Skip to contentSkip to conversation

WAN: fix Cisco HDLC handshaking.

PATCH Applied Krzysztof Halasa 2 participants 2 messages Oct 9, 2009 – Oct 13, 2009

Subsystems (3)
lore
Share & tools
lore

Krzysztof Halasa

author maintainer
#0 lore raw

PATCH 1/1 WAN: fix Cisco HDLC handshaking.

WAN: fix Cisco HDLC handshaking.

Cisco HDLC uses keepalive packets and sequence numbers to determine link state. In rare cases both ends could transmit keepalive packets at the same time, causing the received sequence numbers to be treated as incorrect. Now we accept our current sequence number as well as the previous one.

drivers/net/wan/hdlc_cisco.c +8 -10
index cf5fd17..f1bff98 100644
@@ -58,8 +58,7 @@ struct cisco_state {
 	spinlock_t lock;
 	unsigned long last_poll;
 	int up;
-	int request_sent;
-	u32 txseq; /* TX sequence number */
+	u32 txseq; /* TX sequence number, 0 = none */
 	u32 rxseq; /* RX sequence number */
 };
 
@@ -163,6 +162,7 @@ static int cisco_rx(struct sk_buff *skb)
 	struct cisco_packet *cisco_data;
 	struct in_device *in_dev;
 	__be32 addr, mask;
+	u32 ack;
 
 	if (skb->len < sizeof(struct hdlc_header))
 		goto rx_error;
@@ -223,8 +223,10 @@ static int cisco_rx(struct sk_buff *skb)
 		case CISCO_KEEPALIVE_REQ:
 			spin_lock(&st->lock);
 			st->rxseq = ntohl(cisco_data->par1);
-			if (st->request_sent &&
-			    ntohl(cisco_data->par2) == st->txseq) {
+			ack = ntohl(cisco_data->par2);
+			if (ack && (ack == st->txseq ||
+				    /* our current REQ may be in transit */
+				    ack == st->txseq - 1)) {
 				st->last_poll = jiffies;
 				if (!st->up) {
 					u32 sec, min, hrs, days;
@@ -275,7 +277,6 @@ static void cisco_timer(unsigned long arg)
 
 	cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, htonl(++st->txseq),
 			     htonl(st->rxseq));
-	st->request_sent = 1;
 	spin_unlock(&st->lock);
 
 	st->timer.expires = jiffies + st->settings.interval * HZ;
@@ -293,9 +294,7 @@ static void cisco_start(struct net_device *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&st->lock, flags);
-	st->up = 0;
-	st->request_sent = 0;
-	st->txseq = st->rxseq = 0;
+	st->up = st->txseq = st->rxseq = 0;
 	spin_unlock_irqrestore(&st->lock, flags);
 
 	init_timer(&st->timer);
@@ -317,8 +316,7 @@ static void cisco_stop(struct net_device *dev)
 
 	spin_lock_irqsave(&st->lock, flags);
 	netif_dormant_on(dev);
-	st->up = 0;
-	st->request_sent = 0;
+	st->up = st->txseq = 0;
 	spin_unlock_irqrestore(&st->lock, flags);
 }
 
Signature · 1 line
Krzysztof Halasa
maintainer Applied
#1 lore raw

From: Krzysztof Halasa <[email protected]>
Date: Fri, 09 Oct 2009 18:16:10 +0200

Quoted 8 lines

WAN: fix Cisco HDLC handshaking.

Cisco HDLC uses keepalive packets and sequence numbers to determine link state. In rare cases both ends could transmit keepalive packets at the same time, causing the received sequence numbers to be treated as incorrect. Now we accept our current sequence number as well as the previous one.

Applied, thanks!