Modify code name SB900 to Hudson-2
Subsystems (4)
PATCH 1/1 Modify code name SB900 to Hudson-2
Hi Jean,
We have changed the name of SB900 chip, and the source needs change also. Please apply.
Thanks,
- Crane
---
Change SB900 to its formal code name Hudson-2.
--- Documentation/i2c/busses/i2c-piix4 | 2 +- drivers/i2c/busses/Kconfig | 2 +- drivers/i2c/busses/i2c-piix4.c | 4 ++-- include/linux/pci_ids.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)
Documentation/i2c/busses/i2c-piix4 +1 -1
@@ -8,7 +8,7 @@ Supported adapters: Datasheet: Only available via NDA from ServerWorks * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges Datasheet: Not publicly available - * AMD SB900 + * AMD Hudson-2 Datasheet: Not publicly available * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge Datasheet: Publicly available at the SMSC website http://www.smsc.com
drivers/i2c/busses/Kconfig +1 -1
@@ -128,7 +128,7 @@ config I2C_PIIX4 ATI SB600 ATI SB700 ATI SB800 - AMD SB900 + AMD Hudson-2 Serverworks OSB4 Serverworks CSB5 Serverworks CSB6
drivers/i2c/busses/i2c-piix4.c +2 -2
@@ -22,7 +22,7 @@ Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 ATI IXP200, IXP300, IXP400, SB600, SB700, SB800 - AMD SB900 + AMD Hudson-2 SMSC Victory66 Note: we assume there can only be one device, with one SMBus interface.
@@ -480,7 +480,7 @@ static struct pci_device_id piix4_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON_2_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
include/linux/pci_ids.h +1 -1
@@ -543,7 +543,7 @@#define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450#define PCI_DEVICE_ID_AMD_8131_APIC 0x7451#define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458 -#define PCI_DEVICE_ID_AMD_SB900_SMBUS 0x780b +#define PCI_DEVICE_ID_AMD_HUDSON_2_SMBUS 0x780b#define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F#define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090#define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091
Signature · 1 line
1.6.0.4
Jean Delvare
AppliedHi Crane,
Quoted 9 lines · Crane Cai
Hi Jean,
We have changed the name of SB900 chip, and the source needs change also. Please apply.
Thanks,
- Crane---
Change SB900 to its formal code name Hudson-2.
Quoted 7 lines
Signed-off-by Crane Cai <[email protected]>--- Documentation/i2c/busses/i2c-piix4 | 2 +- drivers/i2c/busses/Kconfig | 2 +- drivers/i2c/busses/i2c-piix4.c | 4 ++-- include/linux/pci_ids.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)
Applied, thanks. Will go in kernel 2.6.32.
I have also added support to sensors-detect.
Signature · 1 line
Jean Delvare
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Jean,
Quoted 20 lines · Jean Delvare
Hi Crane,
Quoted 9 lines · Crane Cai
Hi Jean,
We have changed the name of SB900 chip, and the source needs change also. Please apply.
Thanks,
- Crane---
Change SB900 to its formal code name Hudson-2.Quoted 7 lines
Signed-off-by Crane Cai <[email protected]>--- Documentation/i2c/busses/i2c-piix4 | 2 +- drivers/i2c/busses/Kconfig | 2 +- drivers/i2c/busses/i2c-piix4.c | 4 ++-- include/linux/pci_ids.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)
Quoted 3 lines
Applied, thanks. Will go in kernel 2.6.32.
I have also added support to sensors-detect.
Thanks.
Signature · 2 lines
Best Regards, - Crane