287,6 @@ CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/omap_generic_1710_defconfig +0 -1
@@ -281,7 +281,6 @@ CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/omap_generic_2420_defconfig +0 -1
@@ -274,7 +274,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/omap_h2_1610_defconfig +0 -1
@@ -311,7 +311,6 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x106000 # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/omap_h4_2420_defconfig +0 -1
@@ -284,7 +284,6 @@ CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ra # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/omap_innovator_1510_defconfig +0 -1
@@ -285,7 +285,6 @@ CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/omap_innovator_1610_defconfig +0 -1
@@ -286,7 +286,6 @@ CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M r # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/omap_ldp_defconfig +0 -1
@@ -299,7 +299,6 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.16 # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y # CONFIG_NEON is not set
arch/arm/configs/omap_osk_5912_defconfig +0 -1
@@ -299,7 +299,6 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/omap_perseus2_730_defconfig +0 -1
@@ -280,7 +280,6 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/omap_zoom2_defconfig +0 -1
@@ -317,7 +317,6 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.16 # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y # CONFIG_NEON is not set
arch/arm/configs/onearm_defconfig +0 -1
@@ -236,7 +236,6 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/orion5x_defconfig +0 -1
@@ -289,7 +289,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y #
arch/arm/configs/palmte_defconfig +0 -1
@@ -272,7 +272,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/palmtt_defconfig +0 -1
@@ -246,7 +246,6 @@ CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/palmz71_defconfig +0 -1
@@ -276,7 +276,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/palmz72_defconfig +0 -1
@@ -286,7 +286,6 @@ CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/picotux200_defconfig +0 -1
@@ -236,7 +236,6 @@ CONFIG_KEXEC=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/pleb_defconfig +0 -1
@@ -164,7 +164,6 @@ CONFIG_CPU_FREQ_SA1100=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/pnx4008_defconfig +0 -1
@@ -182,7 +182,6 @@ CONFIG_CMDLINE="mem=64M console=ttyS0,115200" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/pxa168_defconfig +0 -1
@@ -268,7 +268,6 @@ CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip= # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/pxa255-idp_defconfig +0 -1
@@ -141,7 +141,6 @@ CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/pxa3xx_defconfig +0 -1
@@ -328,7 +328,6 @@ CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip= # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/pxa910_defconfig +0 -1
@@ -268,7 +268,6 @@ CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip= # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/qil-a9260_defconfig +0 -1
@@ -268,7 +268,6 @@ CONFIG_CMDLINE="mem=64M console=ttyS1,115200" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/realview-smp_defconfig +0 -1
@@ -281,7 +281,6 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=tt # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y #
arch/arm/configs/realview_defconfig +0 -1
@@ -275,7 +275,6 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=tt # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y #
arch/arm/configs/s3c2410_defconfig +0 -1
@@ -363,7 +363,6 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" # CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/s3c6400_defconfig +0 -1
@@ -274,7 +274,6 @@ CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x510 # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y #
arch/arm/configs/s5pc100_defconfig +0 -1
@@ -291,7 +291,6 @@ CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttyS # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/sam9_l9260_defconfig +0 -1
@@ -249,7 +249,6 @@ CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/shannon_defconfig +0 -1
@@ -161,7 +161,6 @@ CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linux # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/shark_defconfig +0 -1
@@ -261,7 +261,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/simpad_defconfig +0 -1
@@ -165,7 +165,6 @@ CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 roo # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/spitz_defconfig +0 -1
@@ -305,7 +305,6 @@ CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/stmp378x_defconfig +0 -1
@@ -280,7 +280,6 @@ CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M" # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/stmp37xx_defconfig +0 -1
@@ -265,7 +265,6 @@ CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/sx1_defconfig +0 -1
@@ -286,7 +286,6 @@ CONFIG_CMDLINE="" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/tct_hammer_defconfig +0 -1
@@ -283,7 +283,6 @@ CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/trizeps4_defconfig +0 -1
@@ -233,7 +233,6 @@ CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5" # CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/configs/u300_defconfig +0 -1
@@ -294,7 +294,6 @@ CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/usb-a9260_defconfig +0 -1
@@ -268,7 +268,6 @@ CONFIG_CMDLINE="mem=64M console=ttyS0,115200" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/usb-a9263_defconfig +0 -1
@@ -260,7 +260,6 @@ CONFIG_CMDLINE="mem=64M console=ttyS0,115200" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/versatile_defconfig +0 -1
@@ -184,7 +184,6 @@ CONFIG_CMDLINE="root=1f03 mem=32M" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y #
arch/arm/configs/viper_defconfig +0 -1
@@ -307,7 +307,6 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set -CONFIG_FPE_FASTFPE=y # # Userspace binary formats
arch/arm/configs/w90p910_defconfig +0 -1
@@ -264,7 +264,6 @@ CONFIG_ATAGS_PROC=y # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set #
arch/arm/configs/xcep_defconfig +0 -1
@@ -293,7 +293,6 @@ CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200" # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats
arch/arm/kernel/setup.c +1 -1
@@ -51,7 +51,7 @@#define MEM_SIZE (16*1024*1024)#endif -#if defined(CONFIG_FPE_NWFPE ) || defined(CONFIG_FPE_FASTFPE ) +#if defined(CONFIG_FPE_NWFPE )char fpe_type[8 ];static int __init fpe_setup (char *line)
Signature · 1 line
1.6.3.2
PATCH 4/6 ARM: remove references to non-existent fastfpe
Quoted 11 lines · Alan Jenkins
# Do we have FASTFPE? FASTFPE :=arch/arm/fastfpe ifeq ($(FASTFPE),$(wildcard $(FASTFPE))) FASTFPE_OBJ :=$(FASTFPE)/ endif fastfpeWe don't have FASTFPE. If this code still exists out of tree, it can surely maintain its own
MakefileandKconfigentries. Let's not confuse users by allowing them to select FASTFPE, and then silently not building it.
The code is not maintained anymore, but can just be slotted in (as per the recent request on the mailing list.) I'd rather not have the hastle of maintaining fastfpe patches thank you.
PATCH 4/6 ARM: remove references to non-existent fastfpe
Quoted 15 lines · Russell King - ARM Linux
Quoted 7 lines · Alan Jenkins
# Do we have FASTFPE? FASTFPE :=arch/arm/fastfpe ifeq ($(FASTFPE),$(wildcard $(FASTFPE))) FASTFPE_OBJ :=$(FASTFPE)/ endif fastfpeQuoted 5 lines
We don't have FASTFPE. If this code still exists out of tree, it can surely maintain its own
MakefileandKconfigentries. Let's not confuse users by allowing them to select FASTFPE, and then silently not building it.
Quoted 4 lines
The code is not maintained anymore, but can just be slotted in (as per the recent request on the mailing list.) I'd rather not have the hastle of maintaining fastfpe patches thank you.
Urk. The fine balancing act of limbo. Another possibility would be to provide a stub
#error "fastfpe not included; disable it or download it"
But if you want to just leave it, that's obviously your decision to make.
Regards
Alan
PATCH 4/6 ARM: remove references to non-existent fastfpe
Am Saturday 10 October 2009 10:41:08 schrieb Alan Jenkins:
Quoted 18 lines
Quoted 8 lines · Russell King - ARM Linux
Quoted 7 lines · Alan Jenkins
# Do we have FASTFPE? FASTFPE :=arch/arm/fastfpe ifeq ($(FASTFPE),$(wildcard $(FASTFPE))) FASTFPE_OBJ :=$(FASTFPE)/ endif fastfpeQuoted 8 lines
Quoted 4 lines
We don't have FASTFPE. If this code still exists out of tree, it can surely maintain its own
MakefileandKconfigentries. Let's not confuse users by allowing them to select FASTFPE, and then silently not building it.The code is not maintained anymore, but can just be slotted in (as per the recent request on the mailing list.) I'd rather not have the hastle of maintaining fastfpe patches thank you.
Quoted 6 lines
Urk. The fine balancing act of limbo. Another possibility would be to provide a stub
#error "fastfpe not included; disable it or download it"
But if you want to just leave it, that's obviously your decision to make.
I agree to Alan. It seems reasonable at least to include a stub as he suggests. However, since FastFPE was not updated for some years now, maybe the burden of maintaining patches is not so heavy in anymore? Maybe we can as well just include the latest version now? It becomes more and more difficult to find the source for someone who is interested in it.
What do you think?
Peter
PATCH 4/6 ARM: remove references to non-existent fastfpe
Quoted 5 lines · Peter Teichmann
I agree to Alan. It seems reasonable at least to include a stub as he suggests. However, since FastFPE was not updated for some years now, maybe the burden of maintaining patches is not so heavy in anymore? Maybe we can as well just include the latest version now? It becomes more and more difficult to find the source for someone who is interested in it.
The easiest and least risky approach would be to leave it as is - we know it's not causing any problems with it there, and it's not causing any run-time bloat.
PATCH 4/6 ARM: remove references to non-existent fastfpe
Quoted 9 lines · Russell King - ARM Linux
Quoted 6 lines · Peter Teichmann
I agree to Alan. It seems reasonable at least to include a stub as he suggests. However, since FastFPE was not updated for some years now, maybe the burden of maintaining patches is not so heavy in anymore? Maybe we can as well just include the latest version now? It becomes more and more difficult to find the source for someone who is interested in it.
Quoted 4 lines
The easiest and least risky approach would be to leave it as is - we know it's not causing any problems with it there, and it's not causing any run-time bloat.
Sure, if you don't like it, don't take it. All the patches in the "series" should stand on their own, with the exception of the last one (clearly labelled as "part 2" of the penultimate patch).
Hopefully, it should be trivial to establish the correctness of the patches 1 and 2 :-). But they are only cleanup attempts. The patch I really care about is the one I sent independently, "ARM: unexport symbols used to implement floating point emulation".
Regards
Alan
PATCH 5/6 ARM: nwfpe can no longer be built as a module - remove dead code (part 1 of 2)
In reply to Alan Jenkins"ifdef MODULE" and module information will be discarded by the C preprocessor, and the module_exit function will be discarded by the linker. Therefore this code is completely dead and should be removed.
Also remove an unused prototype for fp_setup().
Build testing confirms that this does not change the resulting vmlinux.
--- arch/arm/nwfpe/fpmodule.c | 33 +++++---------------------------- 1 files changed, 5 insertions(+), 28 deletions(-)
arch/arm/nwfpe/fpmodule.c +5 -28
@@ -23,7 +23,7 @@#include "fpa11.h" -#include <linux/module.h> +#include <linux/kernel.h> /* XXX */ #include <linux/errno.h>
@@ -40,21 +40,13 @@#include "fpmodule.h" #include "fpa11.inl" -/* kernel symbols required for signal handling */ #ifdef CONFIG_FPE_NWFPE_XP #define NWFPE_BITS "extended"#else #define NWFPE_BITS "double"#endif -#ifdef MODULE -void fp_send_sig (unsigned long sig,struct task_struct *p,int priv); -#else -#define fp_send_sig send_sig -#define kern_fp_enter fp_enter -extern char fpe_type[]; -#endif static int nwfpe_notify (struct notifier_block *self,unsigned long cmd,void *v) {
@@ -70,11 +62,8 @@ static struct notifier_block nwfpe_notifier_block = { .notifier_call = nwfpe_notify, }; -/* kernel function prototypes required */ -void fp_setup (void ); -/* external declarations for saved kernel symbols */ -extern void (*kern_fp_enter)(void ); +extern void (*fp_enter)(void );/* Original value of fp_enter from kernel before patched by fpe_init. */ static void (*orig_fp_enter)(void );
@@ -103,19 +92,12 @@ static int __init fpe_init(void)thread_register_notifier (&nwfpe_notifier_block);/* Save pointer to the old FP handler and then patch ourselves in */ - orig_fp_enter = kern_fp_enter; - kern_fp_enter = nwfpe_enter; + orig_fp_enter = fp_enter; + fp_enter = nwfpe_enter;return 0 ; } -static void __exit fpe_exit(void) -{ -thread_unregister_notifier (&nwfpe_notifier_block); -/* Restore the values we saved earlier. */ - kern_fp_enter = orig_fp_enter; -} -/* ScottB: November 4, 1998
@@ -170,12 +152,7 @@ void float_raise(signed char flags)/* Raise an exception if necessary. */ if (fpsr & (flags <<16 )) -fp_send_sig (SIGFPE , current,1 ); +send_sig (SIGFPE , current,1 ); }module_init (fpe_init); -module_exit (fpe_exit); - -MODULE_AUTHOR ("Scott Bambrough <[email protected]>" ); -MODULE_DESCRIPTION ("NWFPE floating point emulator (" NWFPE_BITS " precision)" ); -MODULE_LICENSE ("GPL" );
Signature · 1 line
1.6.3.2
PATCH 6/6 ARM: newfpe can no longer be compiled as a module - cleanup (part 2 of 2)
In reply to Alan JenkinsSince fpmodule can no longer be removed, it doesn't need to save the old value of fp_enter.
Also change module_init() to late_initcall() for consistency with vfp/vfpmodule.c. That will move it one step later, after the device initcalls, but it will still run before /sbin/init.
Build tested only.
--- arch/arm/nwfpe/fpmodule.c | 8 ++------ 1 files changed, 2 insertions(+), 6 deletions(-)
arch/arm/nwfpe/fpmodule.c +2 -6
@@ -65,9 +65,6 @@ static struct notifier_block nwfpe_notifier_block = {/* external declarations for saved kernel symbols */ extern void (*fp_enter)(void ); -/* Original value of fp_enter from kernel before patched by fpe_init. */ -static void (*orig_fp_enter)(void ); -/* forward declarations */ extern void nwfpe_enter (void );
@@ -91,8 +88,7 @@ static int __init fpe_init(void)thread_register_notifier (&nwfpe_notifier_block); -/* Save pointer to the old FP handler and then patch ourselves in */ - orig_fp_enter = fp_enter; +/* Patch ourselves in as the FP handler. */ fp_enter = nwfpe_enter;return 0 ;
@@ -155,4 +151,4 @@ void float_raise(signed char flags)send_sig (SIGFPE , current,1 ); } -module_init (fpe_init); +late_initcall (fpe_init);
Signature · 1 line
1.6.3.2